| 1 |
THE EFFECT OF DARRIEUS AND SAVONIUS WIND TURBINES POSITION ON THE PERFORMANCE OF THE HYBRID WIND TURBINE AT LOW WIND SPEED |
Nawfal M. Ali, Abdul Hassan A. K, Sattar Aljabair, |
Volume 11,Issue 2,Year 2020 |
International Journal of Mechanical Engineering and Technology |
| 2 |
SECURE LOCATION MAP AND ENCRYPTION KEY BASED ON INTELLIGENCE SEARCH ALGORITHM IN ENCRYPTION AND STEGANOGRAPHY TO DATA PROTECTION |
Alaa Kadhim Farhan, Rasha Subhi Ali, Sura Mazin Ali, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 3 |
EXPERIMENTAL ANALYSIS OF TWO-PHASE FLOW THROUGH CYLINDERICAL OBSTRUCTION IN VERTICAL PIPE |
Isam Mejbel Abed, Rafel Hekmat Hameed, Laith Jaafer Habeeb, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 4 |
EXPERIMENTAL INVESTIGATION OF SOME PROPERTIES OF EPOXY REINFORCED BY EGG SHELL PARTICLES |
Ruaa Haitham Abdel-Rahim, Reem Alaa Mohammed, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 5 |
THERMAL PERFORMANCE OF WICKLESS HEAT PIPE WITH METHANOL AND ETHANOL WORKING FLUIDS |
Hussain Saad Abd, Hisham Assi Hoshi, Abdulmunem R. Abdulmunem, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 6 |
THE CONSTRUCTIONAL STRUCTURE AND ITS RELATION TO FORM IN LATE CONTEMPORARY ARCHITECTURE |
Waleed Khaled Yasser, Abbas Ali Hamza, |
Volume 10,Issue 3,Year 2019 |
International Journal of Civil Engineering and Technology |
| 7 |
EFFECT OF NUMBER OF PILES ON LOAD SHARING IN PILED RAFT FOUNDATION SYSTEM IN SATURATED GYPSEOUS SOIL |
Mohammed Y. Fattah, Moataz A. Al- Obaydi, Fouad A. Al- Jalabi, |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
| 8 |
WATER CUT COMPARISON FOR A REALLY SIMILAR GRIDDING SYSTEM (LINE DRIVE PATTERN) |
Jihad Husain Al-Joumaa, Mohammed S. Al-Jawad, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 9 |
PREPARATION OF NEW ALUMINUM MATRIX COMPOSITE REINFORCED WITH HYBRID NANO REINFORCEMENTS FE2O3 AND AL2O3 VIA (P/M) ROUTE |
H. J. M. Alalkawi, Ghada Adel Aziz, Hussain A. Aljawad, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 10 |
MICROSTRUCTURE ANALYSIS AND RESIDUAL STRENGTH OF FIBER REINFORCED ECO-FRIENDLY SELF-CONSOLIDATING CONCRETE SUBJECTED TO ELEVATED TEMPERATURE |
S. A. Salih , M. R. Aldikheeli , F. M. Al- Zwainy , |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
| 11 |
SIMULATION OF LOWERING GROUNDWATER IN THE RIGHT BANK OF DERBENDIKHAN DAM |
Maha R. Abdul Hameed, Yasser M. Kadhim, Ethar H. Abbas, Yahya Saber Khudhair, |
Volume 10,Issue 3,Year 2019 |
International Journal of Civil Engineering and Technology |
| 12 |
ADHESIVE WEAR BEHAVIOR OF AISI 1018 LOW CARBON STEEL UNDER DIFFERENT QUENCHING MEDIA |
Khansaa D Salman, |
Volume 10,Issue 2,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 13 |
EFFECT OF USING RECYCLED WASTE CONCRETE MATERIALS ON RUTTING BEHAVIOR OF HMA |
Mohammed A. Mahmoud, Ammar A. Shubber, Aqeel Raheem Jabur, |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
| 14 |
BOND STRESS-SLIP RELATIONSHIP IN REACTIVE POWDER CONCRETE BEAMS |
Eyad Kadhem, Ammar A. Ali, Sameh Badry Tobeia, |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
| 15 |
EVALUATION OF SOIL LIQUEFACTION POTENTIAL INDEX FOR BAGHDAD CITY, IRAQ |
H .H. Karim , Z. W. Samueel , D. A. Abdul Hussein, |
Volume 10,Issue 5,Year 2019 |
International Journal of Civil Engineering and Technology |
| 16 |
ASSESSMENT OF AL-FARIS AL-ARABEE SIGNALIZED INTERSECTION IN BAGHDAD PROVINCE USING COMPUTER SOFTWARE |
Humam H. Mohammed, |
Volume 10,Issue 10,Year 2019 |
International Journal of Civil Engineering and Technology |
| 17 |
ARCHITECTURAL AND TYPE |
Laheeb Ali Al-Sayigh, Asmaa M.H.Al-Moqaram, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
| 18 |
ARCHITECTURAL DESIGN METHODOLOGY BY TYPOLOGY |
Laheeb Ali Al-Sayigh, Asmaa M.H.Al-Moqaram, |
Volume 3,Issue 1,Year 2017 |
International Journal of Architecture |
| 19 |
DIGITAL BIOLOGICAL DESIGNING A LIVABLE RESIDENTIAL BUILDING |
Kameelah A Al-qassyi, Rana Mazin Mahdi, Enas Salim Abdul-Ahhad, |
Volume 3,Issue 2,Year 2017 |
International Journal of Architecture |
| 20 |
MODERNIZATION OF ARCHITECTURAL HERITAGE (APPLIED STUDY OF HERITAGE ISLAMIC ARCHITECTURALELEMENTS IN IRAQ) |
Rana Mazin Mahdi, Enas Salim Abdul-Ahhad, Hussam Jabbar, |
Volume 3,Issue 2,Year 2017 |
International Journal of Architecture |
| 21 |
THE ROLE OF PLANNING URBAN AXES IN THE SUSTAINABILITY OF IRAQI CITIES MOSUL-CASE STUDY |
Nada Abdulmueen Hasan, Wada Shuker Al-Hinkawi, Ahmed Alatta, |
Volume 3,Issue 2,Year 2017 |
International Journal of Architecture |
| 22 |
THE ARCHITECTURAL IDENTITY OF ARAB AND ISLAMIC CITIES |
Waleed Khaled Yasser, |
Volume 4,Issue 2,Year 2018 |
International Journal of Architecture |
| 23 |
TEACHING STRATEGIES AND THEIR IMPACT TO DEVELOPING THE THINKING SKILLS OF THE STUDENTS OF ARCHITECTURE |
Waleed Khaled Yasser, Abbas Ali Hamza, |
Volume 5,Issue 1,Year 2019 |
International Journal of Architecture |
| 24 |
FTTH BASED ON HYBRID WDM-OCDMA PON |
Ali Y. Fattah, |
Volume 11,Issue 10,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 25 |
MITIGATION OF POLARIZATION MODE DISPERSION IN OPTICAL COMMUNICATION SYSTEMS |
Ali Y. Fattah, |
Volume 11,Issue 10,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 26 |
INVESTIGATION THE PROPERTIES OF POLYESTER POLYMER MORTAR REINFORCED WITH RECYCLED GLASS POWDER |
Awham M Hameed, Entihaa Gatea Daway, Shyma Hameed Mohammad, |
Volume 9,Issue 13,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 27 |
IC-ENGINE PERFORMANCE USING MWCNT DISPERSED IN NON-EDIBLE SUNFLOWER OIL AS BIO LUBRICANT: EXPERIMENTAL INVESTIGATION |
Abdulmunem R.Abdulmunem, Mohammed Hassan Jabal, Hussain Saad Abd, Mohammed Hassan Jabal, |
Volume 9,Issue 13,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 28 |
CNTS AND NHA AS REINFORCEMENT TO IMPROVE FLEXURAL AND IMPACT PROPERTIES OF UHMWPE NANOCOMPOSITES FOR HIP JOINT APPLICATIONS |
Jawad Kadhim Oleiwi, Rana Afif Anaee, Safaa Hashim Radhi, |
Volume 9,Issue 11,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 29 |
THE MANUFACTURE AND CHARACTERIZATION OF ALUMINUM ALLOY METAL MATRIX NANO COMPOSITES |
Ibtihal A.Mahmood, Alistair Cree, |
Volume 9,Issue 11,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 30 |
INVESTAGATION OF THE PROCESS CAPABILITY OF WATER PUMP PLASTIC COVER MANUFACTURING |
Sohaib Khlil, Huthaifa Alkhazraji, Zina Alabacy, |
Volume 9,Issue 11,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 31 |
HANDICAPPED VOICE RECOGNITION CONTROL SYSTEM BASED ON HMM ALGORITHM |
Bashra Kadhim Oleiwi, Farah F. Alkhalid, Abdul Muhsin M, |
Volume 9,Issue 11,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 32 |
THE EFFECT OF BLANKING SHEAR ANGLE ON THE SHEARING FORCES OF BLANKED CARBON STEEL SHEETS |
Ali Abbar Khleif, Ahmad Saad Jasim, |
Volume 9,Issue 11,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 33 |
EXPERIMENTAL INVESTIGATION OF FLEXURAL AND IMPACT PROPERTIES OF PMMA REINFORCED BY BAMBOO AND RICE HUSK POWDERS |
Jawad Kadhim Oleiwi, Qahtan Adnan Hamad, Hadil Jabbar Abdul Rahman, |
Volume 9,Issue 10,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 34 |
FRACTURE TESTING CRACKED COMPONENTS WITH FINITE COMPLIANCE APPLIED DISPLACEMENTS |
Alokaidi S. H , Alalkawi H. J , |
Volume 9,Issue 9,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 35 |
OPTIMIZATION AND SYNTHESIS OF GOLD NANOPARTICLES ON N-TYPE POROUS SILICON SUBSTRATES AS HIGHLY-GAS SENSITIVE |
Wail H. Ali, Amer B. Dheyab, Alwan M. Alwan, |
Volume 9,Issue 9,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 36 |
EXPERIMENTAL AND NUMERICAL STUDY TO ENHANCE HEAT TRANSFER ON A HEAT EXCHANGER AL2O3/WATER NANOFLUID USING AN AIR FLOW WITH WATER DROPLETS |
Yasameen H. Abed, Abdulhassan A.Karamallah, Adel Mahmoud Saleh, |
Volume 6,Issue 9,Year 2015 |
International Journal of Mechanical Engineering and Technology |
| 37 |
THE EFFECT OF LSM CORROSION PROTECTION ON AL ALLOYS |
Shatha.A.Sameh , Hiba.K.Ismaeel , |
Volume 7,Issue 1,Year 2016 |
International Journal of Advanced Research in Engineering and Technology |
| 38 |
ELECTROCHEMICAL MEASUREMENTS OF ANODIZING STAINLESS STEEL TYPE AISI 304 |
Sami A. Ajeel, Basheer A. Abdul-Hussein, Yaqoob M. Baker, |
Volume 4,Issue 3,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 39 |
STRUCTURAL BEHAVIOR OF REED: EVALUATION OF TENSILE STRENGTH, ELASTICITY AND STRESS-STRAIN RELATIONSHIPS |
Adil M. Abdullatif, Tareq S. Al-Attar, |
Volume 4,Issue 1,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 40 |
CHARACTERIZATION OF PHYSICAL LAYER IMPAIRMENTS IMPACT ON OPTICAL FIBER TRANSMISSION SYSTEMS |
Suhail Al-Awis, Ali Y. Fattah, |
Volume 7,Issue 3,Year 2016 |
International Journal of Electronics and Communication Engineering and Technology |
| 41 |
STRATEGIC MANAGEMENT OF CUSTOMSLOGISTICS ACTIVITIES: INNOVATION, INTEGRATION AND REGIONAL ASPECTS |
Mikhail Yakovlevich Veselovsky, Marina Alekseevna Izmailova, Nasrullah Abdurakhmanovich Adamov, Natalia Borisovna Morozova, Ziya Elkhanovich Suleymanov, |
Volume 10,Issue 2,Year 2019 |
International Journal of Civil Engineering and Technology |
| 42 |
NONUNIFORMITY OF DIGITAL TRANSFORMATION OF INDUSTRY |
Julia Vladimirovna Gnezdova, Viktoria Evgenevna Barkovskaya, Ibragim Agaevich Ramazanov, Aleksei Anatolievich Latortsev, Svetlana Afanas'evna Kalugina, |
Volume 10,Issue 2,Year 2019 |
International Journal of Civil Engineering and Technology |
| 43 |
AN IMPROVED ALGORITHM TO FIRE DETECTION IN FOREST BY USING WIRELESS SENSOR NETWORKS |
Ghaida Muttashar Abdulsahib, Osamah Ibrahim Khalaf, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 44 |
EFFICIENT EVOLUTIONARY ALGORITHM FOR THE THIN-FILM SYNTHESIS USING THE EFFECTS OF MERIT FUNCTION |
M.F.A. Alias , M.A. Hussain , |
Volume 5,Issue 1,Year 2014 |
International Journal of Electrical Engineering and Technology |
| 45 |
EFFECT OF SALTY SOIL ON SUBSURFACE CONCRETE STRENGTH |
Aqeel Al-Adili, Sabs M. Sabih, |
Volume 10,Issue 1,Year 2019 |
International Journal of Civil Engineering and Technology |
| 46 |
IRAQI GYPSEOUS SOIL STABILIZED BY ORDINARY AND ENCASED STONE COLUMNS |
Hussein H. Karim, Zeena W. Samueel, Huda K. Karim, |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
| 47 |
EFFECT OF PLUG REMOVAL ON LOAD TRANSFER IN PLUGGED OPEN ENDED PILE BEHAVIOR |
Mohammed Y. Fattah, Nahla M. Salim, Asaad M.B Al-Gharrawi, |
Volume 7,Issue 5,Year 2016 |
International Journal of Civil Engineering and Technology |
| 48 |
RELIABILITY BASED ANALYSIS OF BEARING CAPACITY OF FOOTINGS ON SOFT SOIL STRENGTHENED BY STONE COLUMNS |
Mohammed Y. Fattah, Mohammed A. Al-Neami, Ahmed S. H. Al-Suhaily, |
Volume 7,Issue 4,Year 2016 |
International Journal of Civil Engineering and Technology |
| 49 |
BEARING CAPACITY OF STRIP FOOTING RESTING ON DUNE SANDS STABILIZED BY GROUTING WITH LIME-SILICA FUME MIX |
Mohammed Y. Fattah, Hasan H. Joni, Ahmed S. A. Al-Dulaimy, |
Volume 7,Issue 2,Year 2016 |
International Journal of Civil Engineering and Technology |
| 50 |
APPLYING FIXED BOX MODEL TO PREDICT THE CONCENTRATIONS OF (PM10) IN A PART OF AL-KUT CITY, WASIT PROVINCE (IRAQ) |
Ali Abdul Khaliq Kamal, Abdul Razzak T. Ziboon, Zainab Bahaa Mohammed, |
Volume 7,Issue 2,Year 2016 |
International Journal of Civil Engineering and Technology |
| 51 |
DYNAMIC RESPONSE OF CONCRETE GRAVITY DAM ON RANDOM SOIL |
Atheer Zaki Mohsin, Hassan Ali Omran, Abdul-Hassan K. Al-Shukur, |
Volume 6,Issue 11,Year 2015 |
International Journal of Civil Engineering and Technology |
| 52 |
DEVELOPMENT OF THE ARTIFICIAL NEURAL NETWORK MODEL FOR PREDICTION OF IRAQI EXPRESS WAYS CONSTRUCTION COST |
Tareq Abdul Majeed Khaleel, |
Volume 6,Issue 10,Year 2015 |
International Journal of Civil Engineering and Technology |
| 53 |
EXPERIMENTAL AND THEORTICAL STUDY OF THE THERMAL PERFORMANCE OF HEAT PIPE HEAT EXCHANGER |
Abdulsalam D.Mohamed, Aamer M.Al-Dabagh, Duaa A.Diab, |
Volume 7,Issue 3,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 54 |
THE MEASUREMENT OF LAMINAR BURNING VELOCITIES AND MARKSTEIN NUMBERS FOR HYDROGEN ENRICHED NATURAL GAS |
Miqdam Tariq Chaichan, |
Volume 4,Issue 6,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 55 |
OPTIMIZATION OF ELECTRODE WEAR RATE ON ELECTRICAL DISCHARGE MACHINING AISI 304 SS WITH MULTI HOLE ELECTRODE |
Maan Aabid Tawfiq, Saad Hameed Najem, |
Volume 5,Issue 7,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 56 |
Ni ION RELEASE OF TiO2 AND TiO2 / HYDROXYLAPATITE COMPOSITE COATINGS FORMED ON NiTi SHAPE MEMORY ALLOY PRODUCED BY POWDER METALLURGY |
Sami Abualnoun Ajeel, Abdul Raheem. K. Abid Ali, Murtadha Abdulmueen Alher, |
Volume 4,Issue 2,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 57 |
PARAMETRIC STUDY AND NUMERICAL MODELING OF CFRP CRUCIFORM SPECIMENS UNDER BIAXIAL LOADINGS |
Muhsin J. Jweeg, Skaker S. Hasan, Yassr Y. Kahtan, |
Volume 4,Issue 5,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 58 |
EXPERIMENTAL AND THEORETICAL STUDY OF THE INFLUENCE OF THE ADDITION OF ALUMINA POWDER TO 7020 ALUMINUM ALLOY FOAM ON THE MECHANICAL BEHAVIOR UNDER IMPACT LOADING |
ArkanJawdat Abassa, DhaferSadeq Al-Fatal, |
Volume 3,Issue 3,Year 2012 |
International Journal of Mechanical Engineering and Technology |
| 59 |
A MATHEMATICAL MODEL FOR PREDICTING AUTOCLAVE EXPANSION FOR PORTLAND CEMENT |
Tareq S. Al-Attar, |
Volume 4,Issue 1,Year 2013 |
International Journal of Civil Engineering and Technology |
| 60 |
EFFECT MANAGEMENT OF ELEVATED TEMPERATURE ON MECHANICAL AND MICROSTRUCTURE PROPERTIES OF REINFORCED CARBON FIBER LIGHTWEIGHT CONCRETE |
Alya’a Abbas AL-Attar, AmmarSaleem Khazaal, FirasKhairy Jaber, |
Volume 5,Issue 11,Year 2014 |
International Journal of Civil Engineering and Technology |
| 61 |
SEEPAGE ANALYSIS OF A ZONED EARTH DAM BY FINITE ELEMENTS |
Mohammed Y. Fattah, Salama N. Y. Al-Labban, Firas A. Salman, |
Volume 5,Issue 8,Year 2014 |
International Journal of Civil Engineering and Technology |
| 62 |
INVESTIGATION OF MATERIAL WASTE INCURRED IN THE CONSTRUCTION PROJECTS AT KARBALA PROVINCE IN IRAQ |
Zeyad S. M. Khaled, Basil S. Alshathr, Ali Hasan Hadi, |
Volume 5,Issue 10,Year 2014 |
International Journal of Civil Engineering and Technology |
| 63 |
MODELING FINAL COSTS OF IRAQI PUBLIC SCHOOL PROJECTS USING NEURAL NETWORKS |
Zeyad S. M. Khaled, Qais Jawad Frayyeh, Gafel kareem aswed, |
Volume 5,Issue 7,Year 2014 |
International Journal of Civil Engineering and Technology |
| 64 |
CONTRIBUTION TO LONG TERM PERFORMANCE OF PILED RAFT FOUNDATION IN CLAYEY SOIL |
Mohammed Y. Fattah, Mosa J. Al-Mosawi, Abbas A. O. Al-Zayadi, |
Volume 5,Issue 7,Year 2014 |
International Journal of Civil Engineering and Technology |
| 65 |
EVALUATION THE PERFORMANCE OF THE INFRASTRUCTURE PROJECT USING EARNED VALUE MANAGEMENT |
Ibrahim Abed Mohammed, Faiq Mohammed Sarhan, Duha Sameer, |
Volume 5,Issue 9,Year 2014 |
International Journal of Civil Engineering and Technology |
| 66 |
EFFECT OF FINE MATERIAL ON COMPACTION CHARACTERISTICS OF SUBBASE MATERIAL USING THE SUPERPAVE GYRATORY COMPACTOR |
Mohammed Y. Fattah, Miami M. Hilal, Huda B. Flyeh, |
Volume 7,Issue 5,Year 2016 |
International Journal of Civil Engineering and Technology |
| 67 |
IMPACT OF CAVITATION WITHIN THE HOMOGENOUS SOIL UNDER HYDRAULIC STRUCTURE ON FORMULATION OF THE SEEPAGE QUANTITY AND UPLIFT PRESSURE |
Dhurgham M.Abdulhasan, Jaafar S.Maatooq, |
Volume 10,Issue 1,Year 2019 |
International Journal of Civil Engineering and Technology |
| 68 |
INVESTIGATION OF SAMPLING ERROR ON SOIL TESTING RESULTS |
Mohammed Abdullateef Al-Neami, |
Volume 9,Issue 13,Year 2018 |
International Journal of Civil Engineering and Technology |
| 69 |
THE INFLUENCE OF CRUMB RUBBER MODIFIER (CRM) ON THE PROPERTIES OF ASPHALT CONCRETE MIXTURES |
Esraa T. Al-Azawee, Zaynab I. Qasim, |
Volume 9,Issue 10,Year 2018 |
International Journal of Civil Engineering and Technology |
| 70 |
PREDICTION THE MISSING PARTS OF SATELLITE IMAGE BY USING THE MODIFIED ARITHMETIC CODING METHOD |
Nagham Jaafar Shukur, |
Volume 9,Issue 13,Year 2018 |
International Journal of Civil Engineering and Technology |
| 71 |
HIGH VOLUME FLY ASH CONCRETE MODIFIED BY NANO SILICA PARTICLES AND EXPOSED TO SEWERAGE ENVIRONMENT |
Rusl Al Rammahi, Fadhil Rasin, Faris Al Ani, |
Volume 9,Issue 9,Year 2018 |
International Journal of Civil Engineering and Technology |
| 72 |
PARAMETRIC STUDY OF SHALLOW FOUNDATION BEARING CAPACITY IN CLAYEY SOIL |
Mohanned Q. Waheed, Noor M. Asmael, |
Volume 9,Issue 10,Year 2018 |
International Journal of Civil Engineering and Technology |
| 73 |
EFFECT OF BURNING TEMPERATURE OF CLAY BRICKS CONTAINING REEDS ON ITS LONGITUDINAL SHRINKAGE, MODULUS OF RAPTURE AND THERMAL CONDUCTIVITY |
Ghazwan Abdulsamad Salman, Shakir Ahmed Salih, |
Volume 9,Issue 9,Year 2018 |
International Journal of Civil Engineering and Technology |
| 74 |
EXPERIMENTAL STUDY ON BEARING CAPACITY OF SKIRTED FOUNDATIONS ON DRY GYPSEOUS SOIL |
Mahmood R. Mahmood, Mohammed Y. Fattah, Ahmed Khalaf, |
Volume 9,Issue 10,Year 2018 |
International Journal of Civil Engineering and Technology |
| 75 |
PROPOSAL TO ENHANCE FINGERPRINT RECOGNITION SYSTEM |
Soukaena H. Hashem, Abeer T. Maolod, Anmar A. Mohammad, |
Volume 4,Issue 3,Year 2013 |
International Journal of Computer Engineering and Technology |
| 76 |
EXPERIMENTAL EVALUATION FOR THE EFFECT OF BOND ON FLEXURAL RESISTANCE OF COMPOSITE STEELGEOPOLYMER CONCRETE BEAMS |
Bayrak S. Almuhsin, Tareq S. Al-Attar, Qais Hasan, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 77 |
INFORMATION HIDING IN EDGE LOCATION OF VIDEO USING AMALGAMATE FFT AND CUBIC SPLINE |
Hanaa M. A Salman, |
Volume 4,Issue 4,Year 2013 |
International Journal of Computer Engineering and Technology |
| 78 |
APPLYING DIFFERENT DECENTRALIZED LOADINGS ON RC CONTINUOUS DEEP BEAMS USING STM |
Ali Mustafa Jalil, Mohammed J. Hamood, Khattab Saleem Abdul-Razzaq, Abbas H. Mohammed, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 79 |
A SURVEY OF CLOUD BASED SECURED WEB APPLICATION |
Ahmed Hashim Mohammed, Hanaa M. A. Salman, Saad K Majeed, |
Volume 4,Issue 4,Year 2013 |
International Journal of Computer Engineering and Technology |
| 80 |
GEOMATICS TECHNIQUES FOR THE BEST FLOOD OUTLET SELECTION |
Amjed Naser Mohsin AL-Hameedawi, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 81 |
DESIGN AND PERFORMANCE INVESTIGATION OF TUNABLE UWB THZ ANTENNA BASED ON GRAPHENE FRACTAL ARTIFICIAL MAGNETIC CONDUCTOR |
Hussein A. Abdulnabi, Riffat T. Hussiein, Raad S. Fyath, |
Volume 6,Issue 9,Year 2015 |
International Journal of Electronics and Communication Engineering and Technology |
| 82 |
BEHAVIOR ANALYSIS OF ROUTING PROTOCOLS FOR A HEALTH DECISION SUPPORT SYSTEM |
Yuriy ALYEKSYEYENKOV, Mohammed Najm Abdullah, Eng.Mustafa Tareq Nafea, |
Volume 5,Issue 4,Year 2014 |
International Journal of Computer Engineering and Technology |
| 83 |
A WIDEBAND HYBRID PLASMONIC FRACTAL PATCH NANOANTENNA |
Riffat T. Hussiein, Dheif I.Abood, |
Volume 5,Issue 9,Year 2014 |
International Journal of Electronics and Communication Engineering and Technology |
| 84 |
THE EMERGENCE OF URBAN JOINTS IN CITIES |
Wahda Al-Hinkawi, Ahmed A. Alatta, |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 85 |
ATTACKING CLASSICAL CRYPTOGRAPHY METHOD USING PSO BASED ON VARIABLE NEIGHBORHOOD SEARCH |
Ahmed Tariq Sadiq, Amjed Abbas Ahmed, Sura Mazin Ali , |
Volume 5,Issue 3,Year 2014 |
International Journal of Computer Engineering and Technology |
| 86 |
A HARMONIC SECRET SHARING AND PERMUTATION BASED DOCUMENT IMAGE AUTHENTICATION |
Muna Ghazi, Hanaa M. A Salman, |
Volume 4,Issue 5,Year 2013 |
International Journal of Computer Engineering and Technology |
| 87 |
Online Preprocessing of Gesture Signs using Background Substructure and Edge Detection Algorithms |
Farah F. Alkhalid, |
Volume 21,Issue 2,Year 2020 |
International Journal of Simulation: Systems, Science and Technology |
| 88 |
THE IMPACT OF PLANNING POLICIES ON THE CITIES` MORPHOLOGICAL TRANSFORMATIONS CITY OF KIRKUK AS A CASE STUDY |
Shaymaa F. Alkubaissy, Wahda Al-Hinkawi, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
| 89 |
A NEW ADAPTIVE STEP SIZE MCMA BLIND EQUALIZER ALGORITHM BASED ON ABSOULATE ERROE AND ITERATION NUMBER |
Thamer M. Jamel, Mohammed Abed Shabeeb, |
Volume 4,Issue 2,Year 2013 |
International Journal of Electronics and Communication Engineering and Technology |
| 90 |
INVESTIGATION THE PROPERTIES OF SILICONE RUBBER BLEND REINFORCED BY NATURAL NANOPARTICLES AND UHMWPE FIBER |
Sihama I. Salih, Jawad Kadhim Oleiwi, Hajir Mohammed Ali, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 91 |
ANALYSIS OF BEHAVIOUR OF SOIL SURROUNDING AROUND BAGHDAD METRO AT BAGHDAD CITY CENTER DURING AND AFTER TUNNEL EXCAVATION USING THE FINITE ELEMENT METHOD |
Muammar H. Al-Taee, Aqeel Al-Adili, Nagaratnam Sivakugan, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 92 |
THREE DIMENSIONAL NUMERICAL INVESTIGATION OF BAGHDAD METRO PASSING UNDER TIGRIS |
Muammar H. Al-Taee, Aqeel Al-Adili, Nagaratnam Sivakugan, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 93 |
AN EXPERIMENTAL INVESTIGATION ON THE PULLOUT STRENGTH OF STRAIGHT STEEL BARS IN HIGH PERFORMANCE CONCRETE |
Nagham T. H. Al-Shafi`i, Huda T. H. Al-Shafi`i, Maha M. S. Ridha, Ban S. Abduljalel, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 94 |
PREDICTING MOVEMENT OF SOIL AROUND BAGHDAD METRO UNDER BUILDINGS LOADS USING THREE DIMENSIONAL NUMERICAL SIMULATION |
Muammar H. Al-Taee, Aqeel Al-Adili, Nagaratnam Sivakugan, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 95 |
BEHAVIOR OF REINFORCED CONCRETE BEAMS COMPOSED OF REACTIVE POWDER STRENGTHENED BY CFRP UNDER REPEATED LOAD |
Wameedh Gh. Abdul Hussein, Mohammed A. E. Al-Hamdani, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
| 96 |
EXPERIMENTAL INVESTIGATION OF STRUCTURAL BEHAVIOR OF COMPOSITE STEEL CONCRETE BEAMS SUBJECTED TO IMPACT LOADS |
Sh. Q. Abdulridha , H. H. Muteb , S. Sh. Abdulqader , |
Volume 9,Issue 7,Year 2018 |
International Journal of Civil Engineering and Technology |
| 97 |
EXPERIMENTAL INVESTIGATION TENSILE PROPERTIES OF ROD METAL AA5182 UNDER WIDE RANGE OF STRAIN RATES |
Asaad Khudhair Hamzah, Haitham M. Ibrahim Al-Zuhairi, Areej Sami Mahdi, Alalkawi H. J , |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 98 |
THE EFFECT OF CF-555 SUPER PLASTICIZER ON MECHANICAL PROPERTIES OF ORDINARY CONCRETE |
Taghreed A Musa, Ayam Jabbar Jihad, Roaa Riyadh Rahman, Qusay Abdulhameed Jabal, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 99 |
A PROPOSAL INTELLIGENT ALGORITHM FOR ADAPTATION OF ANTNET ROUTING IN BEST EFFORT IP NETWORKS |
Muna Mohamed Jawad, Mahmood Zaki Abdullah, Ahmed Nahidh Hamzah, |
Volume 5,Issue 6,Year 2014 |
International Journal of Computer Engineering and Technology |
| 100 |
EFFECT OF LOAD FREQUENCY ON THE SUBGRADE LAYER STRESSES BENEATH RAILWAYS |
Qutaiba G Majeed, Mohammed Y. Fattah, Hassan H. Joni, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 101 |
Comparison and Evaluation of Cloud Processing Models in Cloud-Based Networks |
Ghaida Muttashar Abdulsahib, Osamah Ibrahim Khalaf, |
Volume 19,Issue 5,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
| 102 |
Improvement the Performance of Drum Boiler in Thermal Power Plant using Hybrid Model through the Adaptive Neuro-Fuzzy Controller |
Khalid Faisal Sultan, Hosham Salim Anead, Malak Moneeryounis, |
Volume 11,Issue 22,Year 2018 |
Indian Journal of Science and Technology |
| 103 |
INVESTIGATION OF PAPR REDUCTION TECHNIQUE USING TRC-SLM INTEGRATION |
Yaqeen Sabah Mezaal, Hussein A Hussein, Fakhir A. A. Alfatlawy, Zahraa J Abdulkareem, Lujain N Yousif, |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
| 104 |
A Reliable Algorithm for Multi-Dimensional Mobile/ Immobile Advection-Dispersion Equation with Variable Order Fractional |
Iman I. Gorial, |
Volume 11,Issue 30,Year 2018 |
Indian Journal of Science and Technology |
| 105 |
Comparative between Neuro-fuzzy and PI Controller Temperature of Condenser in Thermal Power Plant (160 MW) |
Hosham Salim Anead, Khalid Faisal Sultan, Malak Moneeryounis, |
Volume 11,Issue 29,Year 2018 |
Indian Journal of Science and Technology |
| 106 |
IoT Protocols for Health Care Systems: A Comparative Study |
H.M. Hasan , |
Volume 7,Issue 11,Year 2018 |
International Journal of Computer Science and Mobile Computing |
| 107 |
Evaluation of MQTT Protocol for E-Learning |
H.M. Hasan , Hawra`a Fadhil Abbas, |
Volume 7,Issue 11,Year 2018 |
International Journal of Computer Science and Mobile Computing |
| 108 |
A Survey on the Tracking of Object in Sequence Image |
Ali Fadhil Yaseen, |
Volume 7,Issue 11,Year 2018 |
International Journal of Computer Science and Mobile Computing |
| 109 |
A Survey on the Layers of Convolutional Neural Networks |
Ali Fadhil Yaseen, |
Volume 7,Issue 12,Year 2018 |
International Journal of Computer Science and Mobile Computing |
| 110 |
Machine Learning-Based Detection of Credit Card Fraud: A Comparative Study |
Zainab Khamees Alkhateeb, Abeer Tariq Maolood, |
Volume 12,Issue 4,Year 2019 |
American Journal of Engineering and Applied Sciences |
| 111 |
Development cutting plane method to find optimal integer solution for Fuzzy linear programming problems |
Isra`a H. Hassan, Rasha J. Mitilf, Waleed Khalid Jaber, |
Volume 7,Issue 3,Year 2019 |
New Trends in Mathematical Sciences |
| 112 |
FLEXURAL AND FLEXURAL TOUGHNESS OF FIBER REINFORCED CONCRETE- AMERICAN STANDARD SPECIFICATIONS REVIEW |
Ali Jihad Hamad, Rami Joseph Aghajan Sldozian, |
Volume 4,Issue 3,Year 2019 |
Global Research and Development Journal for Engineering |
| 113 |
INFLUENCE OF DIFFERENT CURING WAYS ON THE PROPERTIES OF CONCRETE |
Rami Joseph Aghajan Sldozian, Ali Jihad Hamad, |
Volume 4,Issue 10,Year 2019 |
Global Research and Development Journal for Engineering |
| 114 |
The effect of Li2SiO3 Nano-fillers addition on some mechanical properties of heat cured polymethyl methacrylate denture base material |
Balkees M Diya, Intisar J Ismail, Farrah J Ebrahim, |
Volume 6,Issue 8,Year 2018 |
Merit Research Journal of Medicine and Medical Sciences |
| 115 |
BUILDING AN AHP DECISION MODEL TO ASSESS THE IMPORTANCE OF DESIGN CRITERIA FOR SCHOOL BUILDINGS PROJECTS in Iraq |
Afrah Mohammed Hassan, Majid Hameed Yahy, |
Volume 5,Issue 3,Year 2018 |
Global Journal of Engineering Science and Researches |
| 116 |
The Assessment of Using CFRP to Enhance the Behavior of High Strength Reinforced Concrete Corbels |
Mazin B Abdulrahman, Shakir A Salih, Rusul J Abduljabbar, |
Volume 28,Issue 1,Year 2021 |
Tikrit Journal of Engineering Sciences |
| 117 |
Object-Based Method for Urban Extraction through Using Quick Bird Satellite Imagery, LiDAR Data and Digital Urban Geomatics Techniques |
Noor Hashim Hamed, |
Volume 28,Issue 2,Year 2021 |
Tikrit Journal of Engineering Sciences |
| 118 |
Performance Measures and Level of Transit Service Assessment of Public Transport Bus Network in Baghdad City during 2002-2003 |
Tan Yiqiu , Lihui Qin , Imad Ismael, Ali Fadhil Naser, |
Volume 28,Issue 3,Year 2021 |
Tikrit Journal of Engineering Sciences |
| 119 |
Response of Different Machine Foundation Shapes Resting on Dry Sand to Dynamic Loading |
Khalid W Abdul Kaream, Mohammed Y Fattah, Zeyad S M Khaled, |
Volume 27,Issue 2,Year 2020 |
Tikrit Journal of Engineering Sciences |
| 120 |
A Miniaturized Compact Wideband Partial Ground Antenna Used in RFID Systems |
Sufyan Hazaa Ali, Ahmed H R Alfalahi, Yousif Azzawi Hachim, |
Volume 27,Issue 2,Year 2020 |
Tikrit Journal of Engineering Sciences |
| 121 |
Influence of the Yttria and Graphite Particles on the same of Al 2024 Alloy Properties |
Raed N Razooqi, Ahmed A Akbar, Mohanad L Hamada, |
Volume 26,Issue 4,Year 2019 |
Tikrit Journal of Engineering Sciences |
| 122 |
Performance Enhancement of a Darrieus Vertical Axis Wind Turbine using Divergent Ducting System |
Abdullateef A Jadallah, Sahar R Farag, Jinan D Hamdi, |
Volume 25,Issue 3,Year 2018 |
Tikrit Journal of Engineering Sciences |
| 123 |
Effect of Colored Filters on PV Panels Temperature and Performance under Baghdad Meteorological Condition |
Abdulmunem R.Abdulmunem, Abdullateef A Jadallah, Hisham Assi Hoshi, Mohammed Hassan Jabal, |
Volume 25,Issue 4,Year 2018 |
Tikrit Journal of Engineering Sciences |
| 124 |
DETECTION OF THE ANTIBACTERIAL ACTIVITY OF AGNPS BIOSYNTHESIZED BY PSEUDOMONAS AERUGINOSA |
N. N. Hussein , A. H. Muslim , |
Volume 50,Issue 2,Year 2019 |
Iraqi Journal of Agricultural Sciences |
| 125 |
STUDY OF TOXIC HEAVY METAL REMOVAL BY DIFFERENT CHITOSAN/HYACINTHS PLANT COMPOSITE |
F. H. Rashid , A. A .Taha , N.J.Hameed , |
Volume 50,Issue 5,Year 2019 |
Iraqi Journal of Agricultural Sciences |
| 126 |
DETECTION OF THE ANTIMICROBIAL ACTIVITY OF SILVER NANOPARTICULES BIOSYNTHESIZED BY STREPTOCOCCUS PYOGENES BACTERIA |
M. M. Kadhum , N. N. Hussein , |
Volume 51,Issue 2,Year 2020 |
Iraqi Journal of Agricultural Sciences |
| 127 |
MULTIVARIATE ANALYSIS FOR EVALUATION THE WATER QUALITY OF TIGRIS RIVER WITHIN BAGHDAD CITY IN IRAQ |
R. R. Al-Ani , A. M. J. Al Obaidy , F. M. Hassan , |
Volume 50,Issue 1,Year 2019 |
Iraqi Journal of Agricultural Sciences |
| 128 |
DETECTION OF POLYCYCLIC AROMATIC HYDROCARBONS COMPOUNDS CONCENTRATIONS AND THEIR FATE IN TIGRIS RIVER WITHIN BAGHDAD CITY - IRAQ |
S. M. Khalaf , F. M. Hassan , A. H. J. Al-Obaidy , |
Volume 50,Issue Special Issue,Year 2019 |
Iraqi Journal of Agricultural Sciences |
| 129 |
Study an Effect of Thiourea Concentration on the Structural, Optical and Electrical Properties of (Cu2S) film Prepared by Chemical Bath Deposition (CBD) |
Ali M. Muhammed, Abdul-Majeed E. Ibrahim, Raid A. Ismail, |
Volume 14,Issue 3,Year 2019 |
Kirkuk University Journal-Scientific Studies |
| 130 |
Study the Effect Thiourea Concentration to (Cu2S/Si) Heterojunction Photodetector by Chemical Bath Deposition (CBD) |
Ali M. Muhammed, Abdul-Majeed E. Ibrahim, Raid A. Ismail, |
Volume 14,Issue 3,Year 2019 |
Kirkuk University Journal-Scientific Studies |
| 131 |
An experimental investigation of Impact of ZrO2 nanoparticles in DI engine performance |
Adel Sharif Hamadi, Hayder Abed Dhahad, Ali Ghufran Khidhir, |
Volume 14,Issue 1,Year 2019 |
Kirkuk University Journal-Scientific Studies |
| 132 |
The recent advances in the nanotechnology and its applications in food processing: A review |
K.A. Abbas , A.M. Saleh , A. Mohamed , N. MohdAzhan , |
Volume 7,Issue 3&4,Year 2009 |
Journal of Food, Agriculture and Environment |
| 133 |
Significance and application of psychrometric chart in food processing: A review |
K. A. Abbas , Adel M. Saleh, Ola Lasekan, Hussein A. Abbas, |
Volume 8,Issue 3&4,Year 2010 |
Journal of Food, Agriculture and Environment |
| 134 |
Cloud-based Home Appliances Automation System |
Zainab Malik Jasim, Ayman Dawood Salman, |
Volume 7,Issue ,Year 2021 |
International Journal Of Innovations In Applied Sciences And Engineering |
| 135 |
Hiding Secret image in image based Discrete Wavelet Transform |
Doaa Mahmood Abass, A Alice Blessie, |
Volume 7,Issue ,Year 2021 |
International Journal Of Innovations In Applied Sciences And Engineering |
| 136 |
EFFECT OF ORGANIZATIONAL EFFECTIVENESS ON ORGANIZATIONAL STRUCTURE |
Mohamed Imad Raoof, |
Volume 9,Issue 4,Year 2019 |
International Journal Of Research In Social Sciences And Humanities |
| 137 |
HA/HDPE Reinforced with MWCNTs for Bone Reconstruction and Replacement Application |
Ali A. Al-Allaq, Jenan S. Kashan, Mohamed T. El-Wakad, Ahmed M. Soliman, |
Volume 59,Issue 1,Year 2022 |
Materiale Plastice |
| 138 |
SYNTHESIS AND CHARACTERIZATION OF NEW CHALCONE COMPOUNDS DERIVED FROM QUINOLINE |
Hiba H Ibraheem, Sarah Abdulhamza Hameed, |
Volume 6,Issue 1,Year 2020 |
World Journal of Pharmaceutical and Life Sciences |
| 139 |
SYNTHESIS OF SOME COUMARIN-ETHYLIDENEAMINO-2-THIOXOIMIDAZOLIN-4- ONE DERIVATIVES |
Ali Mahdi, Yasameen K Al-Majedy, |
Volume 6,Issue 2,Year 2020 |
World Journal of Pharmaceutical and Life Sciences |
| 140 |
Optimization of Machining Parameters of AISI 1045 Steel for Better Surface Finish and Tool Life Using TiN Coated Carbide Insert |
Lujain H Kashkool, |
Volume 29,Issue 2,Year 2022 |
Tikrit Journal of Engineering Sciences |
| 141 |
The optimum conditions of Titanium Recovery process from the Iraqi Bauxite Ore |
Waleed T Rashid, Baqer A Ahmad, Ajheen H Jumaah, |
Volume 29,Issue 2,Year 2022 |
Tikrit Journal of Engineering Sciences |
| 142 |
DETERMINATION OF ACTIVE INGREDIENT IN TAMSULOSIN DRUG BY USING HPLC |
W T. H. Al-Shammari , A. J. M.Al- Ogaidi , |
Volume 53,Issue 3,Year 2022 |
Iraqi Journal of Agricultural Sciences |
| 143 |
Sentiment Analysis using Optimised Feature Sets in Different Facebook/Twitter Dataset Domains with Big Data |
Mohammed Ibrahim Al-mashhadani, Kilan M Hussein, Enas Tariq Khudir, Muhammad Ilyas, |
Volume 3,Issue 1,Year 2022 |
Iraqi Journal for Computer Science and Mathematics |
| 144 |
Proposed method for scale drawing calculating depending on the line detector and length detector |
Huda Dheyauldeen Najeeb, Rana Fareed Ghani, |
Volume 2,Issue 2,Year 2021 |
Iraqi Journal for Computer Science and Mathematics |
