| 1 |
IMPLEMENTATION OF FASTER REGION-CNN FOR IMAGE CLASSIFICATION USING MATLAB |
K. Gayathri Nagasai Mounika, K. Sasi Swetha Sruthi, M. Santosh , G. Srinu , S. Rama Krishna, |
Volume 11,Issue 1,Year 2020 |
International Journal of Electronics and Communication Engineering and Technology |
| 2 |
SLOPE STABILITY ANALYSIS OF BASAL REINFORCED EMBANKMENT UNDER OBLIQUE PULL |
V.K. Chakravarth , K. Ramu , M.R. Madhav , |
Volume 1,Issue 1,Year 2010 |
International Journal of Civil Engineering and Technology |
| 3 |
RICE HUSK ASH STABILIZED COMPRESSED EARTH BLOCK-A SUSTAINABLE CONSTRUCTION BUILDING MATERIAL - A REVIEW |
RAJU SATHISH KUMAR, JANARDHANA MAGANTI, DARGA KUMAR NANDYALA, |
Volume 3,Issue 1,Year 2012 |
International Journal of Civil Engineering and Technology |
| 4 |
COMPARATIVE ANALYSIS OF CLASSIFICATION APPROACHES FOR BREAST CANCER |
Temesgen Abera Asfaw, |
Volume 10,Issue 4,Year 2019 |
International Journal of Computer Engineering and Technology |
| 5 |
PREDICTION OF DIABETES MELLITUS USING MACHINE LEARNING TECHNIQUES |
Temesgen Abera Asfaw, |
Volume 10,Issue 4,Year 2019 |
International Journal of Computer Engineering and Technology |
| 6 |
INVENTORY HOLDING PERIOD ANALYSIS OF SAP IMPLEMENTED COMPANIES |
Kuruganty Seetha Ram Babu, A.V. Satyanarayana , A. Prabhu Kumar, |
Volume 10,Issue 5,Year 2019 |
International Journal of Computer Engineering and Technology |
| 7 |
RELIABILITY MEASUREMENT OF MEMORY SYSTEM USING SPARE BLOCKS |
V.R. Seshagiri Rao, Asha Rani.M, |
Volume 9,Issue 1,Year 2018 |
International Journal of Electrical Engineering and Technology |
| 8 |
TO IMPROVE EFFICIENCY OF PROTOTYPE VAWT TEST SETUP USING VFD |
B. Justus Rabi, K. Manikandan , |
Volume 9,Issue 2,Year 2018 |
International Journal of Electrical Engineering and Technology |
| 9 |
PERFORMANCE STUDY OF TRANSFORMERS UNDER NON-LINEAR LOAD CONDITIONS WITHOUT AND WITH ACTIVE FILTER |
J. Mahesh Yadav, A. Srinivasula Reddy, |
Volume 9,Issue 2,Year 2018 |
International Journal of Electrical Engineering and Technology |
| 10 |
MLI TECHNIQUE FOR PLACEMENT AND SIZING OF DG FOR MINIMUM LINE LOSSES |
G Sasi Kumar, S Sarat Kumar, S V Jayaram Kumar, |
Volume 11,Issue 4,Year 2020 |
International Journal of Electrical Engineering and Technology |
| 11 |
SPACE VECTOR PWM BASED VECTOR CONTROLLED INDUCTION MOTOR DRIVES WITH REDUCED COMMON MODE VOLTAGE |
Syed Munvar Ali, V. Vijayakumar Reddy, M. Surya Kalavathi, |
Volume 9,Issue 3,Year 2018 |
International Journal of Electrical Engineering and Technology |
| 12 |
AN APPROACH TO DISTINGUISH THE CONDITIONS OF FLASH CROWD VERSUS DDOS ATTACKS AND TO REMEDY A CYBER CRIME |
N. Srihari Rao, K. Chandra Sekharaiah, A. Ananda Rao, |
Volume 9,Issue 2,Year 2018 |
International Journal of Computer Engineering and Technology |
| 13 |
IMPROVED LOAD MANAGEMENT ALGORITHM FOR EMU/ HEMS USING MACHINE LEARNING ALGORITHMS |
M. Prathapa Raju, A. Jaya Laxmi, |
Volume 9,Issue 5,Year 2018 |
International Journal of Electrical Engineering and Technology |
| 14 |
FAULT ANALYSIS FOR VOLTAGE SOURCE INVERTER DRIVEN INDUCTION MOTOR DRIVE |
M. Dilip Kumar, S. F. Kodad , B. Sarvesh , |
Volume 8,Issue 1,Year 2017 |
International Journal of Electrical Engineering and Technology |
| 15 |
V-BIBE: A NEW IDENTITY BASED ENCRYPTION SCHEME |
Ch. Ramesh , K VenuGopalRao , D. Vasumathi , |
Volume 9,Issue 4,Year 2018 |
International Journal of Computer Engineering and Technology |
| 16 |
A SURVEY ON IOT TECHNOLOGY |
Syeda Gauhar Fatima, Syeda Kausar Fatima, K. Anitha Sheela, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 17 |
SOFTWARE DEFECT PREDICTION: PAST PRESENT AND FUTURE |
G N V Ramana Rao, VVSSS Balaram , B. Vishnuvardhan , |
Volume 9,Issue 5,Year 2018 |
International Journal of Computer Engineering and Technology |
| 18 |
THE EFFECT OF CUSTOMER RELATIONSHIP MANAGEMENT ON CUSTOMER SATISFACTION: EMPIRICAL EVIDENCE FROM STAR RATED HOTELS IN AMHARA REGION, ETHIOPIA |
Simachew Zeleke, A. Prabhu Kumar, |
Volume 11,Issue 5,Year 2020 |
International Journal of Management |
| 19 |
COST SENSITIVE SOFTWARE DEFECT PREDICTION TECHNIQUE USING GENETIC ALGORITHM |
G N V Ramana Rao, VVSSS Balaram , B. Vishnuvardhan , |
Volume 9,Issue 6,Year 2018 |
International Journal of Computer Engineering and Technology |
| 20 |
MECHANICAL PROPERTIES AND MORPHOLOGY OF POLY (LACTIC ACID) (PLA) WITH DIFFERENT FLEXIBLE COPOLYMERS |
N. Venkatachalapathi , G.Prasanthi , B Ramanjaneyulu , |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 21 |
OPTIMIZATION COMPARISON OF ROUNDNESS ERROR IN WIRE- EDM MACHINING BY VARIABLE METHODS |
S. Ajaya Kumar, A. Prabhu Kumar, B. Balu Naik, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 22 |
A MONITORING SCHEME WITH IOT AND SENSOR EXPERTISE |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, Anita Sheela, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 23 |
DESIGN AND MODELLING OF DIESEL PARTICULATE FILTER TO REDUCE THE EMISSIONS FROM CI ENGINE |
SK.Khasim Sharif, Jana Nagarjun, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 24 |
WORK-LIFE BALANCE OF WORKING WOMEN PROFESSIONALS-A STUDY OF WOMEN IN DIFFERENT SECTORS IN WARANGAL REGION |
M. Rajya Laxmi, M. Sudhir Reddy, M. Satyavathi , |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
| 25 |
A NOVEL APPROACH FOR PREDICTION OF FUTURE ENVIRONMENTAL IMPACTS OF URBAN GROWTH |
Kusuma Sundara Kumar, Pinnamaneni Udaya Bhaskar, Kollipara Padma Kumari, |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
| 26 |
OPERATION OF A UPSTREAM RESERVOIR USING RULE CURVE TO IMPROVE THE PERFORMANCE OF THE DOWNSTREAM RESERVOIRS |
M. Visweswararao , G.K. Viswanadh , |
Volume 10,Issue 7,Year 2019 |
International Journal of Civil Engineering and Technology |
| 27 |
RADIATION EFFECT ON NATURAL CONVECTIVE MHD FLOW THROUGH A POROUS MEDIUM WITH DOUBLE DIFFUSION IN THE PRESENCE OF CHEMICAL REACTION |
Pudhari Srilatha, M N Raja Shekar, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
| 28 |
PERFORMANCE ANALYSIS OF UPFC EMBEDDED WITH THREE LEVEL CASCADED H BRIDGE INVERTER WITH SPWM AND SVPWM TECHNIQUES AND ANFIS CONTROLLER |
T. JaganMohan Raju, G. Tulasi Ram Das, |
Volume 11,Issue 9,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 29 |
SEISMIC PERFORMANCE OF RC FRAMED BUILDINGS UNDER LINEAR DYNAMIC ANALYSIS |
Vaishali G. Ghorpade, H. Sudarsana Rao, Anusha Kudumula, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
| 30 |
THERMAL ANALYSIS OF MODIFIED COMBUSTION CHAMBER OF SPARK IGNITION ENGINE |
Nagini yarramsetty, M.V.S. Murali Krishna, S.Naga Sarada, |
Volume 10,Issue 5,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 31 |
IMPROVING PERFORMANCE OF THE DISTRIBUTED FILE SYSTEM USING SPECULATIVE READ ALGORITHM AND SUPPORT-BASED REPLACEMENT TECHNIQUE |
Rathnamma Gopisetty, Thirumalaisamy Ragunathan, C Shoba Bindu, |
Volume 11,Issue 9,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 32 |
DETERMINATION OF NET FLOWS INTO ALMATTI RESERVOIR FROM CWC GAUGE DATA AND RESERVOIR DATA |
M. Visweswararao , G. K. Viswandh , |
Volume 8,Issue 2,Year 2017 |
International Journal of Civil Engineering and Technology |
| 33 |
FLEXURAL FATIGUE ANALYSIS OF FIBER REINFORCED COMPOSITE LAMINATES |
H. Saidulu , M. Manzoor Hussain, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 34 |
A STUDY ON EFFECT OF MOISTER ABSORPTION ON TENSILE BEHAVIOUR OF GLASS/EPOXY COMPOSITES |
H. Saidulu , M. Manzoor Hussain, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 35 |
VIRTUAL MACHINE CONSOLIDATION USING MODIFIED LION OPTIMIZATION ALGORITHM TO IMPROVE ENERGY EFFICIENCY IN CLOUD COMPUTING ENVIRONMENT |
Kethavath Prem Kumar, Thirumalaisamy Ragunathan, Devara Vasumathi, |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 36 |
WEIGHTED FUSION APPROACH FOR MULTI MODAL BIOMETRIC RECOGNITION SYSTEM USING DEEP NETWORKS |
S. Sujana , VSK Reddy , |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 37 |
OPTIMIZED ATTRIBUTE BASED ENCRYPTION APPROACH OVER BIG DATA ANALYTICS FOR PRIVACY PRESERVATION IN DATA MINING |
Ajmeera Kiran, D. Vasumathi , |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 38 |
SCENE TEXT RECOGNITION OF INDIAN LANGUAGES IN NATURAL SCENE IMAGES |
A. Vishnuvardhan , Dhanalakshmi Miryala, |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 39 |
IMPROVING QOS USING OVERLAPPING CLUSTERS IN WIRELESS SENSOR NETWORK |
Devendra Rao B V., Satyanarayana V. Nandury, D. Vasumathi , |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 40 |
A QUALITY MODEL FOR EVALUATION AND SELECTION OF SOFTWARE SERVICES IN CLOUD |
Dhanamma Jagli, Seema Purohit, Subhash Chandra, |
Volume 11,Issue 11,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 41 |
KERNEL PCA BASED DIMENSIONALITY REDUCTION TECHNIQUES FOR PREPROCESSING OF TELUGU TEXT DOCUMENTS FOR CLUSTER ANALYSIS |
Srinivas Mekala, B. Padmaja Rani, |
Volume 11,Issue 11,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 42 |
FLEXURAL BEHAVIOUR OF STEEL FIBER REINFORCED SLABS MADE WITH COPPER SLAG AS FINE AGGREGATE |
DAS Mohd Areef, P Srinivasa Rao, V Srinivasa Reddy, D Mohd Azeem Zubair, |
Volume 11,Issue 11,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 43 |
CRACK HEALING EFFICIENCY OF BACTERIA INDUCED CONCRETE |
V Srinivasa Reddy, Ch Sasikala , S Shrihari , |
Volume 11,Issue 11,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 44 |
STUDIES ON IMPACT OF MINING ON SURFACE AND GROUNDWATER |
G. Sreenivasa Rao, A. Manjunath , MVSS Giridhar , |
Volume 5,Issue 1,Year 2019 |
International Journal of Architecture |
| 45 |
FRACTIONAL ORDER ANN CONTROLLER FOR LFC OF EVS INTEGRATED DEREGULATED POWER SYSTEM |
Saraswathi Sriramula, B Ravindranath Reddy, M Surya Kalavathi, |
Volume 11,Issue 10,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 46 |
TEXT SUMMARIZATION FOR INDIAN LANGUAGES: A SURVEY |
Kishore Kumar Mamidala, Suresh Kumar Sanampudi, |
Volume 12,Issue 1,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 47 |
PASSIVE MONITORING OF USER UPDATION FOR RELIABLE INTRUSION DETECTION SYSTEM |
Rafath Samrin, D Vasumathi , |
Volume 12,Issue 1,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 48 |
SECURITY AWARE ROUTING FOR WIRELESS SENSOR NETWORK USING HYBRID OPTIMIZATION ALGORITHM |
Syed Mohd.Ali, Syed Abdul Sattar, D. Srinivasa Rao, |
Volume 11,Issue 3,Year 2020 |
International Journal of Electronics and Communication Engineering and Technology |
| 49 |
EXPERIMENTAL INVESTIGATION OF PERFORMANCE AND EMISSION PARAMETERS OF A CI ENGINE FUELED WITH HYDNOCARPUS LAURIFOLIA BIODIESEL BLENDS |
M Suresh , D Maheswar , |
Volume 9,Issue 13,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 50 |
A STUDY ON FINANCIAL INCLUSION AND THE ROLE OF BUSINESS CORRESPONDENTS WITH SPECIAL REFERENCE TO MAREDIMILLI MANDAL IN EAST GODAVARI DISTRICT |
Irrinki Mohana Krishna, B Kuberudu , |
Volume 7,Issue 1,Year 2016 |
International Journal of Management |
| 51 |
BIOMETRIC BASED ATTENDANCE REGISTRATION AND CONSOLIDATION SYSTEM USING RASPBERRY PI3 AND AMAZON WEB SERVER |
Dhiraj Sunehra, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 52 |
RASPBERRY PI BASED POLLUTION AND CLIMATE MONITORING SYSTEM USING INTERNET OF THINGS |
Dhiraj Sunehra, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 53 |
WEB BASED SMART IRRIGATION SYSTEM USING RASPBERRY PI |
Dhiraj Sunehra, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 54 |
HOME AUTOMATION SYSTEM WITH WSN AND IOT |
Syeda Gauhar Fatima, Syeda Kausar Fatima, Syed Mohd.Ali, Naseer Ahmed Khan, Syed Adil, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 55 |
ENHANCEMENT OF ELECTRICAL ENERGY EFFICIENCY BY ``INTERNET OF THINGS`` |
Syeda Gauhar Fatima, Syeda Kausar Fatima, k Anitha Sheela, Naseer Ahmed Khan, Syed Adil, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 56 |
ENERGY EFFICIENT ROUTING IN WIRELESS SENSOR NETWORKS BASED ON QOS |
Syed Mohd.Ali, Syeda Gauhar Fatima, Syeda Kausar Fatima, Syed Abdul Sattar, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 57 |
ENERGY EFFICIENT DIRECTION BASED ROUTING PROTOCOL FOR WSN |
Syed Mohd.Ali, Syeda Gauhar Fatima, Syeda Kausar Fatima, Syed Abdul Sattar, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 58 |
LOAD BALANCING AND ENERGY EFFICIENCY IN WSN BY CLUSTER JOINING METHOD |
Syeda Gauhar Fatima, Syeda Kausar Fatima, K Anitha Sheela, Syed Shaker Hussaini, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 59 |
A SECURITY PROTOCOL FOR WIRELESS SENSOR NETWORKS |
Syeda Gauhar Fatima, Syeda Kausar Fatima, Syed Mohd.Ali, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 60 |
METHODOLOGIES AND CHALLENGES OF WSN FOR IOT |
Syeda Gauhar Fatima, Syeda Kausar Fatima, Syed Mohd.Ali, Naseer Ahmed Khan, Syed Adil, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 61 |
PERFORMANCE ESTIMATION OF ADHOC ROUTING PROTOCOLS WITH NS2 SIMULATOR |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, Syed Mohd.Ali, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 62 |
MOBILE ADHOC NETWORKS SECURITY CHALLENGES: A SURVEY |
Syeda kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, Syed Mohd.Ali, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 63 |
A RELATIVE STUDY ON CELLULAR, WSN AND MANETS |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, Syed Mohd.Ali, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 64 |
AN ANALYSIS ON COOPERATIVE ATTACKS IN MANETS |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, D. Srinivasa Rao, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 65 |
AN IMPROVED ROUTING PROTOCOL SCHEME IN ADHOC NETWORKS |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, Syed Mohd.Ali, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 66 |
AN ADVANCED DATA SECURITY METHOD IN WSN |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, Anita Sheela, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 67 |
AN INDEPENDENT TRUST MODEL FOR MANET BASED ON FUZZY LOGIC RULES |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, D. Srinivasa Rao, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 68 |
A SECURITY SCHEME BASED ON TRUST ATTACK IN MANET |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, D. Srinivasa Rao, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 69 |
TRUST MODEL WITH DEFENSE SCHEME IN MANETS |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, Syed Mohd Ali, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 70 |
AN INTRUSION DETECTION AND AVOIDANCE MECHANISM TO SECURE MANETS |
Syeda Kausar Fatima, Syeda Gauhar Fatima, Syed Abdul Sattar, Anita Sheela, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 71 |
EXPERIMENTAL INVESTIGATIONS ON 4- STROKE SINGLE CYLINDER DIESEL ENGINE (C.I) WITH CHANGING GEOMETRY OF PISTON |
R Siva Kumar, K TirupathiReddy , K Hema Chandra reddy, |
Volume 9,Issue 13,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 72 |
BLUETOOTH BASED OFFICE AUTOMATION AND SECURITY SYSTEM USING RASPBERRY PI AND ANDROID APPLICATION |
Dhiraj Sunehra, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 73 |
SMART PHONE BASED ENERGY MANAGEMENT SYSTEM USING RASPBERRY PI3 |
Dhiraj Sunehra, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 74 |
SOLAR ENERGY DRIVEN MOSQUITO REPELLER SYSTEM USING ARDUINO UNO |
Dhiraj Sunehra, |
Volume 10,Issue 2,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 75 |
OPTIMIZATION OF MILLING PARAMETERS OF PLANETARY BALL MILL FOR SYNTHESIZING NANO PARTICLES |
Subrahmanyam Vasamsetti, Lingaraju Dumpala, V.V. Subbarao , |
Volume 9,Issue 11,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 76 |
INTEGRATING TRANSITION AND GRAPH BASED DEPENDENCY PARSERS USING ENSEMBLED AND STACKING APPROACHES FOR PARSING TELUGU LANGUAGE |
G. Nagaraju , N. Mangathayaru , B. Padmaja Rani, |
Volume 12,Issue 2,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 77 |
DESIGN AND IMPLEMENTATION OF MULTI LABEL LAND COVER CHANGE PREDICTION MODEL BY MODIFIED ANN-CNN AND CA-MARKOV METHOD |
Malige Gangappa, C. Kiran Mai, P. Sammulal , |
Volume 12,Issue 2,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 78 |
MICROSTRUCTURE STUDY AND RESIDUAL STRESS ANALYSIS OF MARAGING STEEL LASER WELDMENTS |
C Govindarajulu , A Gopala Krishna, |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 79 |
IMAGE PROCESSING METHODOLOGIES FOR DISEASE DETECTION AND RECOGNITION OF MANGO CROP: A SURVEY |
Shivayogi B. Ullagaddi, Vishwanadha Raju, |
Volume 5,Issue 1,Year 2014 |
International Journal of Graphics and Multimedia |
| 80 |
TENSILE DEFORMATION CHARACTERISTICS OF TI-6AL-4V (ELI GRADE) AND EFFECT OF INTERSTITIAL CONTENT |
N. Ranganayakulu , A.V.S.S.K.S.Gupta , N. Eswara Prasad, |
Volume 7,Issue 1,Year 2016 |
International Journal of Design and Manufacturing Technology |
| 81 |
EXPERIMENTAL INVESTIGATION OF A PORTAL FRAME USING MAGNETORHEOLOGICAL FLUID DAMPER |
G. Sailaja , N. Seetharamaiah , Maganti Janardhana, |
Volume 10,Issue 1,Year 2019 |
International Journal of Production Technology and Management |
| 82 |
NEARLY ISOTROPIC 6-UPU PARALLEL MANIPULATOR |
A. Chandrashekhar , G. Satish Babu, |
Volume 6,Issue 2,Year 2015 |
International Journal of Design and Manufacturing Technology |
| 83 |
MULTIUSER DETECTION USING NEURAL NETWORK FOR FD-MC-CDMA SYSTEM IN FREQUENCY SELECTIVE FADING CHANNELS |
Guntu Nooka Raj, B.Prabhakara Rao, |
Volume 9,Issue 6,Year 2018 |
International Journal of Electronics and Communication Engineering and Technology |
| 84 |
OPTIMUM DESIGN OF 4-UPU PARALLEL ROBOT USING CONDITION NUMBER |
A. Chandrashekhar , G. Satish Babu, |
Volume 6,Issue 2,Year 2015 |
International Journal of Industrial Engineering Research and Development |
| 85 |
PERFORMANCE OF METAHEURISTIC METHODS FOR LOOP LAYOUT DESIGN IN FLEXIBLE MANUFACTURING SYSTEM WITH INTEGRATED SCHEDULING |
K.Mallikarjuna , V.Veeranna , K.Hemachandra Reddy, |
Volume 4,Issue 1,Year 2013 |
International Journal of Production Technology and Management |
| 86 |
COLLECTION DEVELOPMENT IN AUTONOMOUS ENGINEERING COLLEGE LIBRARIES AFFILIATED TO JNTUK KAKINADA: A STUDY |
A.Ravikumar , B. R. Doraswamy Naick, |
Volume 4,Issue 3,Year 2015 |
International Journal of Library and Information Science |
| 87 |
A RELATIVE COMPARISON OF FINANCIAL PERFORMANCE OF STATE BANK OF INDIA AND AXIS BANK |
Premchand Kaila, E. Lokanadha Reddy, T. Narayana Reddy, |
Volume 6,Issue 1,Year 2019 |
Journal of Management |
| 88 |
EXPERIMENTAL INVESTIGATIONS ON WIRE VIBRATION, SPARK GAP, MRR AND SURFACE ROUGHNESS IN WEDM FOR HC-HCR STEEL |
Sivanaga MalleswaraRao Singu, K. Hema Chandra Reddy, K. Venkatarao , Ch.V.S. Parameswara Rao , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 89 |
EFFECT OF KARANJA OIL AS AN IC ENGINE FUEL IN COMBINATION WITH DIESEL IN CI ENGINE: AN EXPERIMENTAL INVESTIGATION |
P. Vijaya Rao, B. Sudheer Premkumar, K. Vijaya Kumar Reddy, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 90 |
EFFECT OF RISK MANAGEMENT ON BANKS` FINANCIAL PERFORMANCE: EVIDENCES FROM ETHIOPIAN COMMERCIAL BANKS |
Lemaa Belay Zeleke, Sindhu , |
Volume 12,Issue 3,Year 2021 |
International Journal of Management |
| 91 |
EFFECT OF DESIGN PARAMETERS ON THE PERFORMANCE OF A CLOSED LOOP PULSATING HEAT PIPE |
CH. Sreenivasa Rao, AVSSKS Gupta , K. Rama Narasimha, |
Volume 4,Issue 3,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 92 |
STUDY OF ROLLER BURNISHING PROCESS ON ALUMINUM WORK PIECES USING DESIGN OF EXPERIMENTS |
J.N. Malleswara Rao, A. Chenna Kesava Reddy, P. V. Rama Rao, |
Volume 2,Issue 1,Year 2011 |
International Journal of Mechanical Engineering and Technology |
| 93 |
TRUST ENHANCED DYNAMIC ROUTING FOR MANET |
Syeda Kausar Fatima, Syed Abdul Sattar, D. Srinivasa Rao, Syeda Gauhar Fatima, |
Volume 8,Issue 3,Year 2017 |
International Journal of Advanced Research in Engineering and Technology |
| 94 |
OPTIMAL QUERY RECOMMENDATION IN SPATIAL DATA WAREHOUSE USING DEMOCRATIC GREY WOLF OPTIMIZATION |
Sudhakar J , Subhash Chandra N, Venkata Ramana Reddy Busireddy, |
Volume 12,Issue 3,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 95 |
FPGA VERIFICATION OF MODIFIED REPETITIVE CONTROLLER FOR A POWER QUALITY CONDITIONER |
Rashmi Kapoor, M. Sushama , |
Volume 6,Issue 8,Year 2015 |
International Journal of Electrical Engineering and Technology |
| 96 |
EXPERIMENTAL STUDY OF CONVECTIVE HEAT TRANSFER IN A FINNED TUBE COUNTER FLOW HEAT EXCHANGER WITH Fe3O4-WATER NANOFLUID |
Mohammad. Sikindar Baba, M. Bhagvanth Rao, A. V. Sita Rama Raju, |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 97 |
LANDUSE/LANDCOVER AND NDVI ANALYSIS FOR HALIA CATCHMENT |
C.Sarala , |
Volume 4,Issue 5,Year 2013 |
International Journal of Information Technology and Management Information Systems |
| 98 |
MODIFIED RTS/CTS EXCHANGE MECHANISM FOR MANET WITH A MULTI LEVEL COLLISION DOMAIN ARCHITECTURE |
M Abdul Gafur, Niraj Upadhayaya, Syed Abdul Sattar, |
Volume 4,Issue 4,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 99 |
REDUCTION OF OXIDES OF NITROGEN EMISSIONS IN SINGLE CYLINDER DUAL FUEL ENGINE USING EXHAUST GAS RECIRCULATION AND VARYING PRESSURES |
B. Nageswara Rao, B. Sudheer Prem Kumar, K. Vijaya Kumar Reddy, |
Volume 5,Issue 5,Year 2014 |
International Journal of Advanced Research in Engineering and Technology |
| 100 |
EXPERIMENTAL STUDIES ON ANTIOXIDANT PROPERTIES OF CALOTROPIS GIGANTEA SOLVENT EXTRACTS |
David Mandepudi, Bharath Kumar Ravuru, Bhavani Mandepudi, |
Volume 4,Issue 4,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 101 |
THE BER PERFORMANCE OF OFDM SIGNAL THROUGH MULTIPATH CHANNELS (AWGN, RAYLEIGH & RICIAN) BY USING CLIPPING |
R. Anil Kumar, K. Satya Prasad, |
Volume 8,Issue 6,Year 2017 |
International Journal of Electronics and Communication Engineering and Technology |
| 102 |
MODELING AND OPTIMIZATION OF CUTTING PARAMETERS IN HIGH-SPEED DRY MACHINING OF INCONEL 718 ALLOY |
B.Satyanarayana , G. Ranga Janardhana, D. Hanumantha Rao, |
Volume 4,Issue 4,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 103 |
REDUCTION OF TORSIONAL OSCILLATIONS IN LARGE TURBINE-GENERATOR SET USING THYRISTOR CONTROLLED BRAKING RESISTORS (TCBR) |
Kiran Kumar Karampudi, Harish Cholleti, Ankamma Rao J, |
Volume 6,Issue 4,Year 2015 |
International Journal of Electrical Engineering and Technology |
| 104 |
STUDY THE EFFECT OF DIFFERENT OPERATING PARAMETERS ON HEAT TRANSFER COEFFICIENT IN GAS-SOLID FLUIDIZED BED USING HORIZONTAL HEAT TRANSFER PROBE |
Basma Abdulhadi Beddai, A.V.S.S.K.S.Gupta , M.T.Naik , Ammar Arab Beddai, |
Volume 5,Issue 7,Year 2014 |
International Journal of Advanced Research in Engineering and Technology |
| 105 |
DETECTION AND LOCATION OF FAULTS IN THREE PHASE UNDER GROUND POWER CABLE USING WAVELET TRANSFORM |
D.Prabhavathi , K. Prakasam , M.Surya Kalavathi, B.Ravindra Nath Reddy, |
Volume 6,Issue 4,Year 2015 |
International Journal of Electrical Engineering and Technology |
| 106 |
ANALYSIS OF VERY FAST TRANSIENT OVER VOLTAGES IN GAS INSULATED SUBSTATION |
K. Prakasam , D.Prabhavathi , M.Surya kalavathi, B.Ravindranath Reddy, |
Volume 6,Issue 4,Year 2015 |
International Journal of Electrical Engineering and Technology |
| 107 |
CARRIER BASED HYBRID PWM ALGORITHM WITH REDUCED COMMON MODE VOLTAGE FOR THREE PHASE VOLTAGE SOURCE INVERTER FED INDUCTION MOTOR DRIVES |
Pradeep B Jyoti, J.Amarnath , Subba Rayadu, |
Volume 6,Issue 1,Year 2015 |
International Journal of Electrical Engineering and Technology |
| 108 |
THREE PHASE SEVENTEEN LEVEL SINGLE SWITCH CASCADED MULTILEVEL INVERTER FED INDUCTION MOTOR |
S. Naresh , B. Dhanadeepika , M. Nagaraju , |
Volume 7,Issue 4,Year 2016 |
International Journal of Advanced Research in Engineering and Technology |
| 109 |
SEISMIC ANALYSIS OF RC ELEVATED WATER TANK IN DIFFERENT SEISMIC ZONES |
L.Raghava Naidu, H. Sudarsana Rao, Vaishali G.Ghorpade, |
Volume 10,Issue 2,Year 2019 |
International Journal of Civil Engineering and Technology |
| 110 |
BUILT IN REDUNDANCY ALGORITHMS FOR MEMORY YIELD ENHANCEMENT |
V.R. Seshagiri Rao, Asha Rani.M, |
Volume 9,Issue 3,Year 2018 |
International Journal of Electronics and Communication Engineering and Technology |
| 111 |
DATA FALSIFICATION LENIENT SECURE SPECTRUM SENSING BY COGNITIVE USER RELIABILITY VERIFICATION |
N. Shribala , P.Srihari , B.C.Jinaga , |
Volume 7,Issue 3,Year 2016 |
International Journal of Electronics and Communication Engineering and Technology |
| 112 |
STRENGTH ASSESSMENT OF BLENDED CEMENT CONCRETE WITH WATER CONTAINING SULPHURIC ACID |
H. Sudarsana Rao, Vaishali G.Ghorpade, |
Volume 4,Issue 5,Year 2013 |
International Journal of Civil Engineering and Technology |
| 113 |
COMPACT DESIGN OF MILLIMETER WAVE BANDPASS FILTERS WITH THREE COUPLED FINLINE AND DIFFERENT COMBINATIONS OF SPLIT RING RESONATORS |
V. Madhusudana Rao, B.Prabhakara Rao, |
Volume 8,Issue 4,Year 2017 |
International Journal of Electronics and Communication Engineering and Technology |
| 114 |
A REVIEW PAPER ON PERFORMANCE ANALYSIS OF MIMO BASED OFDMA SYSTEM UNDER FADING CHANNEL |
Lalitha Kumari, M. N. Giri Prasad, |
Volume 8,Issue 1,Year 2017 |
International Journal of Electronics and Communication Engineering and Technology |
| 115 |
SIDE LOBE REDUCTION OF CIRCULAR ARRAY USING TAYLOR DISTRIBUTION FUNCTION IN RADAR APPLICATIONS |
K.Nunvitha , M.Mounika , G.Saikumar , K.Neelima , M.M.Dasu , |
Volume 7,Issue 2,Year 2016 |
International Journal of Electronics and Communication Engineering and Technology |
| 116 |
WAVELET BASED DOUBLE- LINE AND DOUBLE LINE -TO- GROUND FAULT DISCRIMINATION IN A THREE TERMINAL TRANSMISSION CIRCUIT |
J.Uday Bhaskar, Sk. Abdul Gafoor, J.Amarnath , |
Volume 5,Issue 8,Year 2014 |
International Journal of Electrical Engineering and Technology |
| 117 |
ESTIMATION OF VEHICULAR POLLUTION GROWTH AND THEIR IMPACTS ON AIR QUALITY: A MODEL STUDY |
K.Yugandhar Reddy, K.V.S.G.Murali Krishna, I.Srinivasa Reddy, SS. Asadi , |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 118 |
MOVEMENT OF METALLIC PARTICLE CONTAMINANTS OF VARIOUS DIMENSIONS IN 1-Ø DIELECTRIC COATED GAS INSULATED BUSDUCT |
P. Nagarjuna Reddy, J.Amarnath , |
Volume 5,Issue 4,Year 2014 |
International Journal of Electrical Engineering and Technology |
| 119 |
OPTIMAL LOCATION OF SVC FOR REAL POWER LOSS MINIMIZATION AND VOLTAGE STABILITY ENHANCEMENT USING HARMONY SEARCH ALGORITHM |
P. Balachennaiah , M.Suryakalavathi , P. Suresh babu, |
Volume 5,Issue 1,Year 2014 |
International Journal of Electrical Engineering and Technology |
| 120 |
EFFECT OF ROTOR RESISTANCE AND COMPENSATION IN INDIRECT VECTOR CONTROL USING ARTIFICIAL NEURAL NETWORKS (ANN) |
B.Mouli Chandra, S.Tara Kalyani, |
Volume 4,Issue 4,Year 2013 |
International Journal of Electrical Engineering and Technology |
| 121 |
FUZZY LOGIC APPROACH TO CONTROL THE MAGNETIZATION LEVEL IN THE MAGNETIC CORE OF A WELDING TRANSFORMER |
Rama Subbanna. S, Kamalakar. K.S.K , Suryakalavarthi .M , |
Volume 4,Issue 3,Year 2013 |
International Journal of Electrical Engineering and Technology |
| 122 |
APPLICATION OF NEURO-FUZZY CONTROLLER IN TORQUE RIPPLE MINIMIZATION OF VECTOR CONTROLLED VSI INDUCTION MOTOR DRIVE |
Pradeep B Jyoti, J.Amarnath , D.Subbarayudu , |
Volume 4,Issue 3,Year 2013 |
International Journal of Electrical Engineering and Technology |
| 123 |
THE SCHEME OF THREE-LEVEL INVERTERS BASED ON SVPWM OVERMODULATION TECHNIQUE FOR VECTOR CONTROLLED INDUCTION MOTOR DRIVES |
Pradeep B Jyoti, J.Amarnath , D.Subbarayudu , |
Volume 4,Issue 2,Year 2013 |
International Journal of Electrical Engineering and Technology |
| 124 |
PVG BASED SMART ENERGY MODELLING FOR AGRICULTURAL SECTOR |
Ch.Venkateswra Rao, S.S.Tulasiram , B. Brahmaiah , |
Volume 4,Issue 2,Year 2013 |
International Journal of Electrical Engineering and Technology |
| 125 |
A REALISTIC ESTIMATION OF ENERGY SAVING WITH RENEWABLE ENERGY SOURCES IN DOMESTIC SECTOR |
A. Srinivasa Rao, S.V. L. Narasimham , B.Suresh Kumar, |
Volume 4,Issue 1,Year 2013 |
International Journal of Electrical Engineering and Technology |
| 126 |
OBJECT TRACKING ROBOT ENVISION USING MESSAGE QUEUING TELEMETRY TRANSPORT (MQTT) PROTOCOL |
Bhavana Godavarthi, Y Mrudula , V Syam Babu, Paparao Nalajala, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 127 |
EVALUATION OF OPTIMUM PROCESS PARAMETERS IN DRILLING PROCESS OF HYBRID COMPOSITES USING TAGUCHI METHOD |
Syed Mohibuddin Bukhari, M. Manzoor Hussain, |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 128 |
EFFECT OF CARBON CONTENT ON RAIL STEEL |
S. Lovaraju , V Jaya Prasad, G Swami Naidu, A Sunny Kumar, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 129 |
EVALUATION OF TEXTURE, MICROSTRUCTURE AND MICROHARDNESS OF COMMERCIALLY PURE TITANIUM (GRADE 1/BT 1-00) |
Ananda Mohan Vemula, G. Chandra Mohan Reddy, M. Manzoor Hussain, |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 130 |
SLIDING WEAR OF AA6061/CARBON BLACK METAL MATRIX COMPOSITES |
T. Prasad , A. Chennakesava Reddy, |
Volume 8,Issue 2,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 131 |
OPTIMIZATION OF A SINGLE CYLINDER, 4-STROKE DIESEL ENGINE PERFORMANCE PARAMETERS USING DIESEL/COTTON SEED OIL BLEND WITH HYDROGEN INDUCTION BY TAGUCHI METHOD |
Naseeb Khan, B. BaluNaik , Syed Yousufuddin, V. V. Satyanarayana , |
Volume 8,Issue 1,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 132 |
DEEP METALLIC SURFACE DEFECT DETECTION |
K. Sunitha , |
Volume 12,Issue 5,Year 2021 |
International Journal of Electrical Engineering and Technology |
| 133 |
SECURE AND EFFICIENT ROUTING SCHEMES AND THEIR DESIGN CHALLENGES IN WIRELESS SENSOR NETWORKS |
Mohammad Sirajuddin, B. Sateesh Kumar, |
Volume 12,Issue 5,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 134 |
WEIGHT LOSS FUNCTIONS FOR TOLERABLE WEAR RATE OF AA1100/BN METAL MATRIX COMPOSITES |
Chennakesava R Alavala, |
Volume 7,Issue 5,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 135 |
OPTIMIZATION OF ENGINE OPERATING PARAMETERS |
C. Srinath , Chandrashekar Patil, Nandkishore D. Rao, B. Sudheer Premkumar, |
Volume 5,Issue 9,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 136 |
EFFECT OF FIBER ORIENTATION ON THE MECHANICAL BEHAVIOR OF GLASS FIBER/EPOXY HYBRID NANOCOMPOSITES CONTAINING MULTI WALLED CARBON NANOTUBES AND GRAPHENE |
Seshaiah.Turaka , K. Vijaya Kumar Reddy, |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 137 |
INFLUENCE OF TOOL PIN PROFILE ON MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF FRICTION STIR WELDED AA7075/WC METAL MATRIX COMPOSITES |
Arun Babu Nallabelli, Balu Naik Banoth, |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 138 |
EFFECT OF TOOL ROTATIONAL SPEED ON MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF FRICTION STIR WELDED AA7075/WC METAL MATRIX COMPOSITES |
Arun Babu Nallabelli, Balu Naik Banoth, B. Ravi , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 139 |
STUDY OF HALL CURRENT AND RADIATION EFFECTS ON MHD FREE CONVECTIVE FLOW PAST AN INCLINED PARABOLIC ACCELERATED PLATE WITH VARIABLE TEMPERATURE IN A POROUS MEDIUM |
B. Shankar Goud, PudhariSrilatha , MN Raja Shekar, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 140 |
ENERGY EFFICIENT COST BASED ROUTING PROTOCOL FOR WSN |
Syed Mohd Ali , Syed Abdul Sattar, D Srinivasa Rao, |
Volume 9,Issue 3,Year 2018 |
International Journal of Advanced Research in Engineering and Technology |
| 141 |
ENHANCED SEISMIC RESISTANCE OF STEEL BUILDINGS USING VISCOUS FLUID DAMPERS |
PouyaAzarsa , Mahdi Hosseini, Seyed Amin Ahmadi, N.V. Ramana Rao, |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
| 142 |
DEVELOPMENT OF ADVANCED METHODOLOGY FOR GENERATING REDUCED-ORDER MODELS OF LINEAR SUB CIRCUITS |
Dasari. Govardhan , A. Krishnaiah , AVSSKS Gupta , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 143 |
OPTIMIZATION OF JSS PROBLEM USING FLEXSIM SIMULATION SOFTWARE |
Bejagam Naga Raju, Bonu Naveen kumar, Payaavula Rajendra Mouli, M. Saichander Reddy, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 144 |
EFFECTS OF THERMAL RADIATION AND MHD ON THE UNSTEADY FREE CONVECTION AND MASS TRANSFORM FLOW PAST AN EXPONENTIALLY ACCELERATED VERTICAL PLATE WITH VARIABLE TEMPERATURE A FINITE ELEMENT SOLUTION |
Pudhari Srilatha, M N Raja Shekar, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 145 |
CHARACTERIZATION OF DELAMINATION BEHAVIOR OF CARBON/EPOXY LAMINATES USING DOUBLE CANTILEVER BEAM (DCB) SPECIMENS |
P. Ashok Kumar, P. Ravinder Reddy, AVSSKS Gupta , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 146 |
MODEL REDUCTION OF CFD SIMULATION OF INTEGRATED CIRCUIT COOLING OF AN ELECTRONICS PACKAGING |
Dasari Govardhan, A. Krishnaiah , AVSSKS Gupta , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 147 |
PERFORMANCE CHARACTERISTICS OF A VARIABLE COMPRESSION RATIO ENGINE USING ESTERIFIED COTTON SEED OIL |
S Venkateswara Satesh, T CH Siva Reddy, K. Vijaya Kumar Reddy, |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 148 |
MALICIOUS URL DETECTION AND PREVENTION AT BROWSER LEVEL FRAMEWORK |
M. Sridevi , K.V.N. Sunitha , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 149 |
EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF MIXING BEHAVIOUR OF BIOMASS WITH INERT SAND IN FLUIDIZED BED |
B.J.M. Rao , K.V.N.S. Rao , G. Ranga Janardhana, |
Volume 8,Issue 9,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 150 |
ANALYSIS AND FABRICATION OF ALUMINIUM ALLOY AA6061 BUTT JOINT USING FRICTION STIR WELDING |
G Sarat Raju, B.Balunaik , D.V.Ravi Shankar, Dussa Govardhan, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 151 |
AVAILABILITY TRANSFER CAPABILITY ENHANCEMENT USING STATIC SYNCHRONOUS SERIES COMPENSATOR IN DEREGULATED POWER SYSTEM |
D. Bala Gangi Reddy, M. Suryakalavathi , |
Volume 3,Issue 2,Year 2012 |
International Journal of Electrical Engineering and Technology |
| 152 |
A HYBRID POLYGONAL SV STRUCTURE FOR THE V/F CONTROL OF AN INDUCTION MOTOR WITH OPEN END WINDING |
Snehaprabha T V , Sanjay Lakshminarayanan, |
Volume 3,Issue 2,Year 2012 |
International Journal of Electrical Engineering and Technology |
| 153 |
EFFECT OF WELDING PARAMETERS ON MECHANICAL PROPERTIES OF FRICTION STIR WELDED JOINTS OF AA6082 AND AA6061 ALUMINIUM ALLOYS |
P. Radha Krishna Prasad, P. Ravinder Reddy, K. Eshwar Prasad, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 154 |
OPTIMIZATION OF TAPER RATIO AND PRE TWIST ANGLE FOR DESIGN OF GAS TURBINE BLADE WITH RESPECT TO THE STRUCTURAL CRITERIA |
Kalapala Prasad, B. Anjaneya Prasad, M. Anandarao , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 155 |
EVALUATION OF REFERENCE EVAPOTRANSPIRATION ESTIMATION METHODS AND DEVELOPMENT OF CROP COEFFICIENT MODELS |
G. Bogayya Naidu, K. V. SivaKumar Babu, V. Srinivasulu , |
Volume 6,Issue 11,Year 2015 |
International Journal of Civil Engineering and Technology |
| 156 |
GEO-SPATIAL TECHNOLOGIES IN SHORELINE ANALYSIS, VARIABILITY AND EROSION |
K. V. SivaKumar Babu, G. Bogayya Naidu, V. Srinivasulu , |
Volume 6,Issue 11,Year 2015 |
International Journal of Civil Engineering and Technology |
| 157 |
INVENTION WITH AUTOMATIC CATEGORIZATION OF AL-7075-T6 WITH FLY ASH COMBINED BY SWIRL CAST HOT DIE PATTERN PROCEDURE |
A.Seshappa , P.Prasanna , B. Subbaratnam , S. Naresh Kumar, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 158 |
OPTIMIZATION OF SIGNIFICANT PARAMETER ON MECHANICAL ACTIVITIES OF ALMG1SICU FUSION METAL MATRIX COMPOSITES WITH TAGUCHI INCLUDED FUZZY APPROACH |
A.Seshappa , B.Venkatesh , T.Vijaybabu , P.Prasnna , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 159 |
TRANSIENT ANALYSIS OF SMART COMPOSITE LAMINATE PLATES USING HIGHER ORDER THEORY |
P. Veera Sanjeeva Kumar, B. Chandramohan Reddy, K. Vijaya Kumar Reddy, |
Volume 7,Issue 6,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 160 |
EXPERIMENTAL ANALYSIS OF MAGNETORHEOLOGICAL FLUID (MRF) DAMPERS UNDER TRIANGULAR EXCITATION |
M. Raju , N. Seetharamaiah , A.M.K. Prasad , M.A. Rahman , |
Volume 7,Issue 6,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 161 |
DESIGN AND FINITE ELEMENT ANALYSIS OF MR FLUID DAMPER FOR STRUCTURAL VIBRATION MITIGATION |
G. Sailaja , N. Seetharamaiah , M. Janardhana , |
Volume 7,Issue 4,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 162 |
EXPERIMENTAL INVESTIGATION TO OPTIMIZE PARAMETERS OF REVERSE ENGINEERING TECHNOLOGY FOR RECONSTRUCTING FREEFORM SURFACES |
G. Sreeram Reddy, Manzoor Hussian, V. V. Satyanarayana , |
Volume 7,Issue 4,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 163 |
FINITE ELEMENT ANALYSIS OF DISC BRAKE ROTOR USING DIFFERENT MATERIALS |
V. Saritha , Vinayak G. Kachare, |
Volume 7,Issue 6,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 164 |
DEXTERITY INDICES OF 6-UPS PARALLEL MANIPULATOR |
Sri Rama Jayakrishna, G. Satish Babu, |
Volume 6,Issue 12,Year 2015 |
International Journal of Mechanical Engineering and Technology |
| 165 |
EFFECT ON PERFORMANCE AND COMBUSTION CHARACTERISTICS OF DIESEL ENGINE ENRICHED WITH HYDROGEN WITH VARIED PISTON BOWL GEOMETRY |
U.S. Jyothi , K. Vijaya Kumar Reddy, |
Volume 6,Issue 10,Year 2015 |
International Journal of Mechanical Engineering and Technology |
| 166 |
EFFECT OF WELDING CURRENT ON WELDING SPEED AND ULTIMATE TENSILE STRENGTH (UTS) OF MILD STEEL |
Syambabu Nutalapati, D. Azad , G. Swami Naidu, |
Volume 7,Issue 5,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 167 |
PERFORMANCE AND EMISSION ANALYSIS OF POROUS MEDIA COMBUSTION CHAMBER IN DIESEL ENGINES FOR DIFFERENT FUEL BLENDS |
B. V. Krishnaiah , B. Balu Naik, |
Volume 7,Issue 3,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 168 |
FABRICATION AND ANALYSIS OF MECHANICAL PROPERTIES OF FRP COMPOSITES |
M.Ananda Rao, K. Vijaya Kumar Reddy, T.Seshaiah , |
Volume 5,Issue 8,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 169 |
FORCE ISOTROPY OF THREE-LIMB SPATIAL PARALLEL MANIPULATOR |
A. Chandrashekhar , G. Satish Babu, |
Volume 6,Issue 6,Year 2015 |
International Journal of Mechanical Engineering and Technology |
| 170 |
MANIPULABILITY INDEX OF A PARALLEL ROBOT MANIPULATOR |
A. Harish , G. Satish Babu, |
Volume 6,Issue 6,Year 2015 |
International Journal of Mechanical Engineering and Technology |
| 171 |
ANALYZE THE THERMAL PROPERTIES BY VARYING GEOMETRY, MATERIAL AND THICKNESS OF CYLINDER FINS |
Thammala Praveen, P.Sampath Rao, |
Volume 6,Issue 6,Year 2015 |
International Journal of Mechanical Engineering and Technology |
| 172 |
THERMO HYDRAULICS PERFORMANCE OF TURBULENT FLOW HEAT TRANSFER THROUGH SQUARE DUCTS WITH INSERTS |
M. Udaya Kumar, M. Manzoor Hussain, Yousuf Ali, |
Volume 5,Issue 11,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 173 |
EXPERIMENTAL VALIDATION AND COMBUSTION CHAMBER GEOMETRY OPTIMIZATION OF DIESEL ENGINE BY USING DIESEL -RK |
SK. Abdul Siddique, K. Vijaya Kumar Reddy, |
Volume 6,Issue 2,Year 2015 |
International Journal of Mechanical Engineering and Technology |
| 174 |
STUDIES ON EXHAUST EMISSIONS FROM CERAMIC COATED DIESEL ENGINE WITH WASTE FRIED VEGETABLE OIL BASED BIODIESEL |
R.P. Chowdary , M.V.S. Murali Krishna, T. Kishen Kumar Reddy, |
Volume 5,Issue 7,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 175 |
STUDIES ON EXHAUST EMISSIONS OF A FOUR-STROKE COPPER COATED SPARK IGNITION ENGINE WITH GASOHOL WITH IMPROVED DESIGN OF A CATALYTIC CONVERTER |
Y. Nagini , M.V.S. Murali Krishna, S.Naga Sarada, |
Volume 5,Issue 4,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 176 |
EXPERIMENTAL INVESTIGATION ON SPECIFIC HEAT OF PSIDIUM GUAJAVA L (GUAVA FRUIT) AS A FUNCTION OF MOISTURE CONTENT AND TEMPERATURE |
B Durga Prasad, M Basavaraj , Shiva Kumar Modi, |
Volume 4,Issue 6,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 177 |
PARAMETRIC INVESTIGATIONS ON THE FLOW CHARACTERISTICS OF A CLOSED LOOP PULSATING HEAT PIPE - A NUMERICAL STUDY |
CH. Sreenivasa Rao, AVSSKS Gupta , K Ramanarasimha , |
Volume 5,Issue 9,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 178 |
VALIDATION OF HARDNESS AND TENSILE STRENGTH OF AL 7075 BASED HYBRID COMPOSITES USING ARTIFICIAL NEURAL NETWORKS |
M. Sreenivasa Reddy, Soma V. Chetty, Sudheer Premkumar, Reddappa H N , |
Volume 5,Issue 9,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 179 |
THEORITICAL INVESTIGATIONS OF INJECTION PRESSURE IN A FOUR STROKE DI DIESEL ENGINE WITH ALCOHOL AS FUEL |
S.Sunil Kumar Reddy, V. Pandurangadu , |
Volume 4,Issue 2,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 180 |
MICROMECHANICAL ANALYSIS OF FRP COMPOSITES |
Syam Prasad.A, Syed Altaf Hussain, Pandurangadu.V , |
Volume 4,Issue 2,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 181 |
EFFECT OF VARIATION IN COMPRESSION RATIO ON CHARACTERISTICS OF CI ENGINE FUELLED WITH HONGE OILETHANOL BLEND |
Nandkishore D. Rao, B. Sudheer Premkumar, Jaganath.S , |
Volume 4,Issue 4,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 182 |
ENUMERATION AND VALIDATION OF HYDRODYNAMIC CHARACTERISTICS OVER PLANE AND SERRATED SLOPES |
D. Swetha , K. Ramamohan Reddy, |
Volume 4,Issue 4,Year 2013 |
International Journal of Civil Engineering and Technology |
| 183 |
FINITE ELEMENT ANALYSIS AND EXPERIMENTAL INVESTIGATIONS ON SMALL SIZE WIND TURBINE BLADES |
T.Vishnuvardhan , B.Durga Prasad, |
Volume 3,Issue 3,Year 2012 |
International Journal of Mechanical Engineering and Technology |
| 184 |
NN/BRT BASED MODEL FOR EVALUATING IMPACT OF TQM ON HIGHER TECHNICAL EDUCATION |
Irfan Gulbarga, Soam V Chetty, Jagadeesh P Ganjigatti, |
Volume 3,Issue 2,Year 2012 |
International Journal of Mechanical Engineering and Technology |
| 185 |
EARTHQUAKE RISKS AND EFFECTIVE OF EARTHQUAKE LOAD AND WIND LOAD ON BEHAVIOR OF SHEAR WALL IN FRAME STRUCTURE |
Mahdi hosseini, Ahmed Najm Abdullah Al-Askari, N.V.Ramana Rao, |
Volume 5,Issue 8,Year 2014 |
International Journal of Civil Engineering and Technology |
| 186 |
STUDIES ON IMPACT OF MINING ON SURFACE AND GROUNDWATER. |
G. Sreenivasa Rao, A. Manjunath , MVSS Giridhar , |
Volume 5,Issue 6,Year 2014 |
International Journal of Civil Engineering and Technology |
| 187 |
STUDY ON STRENGTH AND DURABILITY CHARACTERISTICS OF TERNARY CONCRETE |
G. Saranya , CH. KannamNaidu , K. Krishnakumar , G. Gowrisankara Rao, |
Volume 5,Issue 7,Year 2014 |
International Journal of Civil Engineering and Technology |
| 188 |
EARTH QUAKE RISKS AND ITS REDUCTION METHODS FOR HILL REGIONS USING DAMPERS TECHNOLOGY |
Mahdi hosseini, N.V.Ramana Rao, Mohammad yousef DastjaniFarahani, |
Volume 5,Issue 7,Year 2014 |
International Journal of Civil Engineering and Technology |
| 189 |
COMPARISON OF PIER CAP ANALYSIS AND REHABILITATION USING AASHTO AND LRFD SPECIFICATIONS |
Mohammad Yousef Dastajani Farahani, K Rama Mohan Rao, Mahdi Hosseini, |
Volume 5,Issue 7,Year 2014 |
International Journal of Civil Engineering and Technology |
| 190 |
AN EXPERIMENTAL INVESTIGATION OF TERNARY BLENDED HYBRID FIBER REINFORCED CONCRETE (MK: FA: GGBS): STEEL & POLYPROPYLENE FIBERS |
K. Nagaraja , H. Sudarshan Rao, |
Volume 10,Issue 6,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 191 |
COMPARATIVE ANALYSIS OF ADVANCED STATISTICAL TECHNIQUES FOR OPTIMIZATION OF HYBRID MOBILE RADIO PATH LOSS MODEL |
A. Bhuvaneshwari , R. Hemalatha , T. Satya Savithri, |
Volume 8,Issue 4,Year 2017 |
International Journal of Advanced Research in Engineering and Technology |
| 192 |
COMPARISON OF ANN ALGORITHMS TO DETECT THE SATURATION LEVEL IN THE MAGNETIC CORE OF A WELDING TRANSFORMER |
Rama Subbanna. S, Lahari .J.N , Usha Rani .K.R, Suryakalavarthi .M , |
Volume 5,Issue 3,Year 2014 |
International Journal of Advanced Research in Engineering and Technology |
| 193 |
REMOTE SENSING SATELLITE DATA DEMODULATION AND BIT SYNCHRONIZATION |
A.N.Satyanarayana , Y. VenkataRami Reddy, B.C.S.Rao , |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 194 |
PERFORMANCE CHARACTERISTICS FOR THE USE OF BLENDED SAFFLOWER OIL IN DIESEL ENGINE |
A. Swarna Kumari, Ch.Penchalayya , A.V. Sita Rama Raju, D.Vinay Kumar, |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 195 |
DEVELOPMENT OF BACK PROPAGATION NEURAL NETWORK MODEL TO PREDICT PERFORMANCE AND EMISSION PARAMETERS OF A DIESEL ENGINE |
Shailaja M , V.Vijaya Kumar, Chandragiri Radha Charan, A V Sitarama Raju, |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 196 |
INFLUENCE OF DESIGN PARAMETERS IN WELD JOINT PERFORMANCE |
Maqbool Ahmed, M. Azizuddin , B.Balakrishna , |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 197 |
BIOGAS -DIESEL DUAL FUEL ENGINE EXHAUST GAS EMISSIONS |
Shaik Magbul Hussain, B. Sudheer Premkumar, K. Vijaya Kumar Reddy, |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 198 |
SECURITY ISSUES VS USER AWARENESS IN MOBILE DEVICES: A SURVEY |
Khaja Mizbahuddin Quadry, Mohammed Misbahuddin, A.Govardhan , |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 199 |
SPACE VECTOR BASED DECOUPLED PWM TECHNIQUES FOR OPEN END WINDING INDUCTION MOTOR DRIVE |
M. Ranjit , T. Bramhananda Reddy, M. Suryakalavathi , |
Volume 8,Issue 6,Year 2017 |
International Journal of Electrical Engineering and Technology |
| 200 |
A MODIFIED PSO BASED GRAPH CUT ALGORITHM FOR THE SELECTION OF OPTIMAL REGULARIZING PARAMETER IN IMAGE SEGMENTATION |
Shameem Akthar, D Rajaylakshmi , Syed Abdul Sattar, |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 201 |
EFFECT OF VISCOUS DISSIPATION ON MHD FLOW AND HEAT TRANSFER OF A NON-NEWTONIAN POWER-LAW FLUID PAST A STRETCHING SHEET WITH SUCTION/INJECTION |
M N Raja Shekar, Shaik Magbul Hussain, |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 202 |
EFFECT OF VISCOUS DISSIPATION ON MHD FLOW OF A FREE CONVECTION POWER-LAW FLUID WITH A PRESSURE GRADIENT |
M N Raja Shekar, Shaik Magbul Hussain, |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 203 |
LOW ENERGY CONSUMPTION HVAC SYSTEMS FOR GREEN BUILDINGS USING CHILLED BEAM TECHNOLOGY |
Syed Moazzam Ali, Balu Naik Banoth, |
Volume 4,Issue 3,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 204 |
STUDIES ON THE BEHAVIOUR OF SULPHATE ATTACK RESISTANCE OF LOW CALCIUM FLY ASH AND SLAG BASED GEOPOLYMER CONCRETE |
T Srinivas , N V Ramana Rao, |
Volume 10,Issue 2,Year 2019 |
International Journal of Civil Engineering and Technology |
| 205 |
EFFECT OF SIZE OF COARSE AGGREGATE ON PROPERTIES OF PERVIOUS CONCRETE |
D. Tarangini , B. Radha Kiranmaye, P. Sravana , Naveen , |
Volume 10,Issue 1,Year 2019 |
International Journal of Civil Engineering and Technology |
| 206 |
MODELLING AND ANALYSIS OF FLYOVER DECK SLAB WITH U-BOOT TECHNOLOGY |
H. Sudarsana Rao, M. Surya Prasanth, |
Volume 9,Issue 8,Year 2018 |
International Journal of Civil Engineering and Technology |
| 207 |
ANALYSIS AND DESIGN OF STRESS RIBBON BRIDGE WITH CSI BRIDGE SOFTWARE |
Mahendrakar Hemanth Kumar, Vaishali. G. Ghorpade , H. Sudarsana Rao, |
Volume 9,Issue 10,Year 2018 |
International Journal of Civil Engineering and Technology |
| 208 |
The influence of adding alccofine and nano-silica on the behavior of concrete at elevated temperatures |
K Ashwini , P Srinivasa Rao, |
Volume 14,Issue 20,Year 2021 |
Indian Journal of Science and Technology |
| 209 |
MACHINE LEARNING APPROACH TO ANOMALY DETECTION IN CYBER SECURITY WITH A CASE STUDY OF SPAMMING ATTACK |
Goverdhan Reddy Jidiga, P Sammulal , |
Volume 4,Issue 3,Year 2013 |
International Journal of Computer Engineering and Technology |
| 210 |
META-HEURISTIC BASED CLUSTERING OF TWO-DIMENSIONAL DATA USING NEIGHBOURHOOD SEARCH WITH DATA MINING TECHNIQUE AS AN APPLICATION OF P-MEDIAN PROBLEM |
D.Srinivas Reddy, A.Govardhan , S.S.V.N. Sarma , |
Volume 4,Issue 3,Year 2013 |
International Journal of Computer Engineering and Technology |
| 211 |
STRENGTH BEHAVIOR OF DIFFERENT LIMETREATED EXPANSIVE SOILS WITH RANGE ANALYSIS |
Bomidi. Varaprasada Rao, Kollipara. Padma Kumari, Nandyala. Darga Kumar, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 212 |
STUDIES ON DURABILITY PROPERTIES OF HIGH STRENGTH SELF-COMPACTING CONCRETE -A REVIEW |
C Chandana Priya, M V Seshagiri Rao, V Srinivasa Reddy, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 213 |
MAXIMIZING LIFESPAN OF MOBILE AD HOC NETWORKS WITH QOS PROVISION ROUTING PROTOCOL |
V. Bapuji , R. Naveen Kumar, A.Govardhan , S.S.V.N. Sarma , |
Volume 3,Issue 2,Year 2012 |
International Journal of Computer Engineering and Technology |
| 214 |
MINING NON-REDUNDANT FREQUENT PATTERNS IN MULTI-LEVEL DATASETS USING MIN MAX APPROXIMATE RULES |
R. Vijaya Prakash, A. Govardhan , S.S.V.N. Sarma , |
Volume 3,Issue 2,Year 2012 |
International Journal of Computer Engineering and Technology |
| 215 |
STUDY ON MODELS OF PERFORMANCE EVALUATION OF SOFTWARE ARCHITECTURES |
G.Kasi Reddy, D.Sravan Kumar, |
Volume 3,Issue 2,Year 2012 |
International Journal of Computer Engineering and Technology |
| 216 |
BLACKLISTING AND BLOCKING ANONYMOUS CREDENTIAL USERS |
H. Jayasree , A. Damodaram , |
Volume 3,Issue 3,Year 2012 |
International Journal of Computer Engineering and Technology |
| 217 |
AN APPROACH TO REVOKE BLACKLISTED ANONYMOUS CREDENTIAL USERS THROUGH TTP |
H. Jayasree , A. Damodaram , |
Volume 3,Issue 3,Year 2012 |
International Journal of Computer Engineering and Technology |
| 218 |
SECURE CLUSTER BASED APPROACH FOR MANETS |
Syeda Kausar Fatima, Syed Abdul Sattar, D Srinivasa Rao, |
Volume 5,Issue 6,Year 2014 |
International Journal of Electronics and Communication Engineering and Technology |
| 219 |
A FRAMEWORK FOR PERSONALIZATION USING QUERY LOG AND CLICKTHROUGH DATA |
Vijayalakshmi. K , Sudarson Jena, D. Vasumathi , R. Rajeswara Rao, |
Volume 5,Issue 2,Year 2014 |
International Journal of Computer Engineering and Technology |
| 220 |
SEGMENTATION OF TEXT LINES USING SUB-IMAGE PROFILE FOR MACHINE PRINTED TELUGU SCRIPT |
J. Bharathi , P. Chandrasekhar Reddy, |
Volume 4,Issue 6,Year 2013 |
International Journal of Computer Engineering and Technology |
| 221 |
OPTIMIZED COVERAGE AND CONNECTIVITY FOR RANDOMLY DEPLOYED WIRELESS SENSOR NETWORK FOR LIFETIME CONSERVATORY |
Deepak S.Sakkari, T.G.Basavaraju , |
Volume 4,Issue 6,Year 2013 |
International Journal of Computer Engineering and Technology |
| 222 |
A SYSTEMATIC APPROACH FOR THE ASSESSMENT OF ENVIRONMENTAL QUALITY AT THERMAL POWER PLANTS USING GEO SPATIAL TECHNOLOGY: A MODEL STUDY |
M.V. Raju , M. Satish Kumar, Hepsibah Palivela, G. Venu Ratna Kumari, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 223 |
A Novel Feature Selection Method for the Detection and Classification of Power Quality Disturbances |
Aslam Shaik, A. Srinivasula Reddy, |
Volume 20,Issue 1,Year 2019 |
International Journal of Simulation: Systems, Science and Technology |
| 224 |
COMPARATIVE STUDY ON ESTIMATION OF VARIOUS EVAPOTRANSPIRATION TECHNIQUES WITH PENMAN-MONTEITH METHOD |
Ch. V. S. S. Sudheer , G. K. Viswandh , G. V. Ramana , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 225 |
WATER QUALITY SCENARIO OF URBAN POLLUTED LAKES - A MODEL STUDY |
M. Satish Kumar, M.V. Raju , Hepsibah Palivela, G. Venu Ratna Kumari, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 226 |
ESTIMATION OF RUNOFF FOR AGRICULTURAL UTILIZATION USING GEOINFORMATICS: A MODEL STUDY FROM TELANGANA STATE |
M. V. Raju , SS. Asadi , M. Satish Kumar, Hepsibah Palivela, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
| 227 |
ASSESSMENT OF HEAVY METAL CONCENTRATION IN GROUND WATER BY USING REMOTE SENSING AND GIS |
M. Satish Kumar, SS. Asadi , S.S. Vutukuru , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
| 228 |
EVALUATION OF COST AND TIME IMPACTS TO OVERRUNS IN CONSTRUCTION INDUSTRY |
M.V. Raju , SS. Asadi , M. Satish Kumar, Hepsibah Palivela, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
| 229 |
THERMAL EFFECT ON MECHANICAL PROPERTIES OF BLENDED CONCRETE USING METAKAOLIN AND MICRO SILICA |
Balakrishnaiah. D , Balaji, K.V. G. D , P Srinivasa Rao, T. Santhosh Kumar, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 230 |
COMPREHENSIVE INDEX OF GROUNDWATER PROSPECTS BY USING STANDARD PROTOCOLS - A MODEL STUDY |
M. Satish Kumar, M.V. Raju , Hepsibah Palivela, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 231 |
LOW POWER DESIGN TECHNIQUES OF CMOS DIGITAL CIRCUITS |
P.Sreenivasulu , Krishnna veni, K.Srinivasa Rao, A.Vinaya Babu, |
Volume 3,Issue 2,Year 2012 |
International Journal of Electronics and Communication Engineering and Technology |
| 232 |
ENERGY EFFICIENT INTRUSION DETECTION SYSTEM FOR WSN |
Syeda Gauhar Fatima, Syed Abdul Sattar, Anita Sheela, |
Volume 3,Issue 3,Year 2012 |
International Journal of Electronics and Communication Engineering and Technology |
| 233 |
AN OVERVIEW OF MANAGING MUNICIPAL SOLID WASTE IN URBAN AREAS - A MODEL STUDY |
M. Satish Kumar, M.V. Raju , Hepsibah Palivela, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 234 |
PERFORMANCE EVALUATION OF 8-UPS PARALLEL MANIPULATOR |
Sri Rama Jayakrishna, G. Satish Babu, |
Volume 3,Issue 2,Year 2015 |
Journal of Mechanical Engineering and Technology |
| 235 |
INTERPRETATION AND CORRELATIVE STUDY OF WATER SIMULATION IN SURFACE WATER BODIES |
M. Satish Kumar, M.V. Raju , S. Ramesh Babu, M. Siva Jagadish Kumar, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 236 |
CONCEPTUAL EVALUATION OF NOISE QUALITY IN URBAN AREAS: A MODEL STUDY |
M.V. Raju , M. Satish Kumar, G. Venu Ratna Kumari, Hepsibah Palivela, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 237 |
AN ANALYTICAL APPROACH FOR ENVIRONMENTAL POLLUTION CONTROL THROUGH SOLID WASTE MANAGEMENT: A MODEL STUDY |
K.Yugandhar Reddy, K.V.S.G.Murali Krishna, I.Srinivasa Reddy, SS. Asadi , |
Volume 8,Issue 11,Year 2017 |
International Journal of Civil Engineering and Technology |
| 238 |
EVALUATION OF GROUNDWATER PATTERN IN BLACK COTTON SOILS USING GEO SPATIAL TECHNOLOGY - A MODEL STUDY |
M. Satish Kumar, M.V. Raju , G.Venu Ratna Kumari, Hepsibah Palivela, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 239 |
MICROMECHANICALANALYSIS OF FRP COMPOSITES |
Syam Prasad.A, Syed Altaf Hussain, Pandurangadu.V , |
Volume 7,Issue 1,Year 2019 |
International Journal of Thermal Engineering |
| 240 |
ANALYSIS OF BIPARTITE RANKBOOST APPROACH FOR SCORE LEVEL FUSION OF FACE AND PALMPRINT BIOMETRICS |
B. Sateesh Kumar, A.Govardhan , |
Volume 6,Issue 4,Year 2015 |
International Journal of Computer Engineering and Technology |
| 241 |
AN EFFICIENT ANTI PHISHING FRAMEWORK BASED ON DYNAMIC CAPTCHA |
N Chandra Sekhar Reddy, Purna Chandra Rao, A. Govardhan , |
Volume 7,Issue 6,Year 2016 |
International Journal of Computer Engineering and Technology |
| 242 |
Characterization of mechanical and wear properties of ABS/SiO2 nanoparticles |
K Shiva Kumar, A. Chennakesava Reddy, |
Volume 13,Issue 37,Year 2020 |
Indian Journal of Science and Technology |
| 243 |
A NOVEL SLOTTED ALLOCATION MECHANISM TO PROVIDE QOS FOR EDCF PROTOCOL |
Naveed Farhana, H. S. N Murthy , |
Volume 7,Issue 3,Year 2016 |
International Journal of Computer Engineering and Technology |
| 244 |
Optimal Setting of Unified Power Flow Controller using Evolutionary Optimization Techniques |
Venkata Padmavathi S, Sarat Kumar Sahu, A Jayalaxmi , |
Volume 1,Issue 1,Year 2013 |
International Journal of Research in Electrical & Electronics Engineering |
| 245 |
EFFICIENT OBJECT RECOGNITION USING DISCRIMINATIVE WEIGHT LEARNING |
B. Ramesh Naik, T. Venu Gopal, |
Volume 8,Issue 3,Year 2017 |
International Journal of Computer Engineering and Technology |
| 246 |
PREDICTION OF DIABETES MELLITUS USING MACHINE LEARNING TECHNIQUES |
Temesgen Abera Asfaw, |
Volume 1,Issue 1,Year 2019 |
International Journal of Computer Applications |
| 247 |
INVENTORY HOLDING PERIOD ANALYSIS OF SAP IMPLEMENTED COMPANIES |
Kuruganty Seetha Ram Babu, A.V. Satyanarayana , A. Prabhu Kumar, |
Volume 1,Issue 2,Year 2019 |
International Journal of Computer Applications |
| 248 |
Effect on Performance, Combustion and Emissions of Diesel Engine with Varied Piston Bowl Geometry |
U.S. Jyothi , K. Vijaya Kumar Reddy, |
Volume 3,Issue 5,Year 2015 |
International Journal of Research in Mechanical Engineering |
| 249 |
Analysis of OFDM through the Turbo Codes in Noisy Channel |
R. Prakash Kumar, |
Volume 1,Issue 2,Year 2013 |
International Journal of Research in Electronics & Communication Technology |
| 250 |
Performance Improvement of an Axial Flow Compressor |
S.M. Swamy , V. Pandurangadu , |
Volume 2,Issue 3,Year 2014 |
International Journal of Engineering and Technology Research |
| 251 |
Microstructure and Mechanical Properties of Friction Stir Welded Az31b Magnesium Alloy |
G. Surya Prakash Rao, B. BaluNaik , |
Volume 3,Issue 4,Year 2015 |
International Journal of Engineering and Technology Research |
| 252 |
Effect of Sintering Temperature on Structural Properties of Al3+ Co-Substituted Ni-Zn Ferrite Nano Particles |
K. Vijaya Kumar, D.Paramesh , P. Venkat Reddy, M. Buchi Suresh, |
Volume 1,Issue 2,Year 2013 |
International Journal of Engineering and Technology Research |
| 253 |
A STUDY ON IMPROVEMENT OF STRENGTH PROPERTIES OF B.C SOILS WITH ADDITIVES |
T.L. Ramadasu , Nandyala. Darga Kumar, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
| 254 |
APPLYING UML MODELING TECHNIQUES FOR ONTOLOGIES AND SEMANTIC MODELS OF AUTONOMOUS AIR TRAFFIC FLIGHT CONTROL SYSTEM |
P. Rajarajeswari , D. Vasumathi , A.RamamohanReddy , |
Volume 3,Issue 1,Year 2012 |
International Journal of Computer Engineering and Technology |
| 255 |
AN EFFICIENT METHOD-LEVEL CODE CLONE DETECTION SCHEME THROUGH TEXTUAL ANALYSIS USING METRICS |
G. Anil kumar, C.R.K.Reddy , A. Govardhan , |
Volume 3,Issue 1,Year 2012 |
International Journal of Computer Engineering and Technology |
| 256 |
DETECTING IN-SITU MELANOMA USING MULTI PARAMETER EXTRACTION AND NEURAL CLASSIFICATION MECHANISMS |
Ruksar Fatima, Mohammed Zafar Ali Khan, A. Govardhan , Kashyap D Dhruve, |
Volume 4,Issue 1,Year 2013 |
International Journal of Computer Engineering and Technology |
| 257 |
DEVELOPMENT OF SELF-CURING CONCRETE USING POLYETHYLENE GLYCOL AS INTERNAL CURING AGENT |
M V Jagannadha Kumar, K. Jagannadha Rao, B Dean Kumar, V Srinivasa Reddy, |
Volume 9,Issue 7,Year 2018 |
International Journal of Civil Engineering and Technology |
| 258 |
ASSESSMENT OF NON-REVENUE-WATER AND ITS REDUCTION MEASURES IN URBAN WATER DISTRIBUTION SYSTEMS |
B. Rajasekhar , G.Venkata Ramana, G.K. Viswanadh , |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
| 259 |
Optimal Configurations of Kinetostatic Spatial Parallel Robots Based on Properties and Point of Isotropy |
A. Chandrashekhar , G. Satish Babu, |
Volume 3,Issue 3,Year 2015 |
International Journal of Research in Mechanical Engineering |
| 260 |
IMAGE COMPRESSION USING SAND ALGORITHM |
Karimella Vikram, Niraj Upadhayaya, A.Goverdhan , T.Madhavi Kumari, |
Volume 3,Issue 3,Year 2012 |
International Journal of Computer Engineering and Technology |
| 261 |
A Novel LISS-III Swath Extension through Wider AWiFS Swath and SVM Training and Learning |
Radhika Kammili, Venkateswara Rao Chandu, Kamakshi Prasad Valurouthu, |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
| 262 |
REVIEW ANALYSIS ON IMPORTANCE OF SWARM INTELLIGENCE AND ROBOTICS |
GOPI BATTINENI, NALINI CHINTALAPUDI, GETUGAMO SAGARO, FRANCESCO AMENTA, |
Volume 8,Issue 5,Year 2019 |
International Journal of Computer Science and Mobile Computing |
| 263 |
AN EFFICIENT TOOL FOR REUSABLE SOFTWARE COMPONENT TAXONOMY |
P.Shireesha , S.S.V.N. Sarma , A.Govardhan , |
Volume 1,Issue 2,Year 2011 |
International Journal of Computer Science and Engineering Research and Development |
| 264 |
BigData Processing using First Come First Served (FCFS) Algorithm |
M Vamshi Krishna, |
Volume 7,Issue 7,Year 2018 |
International Journal of Computer Science and Mobile Computing |
| 265 |
Influence of Chromium Doping on Electrical and Elastic Behavior of Nd0.5Sr0.5MnO3 System |
Ashok Kumar Kusuma, Elle Sagar, Gundeti Sreeram Reddy, Katrapally Vijaya Kumar, |
Volume 48,Issue 3,Year 2021 |
Bulgarian Journal of Physics |
| 266 |
PLAGIARISM DETECTION USING FUZZY SEMANTIC SIMILARITY MEASURES |
Durga Bhavani Dasari, Venu Gopala Rao. K, |
Volume 2,Issue 10,Year 2014 |
International Journal of Social Relevance & Concern |
| 267 |
Detecting The Plagiarism For Text Documents On The World Wide Web |
Durga Bhavani Dasari, Venu Gopala Rao. K, |
Volume 2,Issue 10,Year 2014 |
International Journal of Social Relevance & Concern |
| 268 |
SPEED CONTROL OF FIVE PHASE INDUCTION MOTOR DRIVE BY EMPLOYING FUZZY CONTROLLER |
C VAISHNAVI , D. KIRAN KUMAR, |
Volume 10,Issue 1,Year 2021 |
International Journal for Innovative Engineering and Management Research |
| 269 |
Enhancement of Power Quality by AI based Shunt Active DC Power Filter (SADPF) for Non Linear and Unbalanced Loads |
Kiran Yaddanapudi, Pannala Krishna Murthy, |
Volume 10,Issue 2,Year 2021 |
International Journal for Innovative Engineering and Management Research |
| 270 |
COOPERATIVE SENSING FOR COGNITIVE RADIOS USING ERLS ENERGY DETECTOR |
BOMMIDI SRIDHAR, T. SRINIVASULU , |
Volume 6,Issue 6,Year 2019 |
Journal of Critical Reviews |
| 271 |
IDENTIFYING THE QUALITY OF PRODUCT BASED ON CLASSIFICATION OF OPINIONS |
Naveen Kumar, N Sai Vinuthna.J, |
Volume 5,Issue 8,Year 2018 |
Global Journal of Engineering Science and Researches |
| 272 |
DETECTING LOCAL DENGUE CLUSTERS USING SATSCAN METHOD FOR DEPLOYMENT OF MEDICINES AND PREVENTIVE MEASURES IN GUNTUR DISTRICT, ANDHRA PRADESH |
CHINNAM YUVARAJU, IYYANKI V. MURALI KRISHNA, MURALI KRISHNA K.V.S.G, |
Volume 3,Issue 8,Year 2019 |
International Journal for Recent Development in Science and Technology |
| 273 |
STRUCTURE AND CREATION OF SMALLER AND USUAL TABLE SAW |
AMIT KUMAR SINGH, REJOY ABI CHERYAN, GAGANA TEJA GOUD, |
Volume 3,Issue 12,Year 2019 |
International Journal for Recent Development in Science and Technology |
| 274 |
FABRICATION OF MINI BELT CONVEYOR |
SHUBHAM AGGARWAL, FAIZ ALAM, NEHAL AHMAD, |
Volume 3,Issue 12,Year 2019 |
International Journal for Recent Development in Science and Technology |
| 275 |
ORDER OF INFLUENCE OF DENT GEOMETRY PARAMETERS ON ULTIMATE STRENGTH OF DENTED THIN SQUARE |
D. Peroumal , B.Prabu , A. Aruna Kumari, R. Ranjit Kumar, |
Volume 5,Issue 11,Year 2018 |
Global Journal of Engineering Science and Researches |
| 276 |
Study of Consumer Behaviour Towards In-store Factors of Customer Experience in Selected Departmental Apparel Stores in Major Metros |
M Annaji Sarma, M S Bhat , |
Volume 5,Issue 7,Year 2019 |
International Journal for Research in Engineering Application & Management |
| 277 |
Minimization of warpage on slender prismatic parts while milling of Aluminum 2014-T651 by experimental study of aging and stress relieving processes |
N.Vinaya Kumar, M.Indira Rani, |
Volume 5,Issue 3,Year 2019 |
International Journal for Research in Engineering Application & Management |
| 278 |
Minimization of Warpage on Slender Prismatic Parts while Milling of Aluminum 2014-T651 by Inducing Thermal stress |
N.Vinaya Kumar, M.Indira Rani, |
Volume 5,Issue 3,Year 2019 |
International Journal for Research in Engineering Application & Management |
| 279 |
Modeling and Performance Analysis of AC Plant Heat Exchanger |
V. Harika , K. Vasantha Kumar, |
Volume 7,Issue 9,Year 2021 |
International Journal for Modern Trends in Science and Technology |
| 280 |
Modeling and Fatigue Analysis of Robotic Arm with Lightweight Materials using FEA Technique |
K Kaleshwar Singh, K Vasantha Kumar, |
Volume 7,Issue 9,Year 2021 |
International Journal for Modern Trends in Science and Technology |
| 281 |
Modeling and Finite Element Analysis of Chain Drive using Different Materials |
G.Prasad , K Vasantha Kumar, |
Volume 7,Issue 9,Year 2021 |
International Journal for Modern Trends in Science and Technology |
| 282 |
Reliability Analysis of Dumpers through FMEA-TOPSIS Integration |
M. Pradeep Kumar, N. V. S. Raju , M. Navaneetha , |
Volume 7,Issue 9,Year 2021 |
International Journal for Modern Trends in Science and Technology |
| 283 |
A Study on Impact of Crypto Currencies on Select Global Currencies Volatility |
JAKKULA ROHIT KUMAR YADAV, |
Volume 4,Issue 11,Year 2019 |
International Journal for Research in Engineering Application & Management |
| 284 |
Experimental Investigations on Ci Engine Using Biodiesel With Fuel Additives |
V.Sivaramakrishna , A Siva Kumar , A. Aruna Kumari, |
Volume 4,Issue 10,Year 2019 |
International Journal for Research in Engineering Application & Management |
| 285 |
Analysis of Raft Consensus Algorithm |
T. Srajan , V. Indrani , D. Swaroopa , |
Volume 7,Issue 4,Year 2020 |
International Journal of Innovative Research in Engineering & Management |
| 286 |
Perceptions of Client and Server Side Load Balancing in Microservices |
V. Indrani , D. Swaroopa , D.Deepthisri , |
Volume 7,Issue 4,Year 2020 |
International Journal of Innovative Research in Engineering & Management |
| 287 |
Antihyperlipidemic activity of ethanolic extract of Macrotyloma uniflorum (Lam.) Verdc. leaves and stems on high-fat diet-induced hyperlipidemia |
Galanki Vasantha, A. Venkatesham , C. H. Dayakar , |
Volume 14,Issue 1,Year 2020 |
International Journal of Green Pharmacy |
| 288 |
The antidiabetic effect of leaf and stem extract of Crossandra infundibuliformis in alloxan-induced diabetic rats and diabetic nephropathy in male rats |
Galanki Vasantha, A. Venkatesham , C. H. Dayakar , |
Volume 14,Issue 1,Year 2020 |
International Journal of Green Pharmacy |
| 289 |
CLOUD BASED PRODUCTION ANALYSIS USING RFID |
L. Susmitha , K. Shyam , |
Volume 4,Issue 7,Year 2020 |
International Journal of Research Culture Society |
| 290 |
Active Learning Strategies In Engineering Education |
M.H Bindu Reddy, Pillalamarri Madhavi, |
Volume 4,Issue 6,Year 2020 |
International Journal of Research Culture Society |
| 291 |
Performance Evaluation of Indian Index Funds |
Sairaj Indroju, |
Volume 4,Issue 3,Year 2020 |
International Journal of Research Culture Society |
| 292 |
Formulation and Evaluation of Self‑emulsifying Drug Delivery System of Bosentan |
Sailaja Gunnam, Surya Prakasarao Kovvasu, Jithesh Karthan, Janjanam Kalyan Chakravarthy, |
Volume 12,Issue 2,Year 2018 |
Asian Journal of Pharmaceutics |
| 293 |
DEVELOPMENT OF A NEW VALIDATED STABILITY INDICATING RP-HPLC METHOD FOR THE DETERMINATION OF IRBESARTAN AND HYDROCHLOROTHIAZIDE |
Topalli Srinivasu, Mukthinuthalapati Mathrusri Annapurna, |
Volume 12,Issue 1,Year 2018 |
Asian Journal of Pharmaceutics |
| 294 |
Formulation and Evaluation of Bilayer Tablets of Ramipril as Immediate Layer and Propranolol Hydrochloride as Sustained Layer |
M. Sunitha Reddy, Guguloth Kumari, |
Volume 12,Issue 1,Year 2018 |
Asian Journal of Pharmaceutics |
| 295 |
Ultra Sonic Wave Propagation Properties of GFRP Hybrid Composite with Nano Fillers |
Mohd. Minhajuddin Saif, D.V. Ravi Shankar, M. Manzoor Hussain, |
Volume 2,Issue 11,Year 2018 |
International Journal of Research Culture Society |
| 296 |
SOLUBILITY ENHANCEMENT OF POORLY WATER SOLUBLE DRUG IRBESARTAN BY SELF EMULSIFYING DRUG DELIVERY SYSTEM |
D. Mounica , M. Sunitha Reddy, Mohammad Fazal Ul Haq, K. Anie Vijetha, |
Volume 8,Issue 1,Year 2019 |
World Journal of Pharmacy and Pharmaceutical Sciences |
| 297 |
EXTRACTION, INVITRO SCREENING AND PREPARATION OF TABLETS FROM DRAGON FRUIT PARTS |
E. Lakshmi , M. Sunitha Reddy, |
Volume 8,Issue 2,Year 2019 |
World Journal of Pharmacy and Pharmaceutical Sciences |
| 298 |
DEVELOPMENT OF GASTRO RETENTIVE MATRIX TABLETS OF ENALAPRIL MALEATE: IN VITRO EVALUATION ON FACTORS INFLUENCING DISSOLUTION RATES |
M. Sreenivasa Reddy, Mahendra Kumar C. B, Ramesh A , |
Volume 8,Issue 6,Year 2019 |
World Journal of Pharmacy and Pharmaceutical Sciences |
| 299 |
CHANG E DETECTION ANALYSIS IN URBAN WATERSHED USING GEOSPATIAL TECHNOLOGIES |
Shyama Mohan, M.V.S.S Giridhar , |
Volume 7,Issue 8,Year 2021 |
International Journal for Research in Engineering Application & Management |
| 300 |
Blockchain Proliferation in this Digital Epoch |
B.V.Satish Babu, K.Suresh Babu, |
Volume 9,Issue 10,Year 2020 |
International Journal for Innovative Engineering and Management Research |
| 301 |
A FACILE SYNTHESIS OF TRIAZOLOQUINAZOLINONE DERIVATIVES AS POTENTIAL Α-GLUCOSIDASE INHIBITORS |
Suresh Poudapally, Venkateshwarlu Gurram, Chiranjeevi Thulluri, Pavan Kumar Machiraju, Anji Karun Mutha, Subhabrata Sen, Vidya Katangoor, |
Volume 8,Issue 1,Year 2019 |
World Journal of Pharmaceutical Research |
| 302 |
A Survey on Cloud Forensics Frameworks |
Sheena Mohammed, R Sridevi , K.S Sadasiva Rao, |
Volume 5,Issue 11,Year 2021 |
International Journal of Research Culture Society |
| 303 |
A FACILE ONE-POT SYNTHESIS OF WEINREB AMIDES FROM CARBOXYLIC ACIDS WITH POCL3 |
Ravi Lakkakula, Arnab Roy, Khagga Mukkanti, Mendu Narender, |
Volume 8,Issue 4,Year 2019 |
World Journal of Pharmaceutical Research |
| 304 |
DETERMINATION OF MEROPENEM AND VABORBACTAM IN DRUG SUBSTANCE AND DRUG PRODUCT DOSAGE FORMS - A VALIDATED CHROMATOGRAPHIC METHOD BY RP-UPLC USING ANALYTICAL QBD PRINCIPLES |
Vishnu Priya M, P. Madhavan , Pramod Kumar, Manoj Kumar Metta, |
Volume 10,Issue 14,Year 2021 |
World Journal of Pharmaceutical Research |
| 305 |
ISOLATION, SCREENING AND CHARACTERIZATION OF CELLULOLYTIC BACTERIA FROM COTTON GINNING INDUSTRY EFFLUENT POLLUTED SOIL SAMPLES |
Kondakindi Venkateswar Reddy, Pillalamarri Ramu, Afreen Fathima, Pabbati Ranjit, |
Volume 10,Issue SPECIAL ISSUE 9,Year 2021 |
World Journal of Pharmaceutical Research |
| 306 |
β-CYCLODEXTRIN CATALYSED ONE-POT SYNTHESIS OF ARYL BENZOTHIAZOLES FROM DIMETHYLACETALS IN AQUEOUSPHASE |
Ravi Lakkakula, Arnab Roy, Khagga Mukkanti, Mendu Narender, |
Volume 8,Issue 7,Year 2019 |
World Journal of Pharmaceutical Research |
| 307 |
Analysis of 11kV/ 430 V 500 kVA Transformer Dissolved Gas using Pre-processing Techniques through Duval`s Triangle |
G V S S N Srirama Sarma, B.Ravindranath Reddy, Pradeep M Nirgude, P Vasudeva Naidu, |
Volume 14,Issue 39,Year 2021 |
Indian Journal of Science and Technology |
| 308 |
Mel Frequency Cepstral Coefficients based Bacterial Foraging Optimization with DNN-RBF for Speaker Recognition |
P S Subhashini Pedalanka, M SatyaSai Ram, Duggirala Sreenivasa Rao, |
Volume 14,Issue 41,Year 2021 |
Indian Journal of Science and Technology |
| 309 |
A Novel Outlier detection method for Time series data |
T Rajesh , K V G Rao , |
Volume 7,Issue 12,Year 2021 |
International Journal for Modern Trends in Science and Technology |
| 310 |
Optical Absorption Based Transducer Enabled Optical Fiber Refractive Index Sensor Operating at the Temperature Range of 10°C to 60°C |
S. Venkateswara Rao, S. Srinivasulu , |
Volume 7,Issue 9,Year 2020 |
European Journal of Molecular & Clinical Medicine |
| 311 |
Glass Probe Fiber Optic Extrinsic Sensor - Determination of Refractive Index of Binary Liquids at Different Temperature Levels Using Multimode Step-Index PCS Fibers |
S. Venkateswara Rao, S. Srinivasulu , |
Volume 9,Issue 1(1),Year 2019 |
International Journal of Management, IT & Engineering |
| 312 |
A Survey on Leaks and Faults Detection & Diagonsis in Water Supply System |
P. Vasanth sena, P.Sammulal , |
Volume 7,Issue 2,Year 2018 |
International Journal of Engineering, Science and Mathematics |
| 313 |
Incomplete information system to complete information system |
Bandaru Venkataramana, L Padmasree , M Srinivasa Rao, G Ganesan , |
Volume 5,Issue 12,Year 2021 |
International Journal of Research Culture Society |
| 314 |
Working Model of a Fiber Optic U - Shaped Glass Sensor to Measure the Refractive Index of Liquids at Various Temperatures |
S. Srinivasulu , S. Venkateswara Rao, |
Volume 8,Issue 8(1),Year 2018 |
International Journal of Management, IT & Engineering |
| 315 |
Air Pollution: A Case Study of Asthma Children and Adults in the Urban Zones |
IYYANKI V. MURALI KRISHNA, Prisilla Jayanthi, Aruna M , |
Volume 4,Issue 11,Year 2018 |
EPH - International Journal of Medical and Health Science |
| 316 |
FORMULATION AND OPTIMISATION OF SELF MICROEMULSIFYING MOUTH DISSOLVING FILM OF ARIPIPRAZOLE |
Pepakayala Praveena, K. Anie Vijetha, K. Satyendhar Kumar, |
Volume 11,Issue 2,Year 2022 |
World Journal of Pharmacy and Pharmaceutical Sciences |
| 317 |
FORMULATION AND EVALUATION OF EZETIMIBE LOADED SOLID LIPID NANOPARTICLES |
Chandraprakash Chilukuri, S. Muhammad Fazal Ul Haq, |
Volume 11,Issue 2,Year 2022 |
World Journal of Pharmacy and Pharmaceutical Sciences |
| 318 |
FORMULATIONS OF TRANSDERMAL PATCHES OF FLUCONAZOLE |
M. Sunitha Reddy, Asha Engle, |
Volume 11,Issue 1,Year 2022 |
World Journal of Pharmacy and Pharmaceutical Sciences |
| 319 |
FORMULATION AND EVALUATION OF DARUNAVIR LOADED SOLID LIPID NANOPARTICLES |
Dinesh Kumar Sandirigiri, K. Anie Vijetha, |
Volume 11,Issue 3,Year 2022 |
World Journal of Pharmacy and Pharmaceutical Sciences |
| 320 |
MULTIPLE LINEAR REGRESSION MODEL TO PREDICT THE WATER QUALITY PARAMETERS OF MUSI RIVER NEAR HYDERABAD, INDIA |
Shivarajappa , Mohammed Hussain, L. Surinaidu , |
Volume 13,Issue 3,Year 2022 |
International Journal of Civil Engineering and Technology |
| 321 |
Effect of elevated temperature on strength and durability properties of concrete using nano-silica and alccofine |
K Ashwini , P Srinivasa Rao, |
Volume 8,Issue 1,Year 2022 |
Journal of Research on Engineering Structures and Materials |
| 322 |
PREDICTION MODELS OF GROUNDWATER QUALITY PARAMETERS IN AN IRRIGATED AREA WITH WASTEWATER NEAR HYDERABAD, INDIA |
Shivarajappa , Mohammed Hussain, L. Surinaidu , |
Volume 13,Issue 3,Year 2022 |
International Journal of Advanced Research in Engineering and Technology |
| 323 |
Phytochemicals and Their Antimicrobial Activity: An Update on Their Mode of Action |
Sravanthi Pammi S. S, Archana Giri, |
Volume 5,Issue 1,Year 2021 |
International Journal of Clinical and Experimental Medicine Research |
| 324 |
Enhanced Production of Therapeutically Valuable Withaferin A From In Vitro Propagated Withania Somnifera (L.) Dunal |
Sukanya MS , Archana Giri, |
Volume 7,Issue 1,Year 2020 |
International Journal of Scientific Research in Biological Sciences |
| 325 |
Calculation of Texture Features for Polluted Leaves |
S.K. Badugu , R.K. Kontham , V.K. Vakulabharanam , B. Prajna , |
Volume 6,Issue 1,Year 2018 |
International Journal of Scientific Research in Computer Science and Engineering |
| 326 |
A Novel Hybrid Symmetric Key Encryption Algorithm for Telugu Script |
T. Madhavi Kumari, A. Vinaya Babu, |
Volume 9,Issue 6,Year 2021 |
International Journal of Computer Sciences and Engineering |
| 327 |
Influence of Process Parameters on Kerf In Abrasive Jet Drilling of Glass |
K. Gayatri , M. Suneetha , D.V. Srikanth , M. Srinivasa Rao, |
Volume 6,Issue 1,Year 2020 |
International Journal of Scientific Research In Multidisciplinary Studies |
| 328 |
Approach of Taguchi, RSM &ANOVA Using Stat Graphics on Machining of Ceramics with Abrasive Jet Drilling |
D.V. Srikanth , M. Srinivasa Rao, P. Rajamani , K. Sunitha , |
Volume 6,Issue 1,Year 2020 |
International Journal of Scientific Research In Multidisciplinary Studies |
| 329 |
Chronotherapeutic Press-Coated Tablets of Tramadol Hydrochloride: In Vivo Evaluation |
Ramya Krishna Talakoti, Suresh Bandari, A. Jaswanth , |
Volume 16,Issue 1,Year 2022 |
Asian Journal of Pharmaceutics |
| 330 |
PREPARATION AND EVALUATION OF NANOSPONGES BASED TRAMADOL HCL C/R TABLETS USING DESIGN OF EXPERIMENT |
Duggi Vamshidhar Reddy, Ambati Sambashiva Rao, |
Volume 14,Issue 3,Year 2022 |
International Journal of Applied Pharmaceutics |
| 331 |
CHROMATOGRAPHIC METHOD DEVELOPMENT AND VALIDATION STABILITY-INDICATING THREE IMPURITIES AND ITS DEGRADATION PRODUCTS IN TOLVAPTAN 15/30MG TABLETS |
M. Naresh Chandra Reddy, K. B. Chandra Sekhar, A. Kavitha , |
Volume 11,Issue 5,Year 2022 |
World Journal of Pharmaceutical Research |
| 332 |
THE AFFECT OF PANDEMIC ON GROWTH AND SUSTAINABILITY OF ENTREPRENEURSHIP (A CASE STUDY OF HYDERABAD DISTRICT) |
Nikhat Sultana, |
Volume 13,Issue 5,Year 2022 |
International Journal of Management |
| 333 |
METHOD DEVELOPMENT AND VALIDATION OF RP-HPLC METHOD FOR SIMULTANEOUS ESTIMATION OF REMOGLIFLOZIN AND VILDAGLIPTIN IN API DOSAGE FORM |
M. Satish Kumar, Pavan Kumar, |
Volume 9,Issue 4,Year 2022 |
European Journal of Biomedical and Pharmaceutical Sciences |
| 334 |
NOVEL METHOD OF DEVELOPMENT AND SYNCHRONIZED VALIDATION OF SATRANIDAZOLE AND OFLOXACIN IN COMBINED DOSAGE FORM ASSISTED BY RP-HPLC |
Tribhuvan Singh, Mihir Y Parmar, Jogu Chandrudu, J Dinesh Babu, Chidirala Suresh, |
Volume 6,Issue 2,Year 2019 |
European Journal of Pharmaceutical and Medical Research |
| 335 |
EVALUATION OF DIFFERENT SYNTHETIC AND NATURAL POLYMERS AS PROTECTIVE LAYER ON HIGHLY SOLUBLE AND HIGH DOSE DRUG METOPROLOL SUCCINATEFOR MANUFACTURING OF CONTROL RELEASE MULTI UNIT PELLETS TABLETS |
Syam Prasad Borra, M. Chenna Eswaraiah, G. Kamalakar Reddy, |
Volume 10,Issue 3,Year 2018 |
International Journal of Applied Pharmaceutics |
| 336 |
A NOVEL APPROACH OF LOCUST BEAN GUM MICROSPHERES FOR COLONIC DELIVERY OF MESALAMINE |
V. N. L. SIRISHA , M. Chinna Eswariah, A. Sambasiva Rao, |
Volume 10,Issue 1,Year 2018 |
Clio. Journal of History, Human Sciences and Critical Thinking |
| 337 |
PREPARATION, EVALUATION AND STABILITY OF LAMIVUDINE LOADED ALGINATETAMARIND MUCILAGE MICROSPHERES |
Santosh Gada, Anandkumar Y , C. Mallikarjuna Setty, |
Volume 11,Issue 4,Year 2019 |
International Journal of Applied Pharmaceutics |
| 338 |
THE IMPACT OF PEOPLE MOVEMENT ON THE THROUGHPUT OF WI-FI NETWORKS AND THE SIGNIFICANT CHANGES THAT AFFECT WLAN PERFORMANCE BY NO CLUSTERING OR GROUPING &WITH CLUSTERING & MOBISIM V3 SOFTWARE TO MODEL THE J N T UNIVERSITY HYDERABAD INDIA |
Kamakshi Prasad Valurouthu, Seyed Amin Ahmadi Olounabadi, Avula Damodaram, |
Volume 5,Issue 1,Year 2019 |
World Journal of Engineering Research and Technology |
| 339 |
MECHANICAL PROPERTIES OF SIC AL2O3 FILLED GLASS EPOXY COMPOSITES |
Venkata Kasi Viswanadham Kolipakula, ACS Kumar , Ravinder Reddy Pinninti, |
Volume 13,Issue 6,Year 2022 |
International Journal of Mechanical Engineering and Technology |
| 340 |
ACUTE ORAL TOXICITY STUDY OF ETHANOLIC EXTRACT OF CROTALARIA SPECIOSA IN WISTAR RATS |
O. Umamaheswar Rao, M. Chinna Eswaraiah, M. C. Prabhakar , |
Volume 5,Issue 8,Year 2018 |
European Journal of Pharmaceutical and Medical Research |
| 341 |
PARAMETRIC ANALYSIS OF SURFACE FINISH IN BURNISHING AND SHOT PEENING PROCESS |
Kundan Kumar D, K. Eshwara Prasad, |
Volume 4,Issue 2,Year 2018 |
World Journal of Engineering Research and Technology |
| 342 |
A REVIEW ON SELF EMULSIFYING DRUG DELIVERY SYSTEM |
M. Sunitha Reddy, Pallavi Dongre, |
Volume 7,Issue 3,Year 2020 |
European Journal of Biomedical and Pharmaceutical Sciences |
| 343 |
MACHINABILITY OF SiC AND AL2O3 PARTICLES FILLED SHORT GLASS FIBER REINFORCED EPOXY BASED COMPOSITES BY TURNING |
Venkata Kasi Viswanadham Kolipakula, Chandra Sekhara Kumar Aduru, Ravinder Reddy Pinninti, |
Volume 13,Issue 1,Year 2022 |
International Journal of Production Technology and Management |
| 344 |
TRIBOLOGICAL PERFORMANCE ANALYSIS OF HYBRID AL6061/SI3N4/SSP/RHA COMPOSITE USING TAGUCHI APPROACH |
Ravi Kumar Nagula, K. Vijaya Kumar Reddy, |
Volume 11,Issue 9,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 345 |
STUDY THE IMPACT OF THE LATERAL DEFLECTION OF THE HIGH RISE BUILDING DUE TO LATERAL LOADS IN CONCRETE FRAME STRUCTURES WITH RC SHEAR WALL |
Mahdi Hosseini, |
Volume 4,Issue 5,Year 2018 |
World Journal of Engineering Research and Technology |
| 346 |
A BRIEF REVIEW OF SYNTHESIS AND APPLICATIONS OF INDIVIDUAL COUMARIN, THIAZOLE SCAFFOLDS AS WELL AS COUMARIN-THIAZOLE HYBRID COMPOUNDS IN THE FIELD OF SCIENCE AND TECHNOLOGY |
Kotthireddy Kavitha, Devulapally Srikrishna, Pramod Kumar Dubey, Pasula Aparna, |
Volume 2,Issue 5,Year 2018 |
International Journal of Modern Pharmaceutical Research |
| 347 |
ENHANCEMENT OF WELDING PROCESS FOR A FIXTURE DESIGN USING SIX SIGMA PROCESS - A CASE STUDY |
M.Indira Rani, Baloji Badavath, |
Volume 8,Issue 9,Year 2019 |
International Journal for Innovative Engineering and Management Research |
| 348 |
REVIEW ON MMC FSW JOINTS WITH THE PARTICULATE (AL MATRIX WITH SIC) REINFORCEMENT |
T. Madhavi , D. Ravi Shankar, K. Prasanna Lakshmi, |
Volume 13,Issue 10,Year 2022 |
International Journal of Mechanical Engineering and Technology |
| 349 |
MODELING AND TOPOLOGICAL OPTIMIZATION OF EXISTING AUTOMOBILE BRAKE PEDAL |
SRV Narsaiah S , Ch. Sridhar Reddy, |
Volume 2,Issue 1,Year 2022 |
International Journal of Automobile Engineering |
| 350 |
STRUCTURAL OPTIMIZATION USING GRADIENT AND EVOLUTIONARY ALGORITHMS |
SRV Narsaiah S , Ch. Sridhar Reddy, |
Volume 13,Issue 11,Year 2022 |
International Journal of Mechanical Engineering and Technology |
| 351 |
AN INTELLIGENT FRAMEWORK BASED ON THE INTEGRATION OF GRA, FUZZY LOGIC, AND TAGUCHI`S APPROACHES FOR MULTI-RESPONSE OPTIMIZATION OF WIRE-EDT PROCESS PARAMETERS |
Baki Naresh, A. Chennakesava Reddy, |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 352 |
CYCLIC GAN AS TOOL FOR GENERATING SYNTHETIC MICROSTRUCTURAL DATA OF AL-SiC METAL MATRIX COMPOSITE |
D.V. Ravi Shankar, T. Madhavi , K. Prasanna Lakshmi, |
Volume 14,Issue 2,Year 2023 |
International Journal of Mechanical Engineering and Technology |
| 353 |
OPTIMAL PRESSURE CONTROL AND PUMP SPEED OPTIMIZATION FOR COMPLEX WATER NETWORKS. A CASE STUDY: KAPRA MUNICIPALITY |
B. Rajasekhar , G.K. Viswanadh , G. Venkata Ramana, |
Volume 10,Issue 10,Year 2019 |
International Journal of Civil Engineering and Technology |
| 354 |
LOCALIZATION OF PIPELINE BURSTS THROUGH PRESSURE TRANSIENT ANALYSIS FOR ENHANCED DETECTION |
B. Rajasekhar , G. Venkata Ramana, G.K. Viswanadh , |
Volume 11,Issue 11,Year 2020 |
International Journal of Civil Engineering and Technology |
| 355 |
UTILIZING PATTERN SEQUENCE - BASED FORECASTING ALGORITHM AND SOFT COMPUTING METHODS FOR EFFICIENTLY MANAGING WATER NETWORK LEAKAGE WITH A HYBRID APPROACH |
B. Rajasekhar , G. Venkata Ramana, G.K. Viswanadh , |
Volume 10,Issue 12,Year 2019 |
International Journal of Civil Engineering and Technology |
| 356 |
PV FED THREE PHASE MULTI LEVEL QUASI Z SOURCE INVERTER USING SPACE-VECTOR MODULATION |
V. Rohith Chandra, K. Naga Sujatha, |
Volume 14,Issue 5,Year 2023 |
International Journal of Electrical Engineering and Technology |
| 357 |
OPTIMISATION OF FRICTION SPECTRAL PROCESS PARAMETERS ON AA8011 REINFORCED WITH TITANIUM DIOXIDE (TIB2) AND ZIRCONIUM OXIDE (ZRO2). METAL HYBRID MATRIX |
M. Siva Reddy, P.Prasanna , |
Volume 15,Issue 2,Year 2024 |
International Journal of Mechanical Engineering and Technology |
| 358 |
INVESTIGATION OF SURFACE ROUGHNESS IN MILLING OF AA8011 USING SOLID CARBIDE END MILL TOOL |
M. Siva Reddy, P.Prasanna , |
Volume 15,Issue 1,Year 2024 |
International Journal of Design and Manufacturing Technology |
| 359 |
TRIBOLOGICAL CHARACTERIZATION AND OPTIMISATION OF AA8011 ALUMINIUMALLOY REINFORCED WITH ZIRCONIUM OXIDE AND TITANIUM BORIDE |
M. Siva Reddy, Prasanna Prattipati, Rachuri Vijay Kumar, |
Volume 2,Issue 1,Year 2024 |
INTERNATIONAL JOURNAL OF MANUFACTURING, MATERIALS, AND MECHANICAL ENGINEERING |
| 360 |
THE SOCIETAL NEXUS OF SOFTWARE ENGINEERING AND ARCHITECTURE: A MULTIDIMENSIONAL ANALYSIS OF IMPACTS AND IMPLICATIONS |
Karthik Akinepalli, |
Volume 7,Issue 2,Year 2024 |
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND INFORMATION TECHNOLOGY |
| 361 |
OPTIMIZED NETWORK ERROR LOGGING FOR IOS: ENHANCING USER EXPERIENCE AND APP STABILITY VIA PROTOCOL AGNOSTICISM AND SERVER-SIDE POLICIES |
Waseem Syed, Nagarajan Madhavan, |
Volume 7,Issue 2,Year 2024 |
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND INFORMATION TECHNOLOGY |
| 362 |
BUILDING RESILIENT HEALTHCARE ANALYTICS INFRASTRUCTURE: A FRAMEWORK FOR SCALABILITY` HIGH AVAILABILITY` AND DISASTER RECOVERY |
Abrar Ahmed Syed, |
Volume 16,Issue 1,Year 2025 |
International Journal of Computer Engineering and Technology |
| 363 |
AI-DRIVEN RISK STRATIFICATION IN HEALTHCARE: ADVANCING EARLY DETECTION AND PATIENT OUTCOME OPTIMIZATION |
Abrar Ahmed Syed, |
Volume 8,Issue 1,Year 2025 |
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND INFORMATION TECHNOLOGY |
| 364 |
ADVANCES IN DATA AND AI GOVERNANCE: NAVIGATING PRIVACY` COMPLIANCE` AND TRUST |
Sreeram Reddy Thoom, |
Volume 16,Issue 1,Year 2025 |
International Journal of Computer Engineering and Technology |
| 365 |
ADVANCES IN MULTICLOUD DATA GOVERNANCE AND SECURITY: BUILDING ROBUST CROSS-PLATFORM DATA ECOSYSTEMS |
Sreeram Reddy Thoom, |
Volume 8,Issue 1,Year 2025 |
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND INFORMATION TECHNOLOGY |
| 366 |
AI AND MACHINE LEARNING IN NETWORK SECURITY: CURRENT LANDSCAPE AND FUTURE HORIZONS |
Sasank Tummalpalli, |
Volume 16,Issue 1,Year 2025 |
International Journal of Computer Engineering and Technology |
| 367 |
SELF-HEALING NETWORK INFRASTRUCTURE: THE FUTURE OF AUTONOMOUS NETWORK MANAGEMENT |
Sasank Tummalpalli, |
Volume 8,Issue 1,Year 2025 |
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND INFORMATION TECHNOLOGY |
| 368 |
HARNESSING AI: ENHANCING SENSITIVE INFORMATION DETECTION IN CI/CD PIPELINES FOR SECURE SOFTWARE DEVELOPMENT |
Waseem Syed, |
Volume 16,Issue 1,Year 2025 |
International Journal of Computer Engineering and Technology |
| 369 |
ENHANCED OBSERVABILITY OF CLOUDNATIVE APPLICATIONS IN DATA ANALYTICS ARCHITECTURES |
AbhilasH Nagilla, |
Volume 8,Issue 1,Year 2025 |
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND INFORMATION TECHNOLOGY |
| 370 |
ENHANCING DATA ANALYTICS WITH RETRIEVAL-AUGMENTED GENERATION WORKLOADS |
AbhilasH Nagilla, |
Volume 16,Issue 1,Year 2025 |
International Journal of Computer Engineering and Technology |
