1 |
INFLUENCE OF NANO PARTICLES IN CONCRETE - A REVIEW |
Kunchala Ashok, B. Sarath Chandra Kumar, |
Volume 11,Issue 6,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
2 |
A CRITICAL REVIEW OF EXPERIMENTAL STUDIES ON STRENGTH AND DURABILITY PROPERTIES OF CONCRETE INCORPORATING MINERAL ADMIXTURES AND FIBRES |
Puvvada Veerendra, B. Sarath Chandra Kumar, |
Volume 11,Issue 6,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
3 |
TOXIC GAS DETECTION AND MONITORING UTILIZING INTERNET OF THINGS |
Chalasani srinivas, Mohan Kumar. Ch , |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
4 |
TALENT TURN OUT WITH SPECIAL REFERENCE TO CIVIL ENGINEERS PERSPECTIVE - A LITERATURE REVIEW |
B. Ravinder , A. B. Saraswathi , |
Volume 11,Issue 5,Year 2020 |
International Journal of Management |
5 |
RADIATION AND CHEMICAL REACTION EFFECTS ON MHD CASSON FLUID FLOW OF A POROUS MEDIUM WITH SUCTION/INJECTION |
Nagaraju Vellanki, K. Hemalatha , G. Venkata Ramana Reddy, |
Volume 11,Issue 2,Year 2020 |
International Journal of Mechanical Engineering and Technology |
6 |
AN INTEGRATED ANALYTICAL ANALYSIS FOR EVALUATION OF MATERIAL RESOURCES MANAGEMENT IN CONSTRUCTION INDUSTRY - A MODEL STUDY |
D. Prasanna Kumar, A. Satish , SS. Asadi , |
Volume 9,Issue 2,Year 2018 |
International Journal of Civil Engineering and Technology |
7 |
AN ANALYTICAL APPROACH FOR EVALUATION OF LAND RESOURCES MANAGEMENT IN CONSTRUCTION INDUSTRY - A MODEL STUDY |
D. Prasanna Kumar, A. Satish , SS. Asadi , |
Volume 9,Issue 2,Year 2018 |
International Journal of Civil Engineering and Technology |
8 |
AN ANALYTICAL APPROACH FOR EVALUATION OF RESOURCES MANAGEMENT IN CONSTRUCTION INDUSTRY: A MODEL STUDY |
SS. Asadi , M. Venkata Sravan Kumar Reddy, |
Volume 9,Issue 2,Year 2018 |
International Journal of Civil Engineering and Technology |
9 |
CIVIL ENGINEERING APPROACH ON THE CLASSIFICATION ALGORITHMS WITH THE COMPARISON PERSPECTIVE |
U. Vignesh , S. Charishma , K. Jayadeep , |
Volume 9,Issue 2,Year 2018 |
International Journal of Civil Engineering and Technology |
10 |
ROLE OF A LEADER IN STRATEGIC TALENT MANAGEMENT -A STUDY IN TECH- MAHINDRA |
K.S.Sekhar Rao, Ch. Sahyaja , Bhanu Prakash Reddy. G, Aditya Chakravarthy, |
Volume 9,Issue 2,Year 2018 |
International Journal of Civil Engineering and Technology |
11 |
A PILOT STUDY ON IMPACT OF SOCIO CULTURAL FACTORS ON ENTREPRENEURIAL SUCCESS |
Syamala Devi Bhoganadam, D. SrinivasaRao , N. Konda Reddy, |
Volume 9,Issue 2,Year 2018 |
International Journal of Civil Engineering and Technology |
12 |
ANALYZING FAMILY-OWNED SME`S & STUDY THE FACTORS INFLUENCING THEM |
Bhargav Ram Munagapati, Srinivasa Rao D, |
Volume 9,Issue 2,Year 2018 |
International Journal of Civil Engineering and Technology |
13 |
EXPERIMENTAL INVESTIGATION ON PERFORMANCE OF A COMPRESSION IGNITION ENGINE FUELLED WITH LINSEED (FLAX) METHYL ESTERS |
K. Srinivasa Reddy, MD. Kalamulla , P. Sai Kishore, V. shanmukhpavan , Sai Krishna, |
Volume 10,Issue 1,Year 2019 |
International Journal of Mechanical Engineering and Technology |
14 |
AN INTEGRATED APPROACH TO A CRITICAL ANALYSIS OF RISK MANAGEMENT IN CONSTRUCTION PROJECTS |
SS. Asadi , Vallabhaneni Eswara Rao, |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
15 |
GENERATING FUNCTIONS FOR HYPERGEOMETRIC POLYNOMIALS OF TWO VARIABLES Rn( β; γ; x, y) USING WEISNER GROUP- THEORETIC METHOD |
Tadikonda Srinivasulu, V. S. Bhagavan , |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
16 |
IDEAL THEORY IN A-TERNARY SEMIGROUPS |
Seetha Mani P, Sarala Y , Jaya Lalitha G, Anjaneyulu A , |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
17 |
STUDY AND ANALYSIS ON EARNED VALUE MANAGEMENT SYSTEM IN CONSTRUCTION INDUSTRY |
M.Sharun , P. Sundara Kumar, |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
18 |
A STUDY ON INVESTORS AWARENESS TOWARDS MUTUAL FUNDS INVESTMENT |
Vedala Naga Sailaja, |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
19 |
AN EMPIRICAL STUDY ON IMPACT OF MACRO VARIABLES ON SECTORAL INDICES IN INDIA |
V.N.Sailaja , Chandini Mandal, |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
20 |
MHD SLIP FLOW OF CASSON FLUID OVER AN EXPONENTIALLY STRETCHING INCLINED PERMEABLE SHEET WITH SORET-DUFOUR EFFECTS |
K.V.Chandra Sekhar, V. Manjula , |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
21 |
A STUDY ON ROLE OF EMOTIONAL INTELLIGENCE ON EMPLOYEE PERFORMANCE |
K.N.Lakshmi , K.S.Sekhar Rao, |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
22 |
AN ANALYTICAL APPROACH FOR ASSESSING THE CONSTRUCTION AND DEMOLITION WASTE IN CONSTRUCTION INDUSTRY BY USING STANDARD PRACTICES |
Y.Sreekanth Reddy, K. Mahindra , SS. Asadi , |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
23 |
EXPERIMENTAL INVESTIGATION OF SELF COMPACTING CONCRETE (SCC) WITH CONFINEMENT BY PARTIAL REPLACEMENT OF CEMENT WITH GGBS, LIME STONE AND FINE AGGREGATE WITH POND ASH |
CH. Rajesh , C. Rajamallu , SS. Asadi , |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
24 |
AN EMPIRICAL STUDY ON CONSUMER GREEN BUYING BEHAVIOUR, VIJAYAWADA, ANDHRA PRADESH |
B. Kishore Babu, N. Rajeswari , Naidu Mounika, |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
25 |
FINANCIAL PERFORMANCE OF BSE PSU INDEX - A TIMES SERIES DATA ANALYSIS |
Jakeer Hussain Shaik, Danda Gopi, Mandava Murali, |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
26 |
CLINICAL PARSER USING PROBABILISTIC CONTEXT FREE GRAMMAR: A INTRODUCTION |
A. Senthil , Anjali Kedawat, |
Volume 11,Issue 8,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
27 |
EXAMINING THE VALIDITY OF FAMA FRENCH 3 FACTOR MODEL IN INDIAN STOCK MARKETS -AN EMPIRICAL ANALYSIS |
S. Durga , |
Volume 11,Issue 8,Year 2020 |
International Journal of Management |
28 |
EVALUATION OF REDUCING WASTE MATERIALS IN CONSTRUCTION PROJECTS USING RANKING ANALYSIS |
B. Sayed , Kone Venkatesh, SS. Asadi , |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
29 |
STUDY OF PORE STRUCTURE OF SILICA FUME CONCRETE FOR OPTIMUM REPLACEMENT |
A. Joe Paulson, A. Melchizedek , R. Angeline Prabhavathy, |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
30 |
ROLE OF EFFECTIVE LEADERSHIP ON PERFORMANCE MANAGEMENT SYSTEM-A STUDY IN BANKING SECTOR IN KRISHNA DISTRICT |
K. Suma Priya, I. Bala Mohana Krishna, Ch. Sahyaja , K.S. Sekhara Rao, |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
31 |
YIELD OF CONCRETE WITH MINERAL ADMIXTURE |
Shruthi. A , Prince Arulraj. G, Jayalin.D , |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
32 |
PREPARATION OF LAND USE/LAND COVER MAP FOR EFFECTIVE MANAGEMENT OF ENVIRONMENTAL CONDITIONS IN MINING AREA: A MODEL STUDY |
SS. Asadi , M.Jaya Sravani, P.Praveena , |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
33 |
APPLICATION OF SAFETY AND RISK MANAGEMENT TECHNIQUES IN CONSTRUCTION USING ANALYTIC HIERARCHY PROCESS (AHP) - A CASE STUDY |
D. Teja Swaroop, D. Satish Chandra, SS. Asadi , |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
34 |
EFFECT OF NANO-CEMENT IN REDUCING THE VALUE OF ROUGHNESS COEFFICIENT |
Estherrani V , Muthukumaran N , Prince Arulraj. G, |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
35 |
STUDIES ON THE PROPERTIES OF SUSTAINABLE LIGHT WEIGHT PERVIOUS CONCRETE USING PALMYRA PALM SHELLS |
K. Rohith Kumar, R. Mercy Shanthi, |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
36 |
A CRITICAL ANALYSIS OF MATERIAL MANAGEMENT TECHNIQUES IN CONSTRUCTION PROJECT |
B. Madhavarao , K. Mahindra , SS. Asadi , |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
37 |
OPTIMIZATION OF PLANNING, SCHEDULING, AND CONTROL OF HIGH RISE CONSTRUCTION PROJECTS |
S.M.B.Jaswanth , P. Sundara Kumar, |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
38 |
A STUDY ON IMPACT OF HUMAN RESOURCE PRACTICES ON EMPLOYEE RETENTION IN HOTEL INDUSTRY |
Kiran Mayi Immaneni, Vedala Naga Sailaja, |
Volume 11,Issue 8,Year 2020 |
International Journal of Management |
39 |
EVALUATION OF VARIATIONS IN QUALITY OF WATER IN DISTRIBUTION NETWORKS USING EPANET |
M.S.D. Hima Bindu, K.Rajasekhara Reddy, G.V.K.S.V. Prasad , |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
40 |
DEFLUORIDATION USING EGG SHELLS AND RICE HUSK: KINETICS AND EQUILIBRIUM STUDIES |
E Vasavi , V Sree Lakshmi, |
Volume 10,Issue 5,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
41 |
INTEGRATED DESIGN OFINTELLIGENT TRAFFIC SIGNAL CONTROLLING SYSTEM FOR EFFECTIVE TRAFFIC MONITORING |
P Lohit , G Vivek , D.Satish Chandra, SS. Asadi , |
Volume 9,Issue 4,Year 2018 |
International Journal of Civil Engineering and Technology |
42 |
TIME CONSERVING SECURED CLOUD DATA STORAGE SOLUTION BASED ON KECCAK AND ELLIPTIC CURVE CRYPTOGRAPHY |
B. Jyoshna , K. Subramanyam , |
Volume 10,Issue 5,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
43 |
DAM BREAK ANALYSIS OF KALYANI DAM USING HEC-RAS |
B .Balaji , Sanjeet Kumar, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
44 |
INFLUENCE OF NOTCH DEPTH AND ITS LOCATION ON FLEXURAL PROPERTIES FOR AN HYBRID COMPOSITE |
Eswara Kumar. A, M.V.Abhilash , A.L.N. Sai Kumar, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
45 |
WASTE PLASTIC UTILIZATION IN BUTUMINOUS MIX FOR REPLACEMENT OF BINDER - A MODEL STUDY |
E.Rohit Sai, K.Venkata Ratnavali, D.Satish Chandra, SS. Asadi , |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
46 |
SLIP EFFECTS ON CONVECTIVE FLOW BETWEEN ROTATING STRETCHABLE DISKS IN ANISOTROPIC POROUS MEDIUM WITH CATTANEO-CHRISTOV HEAT FLUX MODEL |
K. Gowthami , Hari Prasad P, Mallikarjuna. B , |
Volume 10,Issue 10,Year 2019 |
International Journal of Mechanical Engineering and Technology |
47 |
EFFECT OF FLY ASH AND RICE HUSK ASH ON MODULUS OF ELASTICITY OF CONCRETE |
T.Sricharan , I. Siva Sai Pavan Kumar, P.Poluraju , |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
48 |
AN ANALYTICAL APPROACH FOR IDENTIFICATION OF UNCERTAINTITES AND PRIORTIZING THE FACTORS CAUSING UNCERTAINITIES IN CONSTRUCTION INDUSTRY USING RELATIVE IMPORTANCE INDEX (RII) |
T. Ganesh Anurag, D.Satish Chandra, SS. Asadi , |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
49 |
RADIATION AND CHEMICAL REACTION EFFECTS ON THE BOUNDARY LAYER MHD CASSON FLUID ON A VERTICAL PLATE EMBEDDED IN THE POROUS MEDIUM |
Y Hari Krishna, P Bindu , N Vijaya , G V Ramana Reddy, |
Volume 10,Issue 11,Year 2019 |
International Journal of Mechanical Engineering and Technology |
50 |
APPLICATION OF TAGUCHI METHOD IN THE OPTIMIZATION OF SWIMMING CAPABILITY FOR ROBOTIC FISH |
P. Ratna Prasad, A. Srinath , |
Volume 10,Issue 11,Year 2019 |
International Journal of Mechanical Engineering and Technology |
51 |
MICRO CONTROLLER BASED POST HARVESTING ROBOT |
Y. . Kalyan Chakravarthy, A. Srinath, P. Ratna Prasad, K. Prabhu Krishna, K. Chandu Nagadhar, K. Raj Kumar, |
Volume 10,Issue 11,Year 2019 |
International Journal of Mechanical Engineering and Technology |
52 |
MODELLING AND PARAMETRIC ANALYSIS IN PRODUCTION OF NANOSTRUCTURE STAINLESS STEEL POWDER USING MODIFIED TAGUCHI TECHNIQUE |
T. Vijaya Kumar, K. Sai Sarath, Md. Abid Ali, |
Volume 10,Issue 11,Year 2019 |
International Journal of Mechanical Engineering and Technology |
53 |
STATE OF THE ART ON MECHANICAL PROPERTIES OF ADDITIVELY MANUFACTURED LATTICE STRUCTURES |
Kiran Kumar Dama, P Imran Khan, K V Dheeraj , Sk Jani Basha, G Mahesh , |
Volume 10,Issue 4,Year 2019 |
International Journal of Mechanical Engineering and Technology |
54 |
IMPLEMENTATION OF TECHNOLOGY BASED PERFORMANCE MANAGEMENT SYSTEM AND IT` S IMPACT ON ORGANIZATIONAL EFFECTIVENESS |
Sundari Dadhabai, B.Sai Krishna Karthik, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
55 |
COMPARATIVE STUDY ON VARIATION OF PHYSIO-CHEMICAL PARAMETERS OF EFFLUENTS FROM VARIOUS INDUSTRIAL AND RESIDENTIAL ZONES |
N. Sree Navya, SS. Asadi , |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
56 |
PLANNING AND ESTIMATION OF A PEDESTRIAN SUBWAY SYSTEM |
Nagalla Vasishta, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
57 |
A STATISTICAL APPROACH FOR RANKING OF FACTORS IMPACTING THE TIMELINE OF RESIDENTIAL CONSTRUCTION PROJECTS USING IMPORTANT INDEX METHOD (IMPI) |
A. R. S.Sri Susmitha, K. Hemantha Raja, SS. Asadi , |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
58 |
DURABILITY STUDIES OF GGBS AND METAKAOLIN BASED GEOPOLYMER CONCRETE |
B. Sarath Chandra Kumar, K. Ramesh , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
59 |
EVALUATION OF ENTREPRENEURS CHALLENGES IN CONSTRUCTION INDUSTRY - A MODEL STUDY USING RISK- BASED APPROACH |
M. Mahanth , V. Sreelakshmi , SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
60 |
PUSHOVER ANALYSIS ON REINFORCED CONCRETE FRAMED MULTILEVEL CAR PARKING BUILDING USING ETABS |
K. Naga Sai Sravya, P. Polu Raju, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
61 |
A CRITICAL EVALUATION ON POZZOLONIC PROPERTIES OF SELECTED MATERIALS AND THEIR REPLACEMENT IN CEMENT |
SS. Asadi , M.V. Raju , B.Harish kumar, P. Aswin Prakash, Dheeraj Mehta, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
62 |
EXPERIMENTAL STUDY ON COLUMN MOULD STRENGTH WITH SELF COMPACTING AND SELF CURING CONCRETE |
Sreeram Seshank, Rakesh Kumar Reddy, Jagadish Kumar, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
63 |
A MODEL STUDY ON COMPARATIVE COST ANALYSIS OF EQUIPMENT MANAGEMENT IN CONSTRUCTION COMPANIES IN TIRUPATI REGION |
Saikumar Tenepalli, SS. Asadi , K. Sai Kala, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
64 |
ENVIRONMENTAL CONDITIONS MONITORING OF AAC BLOCKS USAGE OF HIGH RISE BUILDINGS AT TADEPALLI, ANDHRA PRADESH |
P. Naga venkata saikumar, D. Sathish chandra, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
65 |
STUDY ON SMART CITY TO TRANSFORM 23rd WARD OF VIJAYAWADA MUNICIPAL CORPORATION TO SMART WARDS |
N. Jagadeesh , T. Reshma , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
66 |
OPTIMAL RESOURCES UTILIZATION IN CONSTRUCTION INDUSTRY |
J. RamaJogi , SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
67 |
EVALUATION OF PRECAST TECHNOLOGY ON PROJECT PROFITABILITY |
M. Madhu , K. Hemantha Raja, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
68 |
RELABILITY OF IMPLEMENTING PRIMAVERA P6 IN FAST-TRACK PLANNING OF RESIDENTIAL BUILDING |
Jannu Saibabu, SS. Asadi , S .S. Bhanu Prakash, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
69 |
LOGISTICS CONTROL OVER MATERIALS OF METRO RAIL |
Md Nawaz Khan, T Naga Seshu Babu, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
70 |
IMPACT OF LIBERALISATION ON THE GROWTH AND DEVELOPMENT OF INDIAN POWER SECTOR |
S.Ravi Kumar, V S Prasad Kandi, P. Krishna Priya, |
Volume 11,Issue 9,Year 2020 |
International Journal of Management |
71 |
SOLID WASTE MANAGEMENT THROUGH PUBLIC-PRIVATE PARTNERSHIP MODEL |
Sesha Sai Ratnamala Bommareddy, SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
72 |
CONTROL OF VIBRATIONS IN BUILDING DUE TO SEISMIC FORCE USING TUNED MASS DAMPER |
Balachandar M , Vinod Y , |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
73 |
EFFECT OF CONCENTRATED ECCENTRIC LOAD IN LONGITUDINAL DIRECTION OF RECTANGULAR PLATES ON ELASTIC FOUNDATION |
Sahithi. G , V. Ranga Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
74 |
STRENGTH CHARACTERISTICS OF FLY ASH BASED GEOPOLYMER CONCRETE WITH 14 MOLAR NAOH ACTIVATOR |
Hymavathi G , V. Ranga Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
75 |
EXPERIMENTAL STUDY ON COIR FIBRE REINFORCED FLYASH BASED GEOPOLYMER CONCRETE WITH 12M MOLAR ACTIVATOR |
H Teja Kiran Kumar, K Prasanthi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
76 |
OPTIMIZATION OF TRANSPORT PROPERTIES FOR THE BINARY SYSTEM OF ACETONE- WATER AT 303.15-318.15 K BY RESPONSE SURFACE QUADRATIC MODEL |
Golamari Siva Reddy, Varakala Nikhil Reddy, Neeha Sultana, Ravavarapu Sai Tripura, Divyanshu Dhakate, Putha Deepika Sai Lakshmi, Bhanu Rajarajeswari Kapavarap, N Konda Reddy, |
Volume 11,Issue 9,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
77 |
EVALUATION OF GEOTECHNICAL PROPERTIES OF POND ASH FOR ECONOMIC ALTERNATIVE CONSTRUCTION MATERIALS FOR FILLS |
S. Srikanth Reddy, Mohammad Fariyaz Ahmed, SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
78 |
EVALUATION OF ENVIRONMENTAL IMPACT ASSESSMENT ON INDUSTRIAL PROJECTS: A MODEL STUDY |
D. Kiran Kumar Reddy, SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
79 |
EVALUATION OF FLOOD MANAGEMENT FOR KRISHNA RIVER BANK STRETCH OF ANDHRA PRADESH STATE |
Ch. Nithin Kumar Reddy, SS. Asadi , A.V.S.Prasad , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
80 |
EFFICIENT COST MANAGEMENT OF MATERIALS IN CONVENTIONAL AND PRECAST CONSTRUCTION |
Suma Yarlagadda, SS. Asadi , S. S. Bhanu Prakash, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
81 |
OPTIMAL PLANNING AND SCHEDULING OF HIGH RISE BUILDINGS |
Ch. Chowdeswari , D.Satish Chandra, SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
82 |
COST EFFICIENT ON PRECAST FOUNDATION WITH CAST IN-SITU FOUNDATION FOR MULTISTOREYED BUILDING |
B. Raja Sekhara Reddy, K. Shyam Chamberlin, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
83 |
AN INTEGRATED MANAGEMENT AND MEASUREMENT OF CUSTOMER FEASIBLILTY IN CONSTRUCTION INDUSTRY |
K. Krishna Chaitanya, SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
84 |
ASSESEMENT ON FACTORS DECLINING LABOUR PRODUCTIVTY IN CONSTRUCTION PROJECTS |
Achuth Kumar N.V, SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
85 |
STUDY ON ENHANCEMENT OF HUMAN SAFETY PROTECTION FACTORS IN CONSTRUCTION INDUSTRY |
K. Sai Dinesh, SS. Asadi , S. S. Bhanu Prakash, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
86 |
A CASE STUDY ON TIME AND COST DRIVEN FACTORS OF COMMERCIAL COMPLEX BY USING EVA (EARNED VALUE ANALYSIS) TOOL |
Sai Murali Krishna Reddy.Raya, SS. Asadi , S.S Bhanu Prakash, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
87 |
ISSUES RELATED TO SUBCONTRACTING PRACTICES IN CONSTRUCTION PROJECTS |
K. Kowshik , K. Deepak , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
88 |
A MULTI-STAGE, MULTI CRITERIA APPROACH FOR SOLID WASTE DISPOSAL SITE DESIGN AND MANAGEMENT: A MODEL STUDY |
Bhavya Bhanu Sigirisetty, SS. Asadi , A.V.S. Prasad , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
89 |
FINANCIAL VIABILITY OF BOT ROAD PROJECTS IN INDIA |
T. Ravi Teja, B.G.Rahul , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
90 |
FACTORS EFFECTING THE FAILURE ANALYSIS OF CONSTRUCTION PROJECTS |
Sk. Azeez ahamed, SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
91 |
INFLUENCE OF OPTIMAL COLUMN SPACING FOR G+11 STOREY RC MOMENT RESISTING FRAME |
G Sri Lakshmi, J D Chaitanya Kumar, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
92 |
ANALYSING THE SEISMIC BEHAVIOUR OF SET BACK BUILDING BY USING E-TABS |
Hema Venkata Sekhar, T. Venkata Das, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
93 |
STUDY ON BEHAVIOUR OF PRESTRESSED CONCRETE BRIDGE WITH & WITHOUT SOIL INTERACTION |
Ramyasri.N , Rangarao.V , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
94 |
EXPERIMENTAL STUDY ON COIR FIBRE REINFORCED FLY ASH BASED GEOPOLYMER CONCRETE FOR 10M |
M. Keerthi , K. Prasanthi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
95 |
A STUDY OF ENVIRONMENTAL ACCOUNTING IN INDIA WITH SPECIAL REFERENCE TO BPCL AND ONGC |
Sujeevan Kumar Bullard, A. Raju , |
Volume 11,Issue 9,Year 2020 |
International Journal of Management |
96 |
STRENGTH AND DURABILITY STUDY OF GEOPOLYMER CONCRETE INCORPORATING METAKAOLIN AND GGBS WITH 10M ALKALI ACTIVATOR SOLUTION |
M. Vijaya Bhargav, B. Sarath Chandra Kumar, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
97 |
STUDY ON LOSS OF CONTACT OF RECTANGULAR PLATES RESTING ON COHESIVE SOIL |
Sai Sowmith N, Ch. Hanumantha Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
98 |
EXPERIMENTAL STUDY ON STRENGTH AND DURABILITY PARAMETERS OF CONCRETE BY PARTIAL REPLACEMENT OF CEMENT WITH SODIUM POLYACRYLATE |
V. Suresh , M. Suresh Babu, M. Achyutha Kumar Reddy, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
99 |
CRITICAL SPEED AND NATURAL FREQUENCY ANALYSIS OF CRACKED ROTOR SHAFT |
Abhijeet H. Kekan, B. Raghu Kumar, |
Volume 10,Issue 6,Year 2019 |
International Journal of Mechanical Engineering and Technology |
100 |
EXPERIMENTAL INVESTIGATION OF STRENGTH PARAMETERS OF CEMENT AND CONCRETE BY PARTIAL REPLACEMENT OF CEMENT WITH INDIAN CALCIUM BENTONITE |
G. Vamsi Krishna Reddy, V. Ranga Rao, M. Achyutha Kumar Reddy, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
101 |
EFFECT OF ORGANIZATIONAL JUSTICE ON EMPLOYEE COMMITMENT - A STUDY |
C. Supriya , Sundari Dadhabai, |
Volume 11,Issue 9,Year 2020 |
International Journal of Management |
102 |
AN EXPERIMENTAL STUDY ON METAKAOLIN AND GGBS BASED GEOPOLYMER CONCRETE |
K. Chandra Padmakar, B. Sarath Chandra Kumar, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
103 |
PET BOTTLE WASTE AS A SUPPLEMENT TO CONCRETE FINE AGGREGATE |
Mastan Vali N, SS. Asadi , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
104 |
EFFECT OF ACTIVATOR RATIO ON STRENGTH PROPERTIES OF GEOPOLYMER CONCRETE |
P. Chamundeswari , V. Ranga Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
105 |
STUDY OF THE PROPERTIES OF METAKIOLIN AND GGBS BASED GEOPOLYMER CONCRETE |
P. Malleswara Rao, K. Hamantha Raja, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
106 |
EXPERIMENTAL STUDY ON BEHAVIOUR OF FLYASH BASED GEOPOLYMER CONCRETE |
Shaik Mohammd Shahbuddin, V. Ranga Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
107 |
EFFECT OF CHANGE OF STOREY DRIFT AND STOREY HEIGHT IN MULTI STOREY BUILDING WITH VARYING SEISMIC ZONES |
SK Gousia Tehaseen, J D Chaitanya Kumar, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
108 |
EFFECT OF SHAPE OF TALL BUILDINGS SUBJECTED TO WIND LOADING |
T.V.V.S. Murali Manohar, N. Jitendra Babu, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
109 |
EXPERIMENTAL STUDIES ON PROPERTIES OF GEOPOLYMER CONCRETE WITH GGBS AND FLY ASH |
V. Keerthy , Y. Himath Kumar, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
110 |
SEISMIC REACTION OF BUILDING FRAME UNDER VARIOUS ZONES CONSIDERING FLEXIBLE AND RIGID SUPPORTS |
V Ratna Priya, N Jitendra Babu, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
111 |
COMPARATIVE STUDY ON REGULAR IRREGULAR STRUCTURES USING EQUIVALENT STATIC AND RESPONSE SPECTRUM METHODS |
V. Rajendra Kumar, V. Ranga Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
112 |
SEISMIC RESPONSE OF PLANE FRAMES WITH EFFECT OF BAY SPACING AND NUMBER OF STORIES CONSIDERING SOIL-STRUCTURE INTERACTION |
Y. Naga Satyesh, K. Shyam Chamberlin, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
113 |
SOIL INTERACTION STUDIES ON PRESTRESSED CONCRETE BRIDGE USING FINITE ELEMENT METHOD |
Ramya. T , K. Shyam Chamberlin, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
114 |
DESIGN & ESTIMATION OF ELECTRIC STEEL TOWER |
N. Mahesh , V. Ranga Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
115 |
DYNAMIC ANALYSIS DESIGN AND DETAILING OF OFFICE BUILDING BY USING STRAP |
B. Kiran Kumar, P. Venkata Sarath, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
116 |
COMPARISON OF THE EFFICIENCY OF A TRAPEZOIDAL SHAPED STEEL AND R.C.C STRUCTURE |
Lalapeta Sudha, V. Ranga Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
117 |
TERRAIN CHARACTERISTICS EVALUATION USING GEO SPATIAL TECHNOLOGY: A MODEL STUDY FROM TELANGANA STATE, INDIA |
SS. Asadi , M.V. Raju , Ravali Koppula, Varikunta Bhargavi Sai, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
118 |
A REPORT ON PARTIAL SUBSTITUTE OF CEMENT IN CONCRETE USING RICE HUSK ASH |
Satish Babu, Sunder Kumar P., |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
119 |
STUDY ON THE PROPERTIES OF FLY ASH BASED GEO POLYMER CONCRETE WITH 18 MOLAR NaOH ACTIVATOR |
B. Prasanthi , V. Ranga Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
120 |
A STUDY ON REPLACEMENT OF CEMENT WITH RICE HUSK ASH |
Ch. Eka Sai Kumar, V. Raju , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
121 |
STUDY ON BEHAVIOR OF ALKALI ACTIVATED FLYASH BASED GEOPOLYMER CONCRETE |
CH. Hema Sindhusha, V. Ranga Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
122 |
STUDY ON BOX CULVERT SOIL INTERACTION |
I. Siva Rama Krishna, Ch. Hanumantha Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
123 |
NONLINEAR STATIC ANALYSIS OF RC BUILDING USING ISOLATED BEARINGS WITH DIFFERENT HILL SLOPES |
K. P. R. K. Sai Kumar, P. Sunder Kumar, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
124 |
COMPARISON OF VERTICAL SETTLEMENT IN A MULTI-STOREYED BUILDING IN DIFFERENT FOUNDATIONS OF VARIOUS SOILS |
K. Hemalatha Reddy, K. Sai Kala, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
125 |
STUDY OF SUITABLE FOUNDATION IN SEISMIC ZONE III CONSIDERING SSI |
M. Manjari , Ch. Hanumantha Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
126 |
ANALYSIS OF MULTI STOREY BUILDING WITH PRE-CAST LOAD BEARING WALLS WITH AND WITHOUT OPENINGS |
M. Harish , J. D. Chaitanya Kumar, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
127 |
EFFECT OF BAY SPACING AND NUMBER OF STORIES ON PLANE FRAMEBUILDINGS CONSIDERING SOIL STRUCTURE INTERACTION |
M. Anil Kumar, Ch. Hanumantha Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
128 |
STATIC LINEAR AND NON LINEAR (PUSHOVER) ANALYSIS OF RC BUILDING ON SLOPING GROUNDS ON MEDIUM SOILS IN DIFFERENT ZONES |
N.V. Mohanakrishna , Ch. Hanumantha Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
129 |
EFFECT OF BAGAGSE ASH ON PROPERTIES OF CONCRETE USED AS PARTIAL REPLACEMNT FOR CEMENT |
T. Gopi , T .N. Seshu Babu, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
130 |
STUDY ON THE BEHAVIOUR OF FLY ASH BASED GEO POLYMER CONCRETE WITH 20MOLAR NAOH ACTIVATOR |
T. Narendra , N. Srujana , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
131 |
SOIL STRUCTURE INTERACTION STUDY ON PLANE BUILDING FRAME SUPPORTED ON PILE GROUP EMBEDDED IN COHESIVE SOIL |
Ch. Hanumantha Rao, Lakshmi Pujitha V, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
132 |
STUDY ON BEHAVIOUR OF PARTIAL REPLACEMENT OF CEMENT WITH SUGARCANE BAGASSE ASH FOR HIGH STRENGTH CONCRETE MIX |
K. Akhilesh Reddy, I. Siva Kishore, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
133 |
A NOVEL BIOMETRIC APPROACH FOR FACIAL IMAGE RECOGNITION USING DEEP LEARNING TECHNIQUES |
R. Abinaya , Lakshmana Phaneendra Maguluri, S. Narayana , Maganti Syamala, |
Volume 11,Issue 9,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
134 |
STUDY ON SEISMIC EFFECT OF HIGH RISE BUILDING SHEAR WALL/WALL WITHOUT SHEAR WALL |
K Venkatesh , T. Venkatdas , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
135 |
EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES OF CONCRETE (M30) BY ADDING NATURAL FIBERS (JUTE FIBER) |
Ravi Shankar Pasala, G. Lalitha , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
136 |
EXPERIMENTAL STUDY ON CONCRETE (M30) BY PARTIAL REPLACEMENT OF FINE AGGREGATE WITH COPPER SLAG |
Ch. Sai Bhavagna, G. Lalitha , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
137 |
STUDY OF BEHAVIOUR OF GEO-POLYMER CONCRETE WITH RESPECT TO ITS MECHANICAL PROPERTIES OF GGBS AND FLYASH |
N. Durga Prasad, Y. Himath Kumar, |
Volume 8,Issue 2,Year 2017 |
International Journal of Civil Engineering and Technology |
138 |
INTRODUCTION TO DYNAMIC MALWARE ANALYSIS FOR CYBER INTELLIGENCE AND FORENSICS |
P V Vara Prasad, N Sowmya , K Rajasekhar Reddy, P Jayant Bala, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
139 |
A FRAMEWORK FOR GENERATING RANKINGS TO E-COMMERCE PRODUCTS BASED ON REVIEWS USING NLP |
T.Mastan Rao, N.Mounika , K.Hema Chowdary, T.Sudhir , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
140 |
A COMPARATIVE STUDY ON RECOMMENDATION SYSTEM USING HYBRID APPROACH |
P.V.R.D. Prasada Rao, Vineetha B , Ch. Priyanka , V. Satish , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
141 |
IOT WEARABLE DEVICE FOR THE SAFETY AND SECURITY OF WOMEN AND GIRL CHILD |
M. Pramod , Ch V. Uday Bhaskar, K. Shikha , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
142 |
ANOMALY DETECTION IN HEALTH CARE |
J. Yamini Devi, G. Keerthi , K. Jyotsna Priya, B. Geethasree Lakshmi, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
143 |
AN AUTOMATED SMS-UPDATE SYSTEM THROUGH IOT USING RASPBERRY PI |
Raju Anitha, S.Harsha Vardhan, Ch.Akhil , G.Sona , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
144 |
BUSINESS INTELLIGENCE - A SURVEY |
Nallamilli Veerraghava Reddy, Sriram Avinash, Chakka Shanmuk Sai, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
145 |
PRIORITIZING SOFTWARE MAINTENANCE ISSUES THROUGH ACQUISITION PROCESS |
B.Chaitanya Krishna, K.Rajesh Kumar Reddy, V.H.N.V.R.S.Sai Pavan, M.Shanthi , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
146 |
A CRITICAL REVIEW OF THE CLASS ROOM REQUIREMENTS IN COMPARISON WITH IDEAL CONDITIONS IN THE PRESENT COVID - 19 SCENARIO (W.R.T. PUBLIC JUNIOR SECONDARY SCHOOLS AT SIERRA LEONE) |
Sorie Saidu Kamara, Sundari Dadhabai, |
Volume 11,Issue 11,Year 2020 |
International Journal of Management |
147 |
MEASURING THE SECURITY LEVEL OF EELWE ALGORITHM USING MSEC METHOD |
Radhika Rani Chintala, Narasinga Rao M R, Somu Venkateswarlu, |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
148 |
SPEECH RECOGNITION USING THE NN |
A. Bhavani , Nageswara Rao Moparthi, |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
149 |
EVALUATION OF PAPR REDUCTION ABILITY OF 5G INSPIRED WAVEFORM CANDIDATES |
Pathuri Lavanya, Penke Satyanarayana, Mohammad Mohatram, |
Volume 11,Issue 11,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
150 |
A DDOS PREVENTION SYSTEM DESIGNED USING MACHINE LEARNING FOR CLOUD COMPUTING ENVIRONMENT |
P G Om Prakash, K Sasirekha , Daniel Vistro, |
Volume 11,Issue 10,Year 2020 |
International Journal of Management |
151 |
THE CASE OF EXPONENTIALLY DECREASING SUCTION WITH MHD EFFECTS IN FLOW THROUGH A POROUS CHANNEL |
CH.V. Ramana Murthy, D Vijaya Kumar, |
Volume 11,Issue 10,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
152 |
INFLUENCE OF DEMOGRAPHIC FACTORS ON PERCEPTIONS TOWARDS PERFORMANCE APPRAISAL PRACTICES AMONG THE MULTINATIONAL CORPORATION EMPLOYEES IN ANDHRA PRADESH |
Avinash Orsu, Romala Vijaya Srinivas, |
Volume 11,Issue 9,Year 2020 |
International Journal of Management |
153 |
APPLICATION OF TRANSLATES OF VAGUE SETS ON SUSPECTED CASES OF CORANA VIRUS DISEASE-2019 (COVID-19) |
Praveen Vardhan Kuppili, V.B.V.N. Prasad , |
Volume 11,Issue 10,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
154 |
A STUDY ON FACTORS EFFECTING THE EMPLOYEES ATTRITION IN HOTEL INDUSTRY WITH REFERENCE HYDERABAD |
Kiran Mayi Immaneni, Vedala Naga Sailaja, |
Volume 10,Issue 6,Year 2019 |
International Journal of Management |
155 |
MARKETING STRATEGIES OF MICRO FINANCE INSTITUTIONS IN INDIA |
M. Geeta , Ennala Deepa, |
Volume 11,Issue 9,Year 2020 |
International Journal of Management |
156 |
MICRO FINANCE AND IMPACT OF DIGITALIZATION |
M Geeta , C Naga Sivanand, |
Volume 11,Issue 7,Year 2020 |
International Journal of Management |
157 |
AN APPLICATION OF LPP-GRAPHICAL METHOD FOR SOLVING MULTI SERVER QUEUING MODEL |
S Vijay Prasad, J Peter Praveen, Ankita Tiwari, K Prasad , P Bindu , Ranadheer Donthi, B Mahaboob , |
Volume 9,Issue 12,Year 2018 |
International Journal of Mechanical Engineering and Technology |
158 |
AN INVENTORY MODEL WITH VARIABLE HOLDING COST AND PARTIAL BACKLOGGING UNDER INTERVAL UNCERTAINTY: GLOBAL CRITERIA METHOD |
Pavan Kumar, P.S.Keerthika , |
Volume 9,Issue 11,Year 2018 |
International Journal of Mechanical Engineering and Technology |
159 |
A STUDY ON IMPACT OF PERFORMANCE MANAGEMENT SYSTEM ON EMPLOYEE PERFORMANCE WITH SPECIFIC REFERENCE TO TECH MAHINDRA, HYDERABAD |
Ravi Chandra G , A. B. Saraswathi , |
Volume 9,Issue 10,Year 2018 |
International Journal of Mechanical Engineering and Technology |
160 |
NUMERICAL STUDY TO DIFFUSION OF CHEMICALLY REACTIVE SPECIES OVER MHD EXPONENTIALLY STRETCHING SURFACE OF A CASSON FLUID |
Hymavathi Talla, Pavana Kumari, W. Sridhar , |
Volume 9,Issue 10,Year 2018 |
International Journal of Mechanical Engineering and Technology |
161 |
A NOVEL BASED APPROACH TO CLASSIFY OPINION FEATURES USING SENTIMENT ANALYSIS ON TEXTUAL REVIEWS BY QD MINER TECHNIQUE |
Y Padma , Morsa Chaitanya, Pavan Kumar Kolluru, Anusha Marouthu, |
Volume 12,Issue 2,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
162 |
DESIGN AND IMPLEMENTATION OF SMART HOME CONTROL USING NI LAB VIEW |
Vasantha Sasikala, Surakasula Cherishma, Tiyyagura Prasanna Reddy, |
Volume 10,Issue 2,Year 2019 |
International Journal of Electronics and Communication Engineering and Technology |
163 |
DEAUTHENTICATION OF IP DRONES AND CAMERAS THAT OPERATE ON 802.11 WIFI STANDARDS USING ESP8266 |
S. Raja Gopal, P. Ranga Prasanth, S. Veerabhadra swamy, P. Sunil Krishna, R. Loshith Kumar, |
Volume 10,Issue 2,Year 2019 |
International Journal of Electronics and Communication Engineering and Technology |
164 |
PERFORMANCE ANALYSIS AND COMPARISON OF MULTIUSER MIMO BROADCAST PRECODING TECHNIQUES FOR 5G NETWORKS |
Madan Mohan Rao. Nelluri, Habibullah Khan, |
Volume 10,Issue 1,Year 2019 |
International Journal of Electronics and Communication Engineering and Technology |
165 |
TIME DOMAIN SOUND SPECTRUM MEASUREMENTS IN DUCTED AXIAL FAN UNDER STALL REGION AT THROTTLE POSITION 4 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 1,Year 2012 |
International Journal of Production Technology and Management |
166 |
TIME DOMAIN SOUND SPECTRUM MEASUREMENTS IN DUCTED AXIAL FAN UNDER STABLE REGION AT THROTTLE POSITION 5 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 1,Year 2012 |
International Journal of Design and Manufacturing Technology |
167 |
ANALYSIS AND PREDICTION OF TELEVISION SHOW POPULARITY RATING USING INCREMENTAL K-MEANS ALGORITHM |
D. Anand , A.V.Satyavani , A.V.Satyavani , B.Raveena , M.Poojitha , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
168 |
REMOTE MONITORING THROUGH TAB |
CH.Ramaiah , Venum Sai Parimala, Sadhu Pavan Kumar, GaliBhargav Reddy, Yarra Rahul, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
169 |
A STUDY ON THE CONCEPT OF PERFORMANCE MANAGEMENT SYSTEM IN IT INDUSTRY - LITERATURE REVIEW |
Ravi Chandra G, A.B. Saraswathi , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
170 |
A NEW TECHNIQUE OF GENERATING KEY FOR DIFFIE HELLMAN ALGORITHM |
Parikshit Sharma, R. Naga Lakshman Dileep, Ch. Sravana Bhargavi, Sudhir Ranjan Pattanaik, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
171 |
INTELLIGENT VOICE CONTROLLED HOME AUTOMATION SYSTEM |
T. Sai Pranay, G. Durga Bhavani, P. Siva Sravani, Sudhir Ranjan Pattanaik, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
172 |
PERCEPTION OF THE ENGINEERING STUDENTS TOWARDS 7PS OF ORGANISED RETAIL STORES AND UNORGANISED RETAIL STORES, VIJAYAWADA - A COMPARATIVE STUDY |
B. Kishore Babu, A.Tulsi Ram Naveen, Sampath , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
173 |
EVALUATION OF LAND USE/LAND COVER ON MINING AREA: A MODEL STUDY |
SS. Asadi , V.Abhlash Reddy, G.Sandeep Kumar, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
174 |
AN EFFICIENT SMART CAR PARKING SYSTEM BASED ON IOT CONCEPT |
M.Tanooj kumar, G.Sudheer , V.Harish , J.Baradwaj , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
175 |
BURIED PIPES DETECTION THROUGH GROUND PENETRATING RADAR IMAGES |
Chalasani srinivas, T. Srinivasarao , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
176 |
EXPERIMENTAL ANALYSIS ON FRANCIS TURBINE AT FULL LOAD TO DETERMINE THE PERFORMANCE CHARACTERISTICS CURVES |
T. Teressa , G G Visal , P Sai Ram, M Srimani Kumar, |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
177 |
OCCUPATIONAL STRESS AND JOB SATISFACTION: A STUDY OF AUTOMOTIVE INDUSTRY IN INDIA |
G. Sureshkrishna , Simanchala Das, |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
178 |
HEALTH, SAFETY AND WELFARE MEASURES FOR EMPLOYEES AT HINDUSTAN COCACOLA PVT. LTD: AN EMPIRICAL STUDY |
Aishwarya Jaju, Jikku Susan Kurian, P. Ravikanth , |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
179 |
ANALYSIS AND ESTIMATION OF AIR AND NOISE QUALITY: A MODEL STUDY FORM THIMMAPALLY |
SS. Asadi , B. Ramyaa Sree, M.Sujatha , M. Satish Kumar, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
180 |
PREPARATION OF BASE MAP INFORMATION USING REMOTE SENSING & GIS FOR CHANDARLAPADU AND VEERULLAPADU MANDALS |
SS. Asadi , S.Sai Sree, M.Sujatha , M. Satish Kumar, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
181 |
DESIGN AND ANALYSIS OF ELECTRIC THREE WHEELER AUTO |
K Someswara Rao, M Reddy Krishna, M Sai Nithesh, M Sri Dathu, G J N V Veda Vyas, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
182 |
DESIGN AND ANALYSIS OF LIGHT WEIGHTED CHASSIS |
K Someswara Rao, K. Pradeep Kumar, B. Sai Kumar, D. Suseel , R. Hari Krishnan, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
183 |
KINETIC ENERGY RECOVERY SYSTEM IN BICYCLE |
D. Mojeswara Rao, CH. Dharma Teja, N. Harshadeep , S. Jagadish Varma, N. Nitin Sai Kumar, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
184 |
DESIGN OF A POWER AUTONOMOUS SOLAR POWERED LAWN MOWER |
Sudhanshu G Chouhan, Sameer Ahmed Shaik, K Vamshi Krishna Reddy, Sai Rohith Bandaru, Leela Krishnan Vaidyabhushan, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
185 |
DESIGN, OPTIMIZATION AND THERMAL ANALYSIS OF A COMPRESSION IGNITION ENGINE CYLINDER USING NANO MATERIALS |
Kunduru Srinivasa Reddy, Guttula Syam Gopal, Chennuboina Ratna Kishore, Puli Dileep, Maka Harsha Vardhan, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
186 |
PERFORMANCE CHARACTERSTICS OF BIODIESEL USING RICE BRAN OIL ON 4 STROKE SINGLE CYLINDER DIESEL ENGINE |
N Siva Teja, N J Arun Kiran, P Shiva Teja, A Gopi Krishna, D Sai Srikar, V Akhil , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
187 |
DESIGN AND COUPLED(THERMAL AND MECHANICAL) FIELD ANALYSIS OF CERAMIC COATED PETROL ENGINE PISTON |
Deepak Kumar Yadav, Suraj Kumar, Y.Ravi Prakash Reddy, G. Veerbhadra , PothamsettyKasi V Rao, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
188 |
COMPARISON OF THE MECHANICAL PERFORMANCE BETWEEN (AGAVE AMERICANA, LADIES FINGER, HYBRID) REINFORCED POLYESTER COMPOSITES WITH AND WITHOUT MOLYBDIC ACID |
K.M.V Ravi Teja, Shaik Mohammed Ali, Danthuluri Yashwanth Varma, Balla Bala Krishna, Putti Rajesh, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
189 |
DESIGN AND ANALYSIS OF DIFFERENTIAL GEAR BOX IN AUTOMOBILES |
N. Siva Teja, K. Dinesh Babu, M. Siva Nagendra, Ch. Phanideep , J. Sai Trinadh, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
190 |
SIMULTANEOUS SCHEDULING OF BOTH MACHINES AND AGV`S IN FLEXIBLE MANUFACTURING SYSTEM BY USING BINARY PARTICLE SWARM OPTIMISATION ALGORITHM |
M.Nageswara Rao, D.Hari Krishna, P.Triyaplus , P.Vivekananda , M.Chanukya , K. Bhargav , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
191 |
STEADY STATE THERMAL ANALYSIS OF HEAT SINK WITH FINS OF DIFFERENT GEOMETRY |
V Naga Raju, P. Sivakumar , K Lakshmi Narayana, A Srujan , K Mallikarjun , G Krishna , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
192 |
THE SPECIFIC GRAVITY OF BIODIESEL AND ITS BLEND WITH GASOLINE |
S.Rohini Srilakshmi, K.Siri Manikanta Reddy, D.Charan Kumar, K.Kiran Kumar, K.Sriram , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
193 |
STUDY OF HEAT TRANSFER THROUGH ROTATING RECTANGULAR DUCT |
M.Karthik , K.Tirumal Rao, B.Amar Nath, T.V.Anil Kumar, Ch.SivaKrishna , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
194 |
KARANJA OIL AS AN ALTERNATIVE FUEL WITH AIR PREHEATER |
G. Sandeep , G. Dattatreya , S. Rohini Sri Lakshmi, N. Shiva Kumar, Venkatesh Potnuru, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
195 |
DESIGN AND ANALYSIS OF HYBRID VEHICLE |
N.Siva teja, B.Yogi Anvesh, Ch.Mahesh , D.Sai Kiran, D.Satya Harsha, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
196 |
DOUBLE WISHBONE SUSPENSION SYSTEM |
B. Rohith Raju, K.P.V.S. Raja Rao, V.V Suraj , P. Ratna Prasad, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
197 |
INVESTIGATION OF MECHANICAL PROPERTIES OF AL 7075/SIC/GR HYBRID METAL MATRIX COMPOSITES |
Rohith Nagabhyrava, Sravan Kota, Aravind Geda, Sri Harsha Gudi, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
198 |
IMPACT TEST ON MOTORCYCLE HELMET FOR DIFFERENT ANGLES USING FINETE ELEMENT ANALYSIS |
B.Siva Kumar, B.Sai Krishna, M.Raveendra Prasad, J.Yaswanth , G.Diwakar , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
199 |
EXPERIMENTAL STUDY ON SYNTHESIS AND OPTICAL PROPERTIES OF ZNO-CUO NANO PARTICLES |
G. Anil Kumar, Ch. Naveen Kumar, S. Sree Raja, V. Predeep Reddy, Ratna Prasad Paladagu, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
200 |
FABRICATION AND TESTING OF AUTOMOBILE POLLUTANTS ABSORBERS |
K. G. V. Jayaram , V. Raghukalyan , H. Jeevitesh , K. V. Ramana , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
201 |
ECONOMIC JUSTIFICATION FOR IMPLEMENTATION OF 5S IN MSMES: A CASE STUDY ON M/S. UNNATHI CNC TECHNOLOGIES PVT LTD |
Shaik Anwar Hussain, Mudunnuru Sai Pavan, A Durga Sandeep, CH Udaya Bhaskar, P. Ratna Prasad, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
202 |
HARDNESS AND MICROSTRUCTURE TESTING OF FRICTION STIR WELDING T-JOINTS OF AL 64430 ALLOY |
Gyan Setu, B.Sai Sandeep, A.Praveen Kumar, B.V. Akshay Kumar, B.Satya Akhil, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
203 |
STRUCTURE AND PROPERTY RELATION OF HYBRID ALUMINIUM COMPOSITE |
Kammuluri.Baburaja , G.Arun Kumar, Lanka Venkatesh, Mekala Yogesh, Moparthi Ganesh Sai Gowtham, Dhayapulley Sai Chaitanya kishore, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
204 |
SYNTHESIS AND CHARACTERIZATION OF ALUMINIUM-BAMBOO LEAF ASH METAL MATRIX COMPOSITE BY STIR CASTING TECHNIQUE |
Kammuluri.Baburaja , Dhayapulley Sai Chaitanya Kishore, Showri Ravi Teja Dasari, Venkata Sai Alusuri, Mahabub Jani Shaik, Avinash Lingineni, Raju Ravuri, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
205 |
EXPERIMENTAL INVESTIGATION ON HEAT TRANSFER ENHANCEMENT ON PLATE HEAT EXCHANGER USING AL2O3 |
T.Teressa , A.ChanduSagar , B.SaiNithin , K.SharanTeja , G.Suresh Reddy, P.Akhil , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
206 |
MODELING AND ANALYSIS OF A CNC MILLING MACHINE BED WITH NANO MATERIAL (GRAPHENE) |
Ch. Sridhar Yesaswi, T. Subrahmanyam , G. Sai Karthik, N. Sai Sudheer, S. Farooq Basha, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
207 |
EXPERIMENTAL INVESTIGATION ON FOUR STROKE SINGLE CYLINDER DIESEL ENGINE BY USING LINSEED OIL |
V.Nagaraju , P.Siva Kumar, K.Sreekanth , A.SaiHarsha , P.Venkatesh , K.Hanu Kumar, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
208 |
EFFECT OF PRE-TWIST ON FREE VIBRATION CHARACTERISTICS OF A CANTILEVER BEAM WITH EXPERIMENTAL VALIDATION |
K. Ravi Prakash Babu, K.F.V. Prasanth , V. Vamsi Sai, M.V. Surendra Kumar, B. Naga Sai Kumar, B. Sai Chaitanya, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
209 |
INVESTIGATION OF MECHANICAL PROPERTIES OF AL 7075/B4C/GR HYBRID METAL MATRIX COMPOSITE |
M. Shanmukha Anirudh, Shaik Nagoor Asif, Surya vamsi Nadella, K.Nagireddy , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
210 |
EXPERIMENTAL INVESTIGATION OF 4-STROKE SINGLE CYLINDER DIESEL ENGINE USING ALTERNATIVE FUELS |
P.Siva Kumar, V.Nagaraju , Subhankarghosh , Rajeevraushan , G.S.S.Anuroop , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
211 |
HEAT TRANSFER ENHANCEMENT OF DOUBLE PIPE HEAT EXCHANGER USING TWISTED TAPE INSERTS |
Kalapala Lokesh, N. Somasankar , Sk. Azharuddin , K. Uma Maheswara Rao, M. Hari Krishna, M. Siva Sankar Mani Kumar, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
212 |
INVESTIGATION OF MECHANICAL PROPERTIES OF DURALUMIN SANDWICH HYBRID COMPOSITE USING E-GLASS FIBER |
Bhanu Teja Chintalapudi, Chaithanya Baba Gonuguntla, Manideep Pothuri, Jamini Kant S.H.V, Arief Pathan, Raj Kumar Pittala, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
213 |
MULTI PARAMETERS OPTIMIZATION OF EDM USING GREY ENTROPY METHOD |
Murahari Kolli, Sk. Khadar Basha, Nandana Kumar Midatana, Manindra Bedhapudi, Sai Srikar Desina, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
214 |
COMPARISON OF THE MECHANICAL PERFORMANCE BETWEEN (GLASS, SISAL, LADIES FINGER, HEMP)REINFORCED POLYESTER COMPOSITES WITH AND WITHOUT MOLYBDIC ACID |
K.M.V Ravi Teja, Bandla Kunjunath, Kothakota Chandrasekhar, Venkata Lakshmi Mohan kunapaneni, Sivakoti Siddhartha, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
215 |
WATER PUMPING SYSTEM FOR INUNDATED AGRICULTURAL FIELDS |
P.Vamsi Krishna gupta, J.Priyatham Reddy, T.Pardha Saradhi, PVR Kedarnath , K. V. Ramana , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
216 |
STUDY OF HEAT TRANSFER THROUGH RECTANGULAR DUCT IN A GAS TURBINE |
K.Rakesh Sai, D.Gowru Naidu, G.Balu Mahendra, Y.V.Satyanarayana , Ch.SivaKrishna , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
217 |
SCHEDULING OF MACHINES AND AUTOMATED GUIDED VEHICLES IN FMS USING SHUFFLED FROG LEAP ALGORITHM |
Medikondu Nageswararao, Makkena Naveenkumar, Majety Vamshimohan, Gandham Jitendra Krishna, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
218 |
DESIGN AND ANALYSIS OF VERTICAL AXIS WIND TURBINE BLADE |
G. Diwakar , Ch. NVSS Lakshmi Narayana, Y. Raviram , B. Sai Sujan, S.Bhanu Prakash, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
219 |
STUDY OF DIESEL FUEL EMISSIONS IN HCCI TECHNOLOGY |
Dollu Bhaskar, Challa Sai Siva Reddy, Jakkam Naveen Reddy , Manchikanti Pavan, Jinaga Shreenath, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
220 |
EFFECT OF INLET GEOMETRY IN THE QUALITY OF VORTEX FORMED USING VORTEX FLOW CHANNEL |
Dipesh Thapa, Aakash Mishra, K. Sai Sarath, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
221 |
EFFECT OF ROLLING ON HARDNESS OF ALUMINIUM METAL MATRIX COMPOSITES-AN EXPERIMENTAL STUDY |
T. Vijay Kumar, G. Jayashankar , B. Srinivas , J. Jithendra , M. Sumedh , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
222 |
A COMPUTATIONAL SOLUTION TO THE SHORT C-D NOZZLE FOR ROCKET APPLICATIONS |
K.V.M.Ravi Teja, K.H.M.Sreeram , MD.Zubair , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
223 |
DESIGN AND ANALYSIS OF WHEEL RIM WITH SPOKE PATTERNS USING DIFFERENT MATERIALS |
Jamaleswara Kumar. P, Sai Krishna Narne, Aditya Talluri, Neeraj Yarra, Sri Ram. N, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
224 |
COMPARISON OF NACA 23024 AEROFOIL WITH AND WITHOUT VORTEX GENERATORS USING CFD |
Naveen Janjanam, K. Raja Babu, S.S. Chowhan , Abid Khan, M. Teja , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
225 |
OPTIMIZATION OF EDM PROCESS PARAMETERS ON HYBRID COMPOSITE WITH ONE FACTOR APPROACH |
MurahariKolli , ShaikKhadarBasha , MadhuSudhan Rao.D, Ramapulla Reddy N, K.V. Manoj , K. Sai Krishna, K.N.S.Abhishek , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
226 |
EFFECT OF ROLLING ON MICROSTRUCTURE OF ALUMINIUM METAL MATRIX COMPOSITES WITH MAGNESIUM PARTICULATES-AN EXPERIMENTAL STUDY |
T.Vijaya Kumar, Niranjanreddy.S , P.K. Saketh , Harsha.V , Sai Bharath Reddy.C, Sai Krishna.B, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
227 |
COMPUTATIONAL ANALYSIS OF PROPELLANT FLOW ON THE STRUCTURE OF THE WALL OF A BI-PROPELLANT THRUSTER |
V. Krishna Koundinya, Y.V. Hanumantha Rao, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
228 |
NUMERICAL INVESTIGATION OF HEAT TRANSFER AND FLUID FLOW IN PLATE HEAT EXCHANGER WITH DIFFERENT TYPES OF PLATE MATERIALS |
D.V.Sai Teja, Y.V. Hanumantha Rao, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
229 |
ON HEAT DISTRIBUTION OF THE CERAMIC COATED ALUMINUM RADIAL FINS. A FEA STUDY |
Rayapureddy Naga Vivek, K Dinesh Kumar, M Sreekanth , J Nikhil Kumar, T Kanthimati , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
230 |
MODELING AND ANALYSIS OF HEXAGONAL UNIT CELL FOR THE PREDICTION OF EFFECTIVE THERMAL CONDUCTIVITY |
Kamala Priya B, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
231 |
COMPARISONS OF MACHINING PARAMETERS IN ELECTRO DISCHARGE MACHINING OF ALUMINUM 6082 AND HYBRID NANO METAL MATRIX COMPOSITE |
S. Sreenivasulu , M. Venkatesulu , T. Vijaya Kumar, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
232 |
CFD SIMULATIONS AND VALIDATION THROUGH TEST DATA OF A DOUBLE PIPE COUNTER FLOW HEAT EXCHANGER |
Peddi Dilleswara Rao, B. Nageswara Rao, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
233 |
NUMERICAL INVESTIGATION ON HEAT TRANSFER AND FLUID FLOW OF SHELL-SIDE FOR SHELL AND TUBE HEAT EXCHANGER WITH HEXAGONAL VENT BAFFLE BY USING CFD |
G. Vijay Teja, K.V. Narasimha Rao, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
234 |
SPECTROSCOPIC CHARACTERIZATION OF MECHANICALLY SYNTHESIZED MOO3/TiO2 COMPOSITE NANOPOWDERS |
T. Vijaya Kumar, K. V. Ramana , R.B. Choudary , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
235 |
ENHANCED STUDY ON FOG COMPUTING AND IMPLEMENTATION ON VEHICULAR COMMUNICATION |
Konedana Blessy Hadassa, Arnold Vijaya Solomon Boddu, |
Volume 12,Issue 3,Year 2021 |
International Journal of Electrical Engineering and Technology |
236 |
DESIGN OF AUTOMATIC GUIDED VEHICLES |
K. Kishore Kumar, M.Siva Krishna, D.Ravitej , Bhavana , |
Volume 3,Issue 1,Year 2012 |
International Journal of Mechanical Engineering and Technology |
237 |
NEW METHOD IN PREDICTIVE MAINTENANCE OF A MACHINE |
N. Rishi Kanth, C.V Mohan Rao, G. Yedukondalu , |
Volume 3,Issue 1,Year 2012 |
International Journal of Mechanical Engineering and Technology |
238 |
A COMPARATIVE STUDY FOR EVALUATION OF DIFFERENT FORM WORK SYSTEMS UTILIZATION IN CONSTRUCTION PROJECTS |
SS. Asadi , PV. Praneeth , |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
239 |
EXPERIMENTAL INVESTIGATION ON PERFORMANCE OF COMPRESSION IGNITION ENGINE FUELLED WITH MAHUA OIL METHYL ESTERS |
K. Srinivasa Reddy, P. Revanth , M. Yatheendar , J.S.V.M Teja , P. Rajavardhan Reddy, |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
240 |
MATERIALS MANAGEMENT OF POWER TRANSMISSION LINE CONSTRUCTION PROJECT: A MODEL STUDY FROM RAMPURA TO JAGULUR POWER TRANSMISSION LINE CONSTRUCTION |
SS. Asadi , M. Siva Krishna Reddy, |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
241 |
A COMPREHENSIVE ANALYSIS ON SENTIMENTAL DATA SET USING MACHINE LEARNING TECHNIQUE |
P. Pavan Kumar, N. Lakshmi Chandana, A. Sai Venu Madhav Reddy, D. Rajeswara Rao, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
242 |
A STUDY OF REVERSING VALVE PERFORMANCE IN SPLIT TYPE AIR CONDITIONER |
G.Saravanan , KG.Muthurajan , G.Murali , M.Arunkumar , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
243 |
EXPERIMENTAL STUDY ON STRENGTH ASPECTS OF GEOPOLYMER CONCRETE WITH FORTA FERRO FIBERS |
V.Kiranmayee , Aravindan , Mohd Hamraj, |
Volume 10,Issue 2,Year 2019 |
International Journal of Civil Engineering and Technology |
244 |
CHARACTERIZATION OF GYPSEOUS SOIL STABILIZED WITH FLY ASH GEOPOLYMER ANALYZED BY FL-RBF MODEL |
Seeta Kamalakar Rao, Sanjeet Kumar, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
245 |
DYNAMIC ANALYSIS OF SOIL STRUCTURE INTERACTION (SSI) USING ANFIS MODEL WITH OBA MACHINE LEARNING APPROACH |
Ponnala Ramaiah, Sanjeet Kumar, |
Volume 9,Issue 11,Year 2018 |
International Journal of Civil Engineering and Technology |
246 |
EVALUATION OF HUMAN RESOURCES MANAGEMENT IN CONSTRUCTION INDUSTRY USING ANALYTICAL APPOROACH: A MODEL STUDY |
D. Prasanna Kumar, A. Satish , SS. Asadi , |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
247 |
EVALUATION OF CUSTOMER PERCEPTION TOWARDS ONLINE ADVERTISEMENT TECHNOLOGY AN EMPIRICAL STUDY FROM VIJAYAWADA |
D.Prasanna Kumar, K.Surya Kumar, SS. Asadi , |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
248 |
ESTIMATION OF VEHICULAR POLLUTION GROWTH AND THEIR IMPACTS ON AIR QUALITY: A MODEL STUDY |
K.Yugandhar Reddy, K.V.S.G.Murali Krishna, I.Srinivasa Reddy, SS. Asadi , |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
249 |
ROLE OF LEADERSHIP ON EMPLOYEE RETENTION - A STUDY ON CORPORATE HOSPITALS |
K.S.Sekhar Rao, Ch. Sahyaja , P.Akhil , N.Lakshmi Narasimha, |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
250 |
SCHEDULING OF MACHINES AND AUTOMATED GUIDED VEHICLES IN FMS USING SCATTER SEARCH ALGORITHM |
P Anil Kumar, M Nageswararao , T Yeswanth Kumar, M Manish Kumar, V Bhanu , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
251 |
A STATISTICAL EVALUATION ON ROAD SAFETY AUDIT: A MODEL STUDY FROM HANUMAN JUNCTION TO KANAKA DURGA VAARADHI VIJAYAWADA |
N.N.G. Sai Pavan, K. Hemantha Raja, B.G.Rahul , SS. Asadi , |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
252 |
MICRO INSURANCE - MECHANISM AND OPPORTUNITIES FOR THE SUSTAINABLE DEVELOPMENT OF INDIAN ECONOMY |
Gowsya Shaik, P. Raja Babu, |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
253 |
ENGINEERED IMPACT OF TANGIBLES ON REPURCHASE INTENTIONS IN ORGANIZED FAST FOOD INDUSTRY |
P V Vijay Kumar Reddy, Verapalli Surya Teja, Pavan M Kumar, |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
254 |
PROCUREMENT PATTERNS AND INFLUENTIAL DETERMINANTS IN THE COTTON INDUSTRY |
PV Vijay Kumar Reddy, K Sai Nikhil, M Sai Sravani, P Naresh , |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
255 |
EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER COEFFICIENT AND FRICTION FACTOR IN A DOUBLE PIPE HEAT EXCHANGER WITH AND WITHOUT TWISTED TAPE INSERTS USING ZNO-PROPLYENE GLYCOL NANO FLUID |
T. Vijaya sagar, Y.Appalanaidu , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
256 |
DEVELOPMENT OF AN EXPERT SYSTEM FOR CONDITION MONITORING OF SUBMARINES USING IR THERMOGRAPHY |
Mojeswara Rao Duduku, Kavuluri Lakshmi Narayana, Kavuluri Venkata Ramana, Chintalapati Sridhar Yesaswi, |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
257 |
NON-CONTACT ACCELERATION MEASUREMENT IN ORTHOGONAL DIRECTIONS |
G.V. Pratheek , M. Mahadev , K. Rohit , K. Ravi Shankar, A.S.R.Murty , |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
258 |
DESIGN OF CHASSIS OF TWO-WHEELED ELECTRICAL VEHICLE BY OPTIMIZATION OF DESIGN PARAMETERS USING TAGUCHI METHOD |
K Someswara Rao, M Pradeep Kumar, S Satya Prasad, B Siva Teja, Y Veera Sai Chandh, |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
259 |
STRUCTURAL ANALYSIS OF CALOWI MANUPILATOR |
Abid Ali. M, Srinivas. S , Jayanth Naidu.M, Rahul.M , Rohit. B , |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
260 |
STUDIES ON CHARACTERIZATION OF AL 6061/ MOS2 METAL MATRIX COMPOSITE |
M. Geeta Rani, Ch.V.S.ParameswaraRao , K .Rama Kotaiah, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
261 |
DESIGN AND SIMULATION OF MEMS BASED ACCELEROMETER FOR CRASH DETECTION AND AIR BAGS DEPLOYMENT IN AUTOMOBILES |
P.Vinay , Ch. Venkata Satya Sri Vamsi, M.Hemanth , A.Saiteja , Mohammad Abid Ali, P. Ashok Kumar, |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
262 |
SIMULATION AND ANALYSIS PROSTHETIC LEG |
K. Karthikeya , |
Volume 8,Issue 2,Year 2017 |
International Journal of Mechanical Engineering and Technology |
263 |
DESIGN OF CARTESIAN TYPE AUTOMATED GLASS CLEANING SYSTEM FOR SKYSCRAPER`S |
S. Ramesh Kumar, Md. Ishaakh Ahamed, Keshav Singhal, Akash Srivastava, P. Joseph , |
Volume 8,Issue 2,Year 2017 |
International Journal of Mechanical Engineering and Technology |
264 |
EFFECTIVENESS OF FACTORS INFLUENCING EMPLOYEE RETENTION IN INFORMATION TECHNOLOGY SECTOR - INDIAN SCENARIO |
G. Radha Krishna Murthy, Itikela Shyam Sundar, |
Volume 12,Issue 4,Year 2021 |
International Journal of Management |
265 |
A SURVEY ON APPLICATIONS OF INTERNET OF THINGS |
Riaz Shaik, Narendra Kumar Gudapati, Nikhil Kumar Balijepalli, Harshitha Raj Medida, |
Volume 1,Issue 2,Year 2019 |
International Journal of Computer Applications |
266 |
PERFORMANCE STUDY OF A DIESEL ENGINE WITH EXHAUST GAS RECIRCULATION (EGR) SYSTEM FUELLED WITH PALM BIODIESEL |
M. ArunKumar , G. Murali , S. Vikky , R. Thangadurai , M.Tamilarasi , |
Volume 6,Issue 1,Year 2018 |
International Journal of Thermal Engineering |
267 |
TIME DOMAIN SOUND SPECTRUM MEASUREMENTS IN DUCTED AXIAL FAN UNDER STABLE REGION AT THROTTLE POSITION 7 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 1,Issue 1,Year 2013 |
International Journal of Thermal Engineering |
268 |
TIME DOMAIN SOUND SPECTRUM MEASUREMENTS IN DUCTED AXIAL FAN UNDER STALL REGION AT THROTTLE POSITION 2 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 1,Issue 1,Year 2013 |
International Journal of Thermal Engineering |
269 |
SCOPE FOR DATA ENABLED INFRASTRUCTURE IN PETROCHEMICAL INDUSTRIES: A SOLUTION TO MIDSTREAM OPERATING CHALLENGES |
J. Pradeep Kumar, V.S. Lakshmi Ravuri, B. Saritha , Jayanna Kanchikere, T. Sreenivasulu , G. Babu Rao, |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
270 |
COMPARATIVE STUDY OF PHYSICAL AND CHEMICAL ADSORBENTS WITH COMPOSITE ADSORBENT PAIRS FOR APPLICATION IN ADSORPTION REFRIGERATION SYSTEM |
Saikumar Ganna, Ramakrishna Konijeti, Abhishek Dasore, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
271 |
THERMAL DESIGN OF SPIRAL PLATE HEAT EXCHANGER THROUGH NUMERICAL MODELLING |
Venkateswara Rao Metta, Ramakrishna Konijeti, Abhishek Dasore, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
272 |
UNSTEADY MHD CASSON FLUID FLOW PAST AN OSCILLATING PERMEABLE VERTICAL SURFACE WITH NEWTONIAN HEATING AND THERMAL RADIATION |
V. MANJULA , K. V. CHANDRA SEKHAR, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
273 |
EMERGENCE OF AUTOMOBILE INDUSTRY IN INDIAN CONTEXT - A CONCEPTUAL STUDY |
Krishna Reddy, P V Vijay Kumar Reddy, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
274 |
PNEUMATIC RAM STORED ENERGY UNITS THROUGH WINDMILL SOURCE -TWO COMPARATIVE TECHNIQUES |
Divya Phanindra Parise, Y.V. Hanumantha Rao, K. Srinivasa Reddy, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
275 |
INVESTIGATION OF FUEL INJECTION PRESSURE IMPACT ON CI ENGINE PERFORMANCE AND EMISSIONS USING BIODIESEL BLEND WITH ALUMINA NANO ADDITIVES |
G. Jamuna Rani, Y.V. Hanumantha Rao, B. Balakrishna , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
276 |
ANALYSIS OF RISK ASSESSMENT IN CONSTRUCTION OF HIGHWAY PROJECTS USING RELATIVE IMPORTANCE INDEX METHOD |
Nagalla Vasishta, D.Satish Chandra, SS. Asadi , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
277 |
STUDIES ON ELECTRON BEAM WELDING OF CuCrZr ALLOY PLATE |
Bharath Raghav.V, Satya Mahesh.P, Sai Ram.K, Lokesh kalyan G, Chakravarthy K P K , |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
278 |
DESIGN FOR CRASHWORTHINESS OF AN AUTOMOTIVE SUB-SYSTEM USING CAE TECHNIQUES |
Kiran Kumar Dama, Srinivasulu , Tanvith Sai, Swaroop , Dileep , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
279 |
NANO COATINGS AS BEARING LINERS-AN EXPERIMENTAL INVESTIGATION |
K.V. Ramana , K.S.K. Mallik , K. Narasimhakalyan , A. Mani Ratnam, G. Prasanth Kumar, P. Ravi Teja, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
280 |
MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF AL6061/GR COMPOSITES PROCESSED THOUGH STIR CASTING |
Thella Babu Rao, M.S.V.S. Goutham Karthik, Ch. K.S. Raviteja , G. RajaSekhar Reddy, N. Sravan Kumar Reddy, V. Shanmukha Prasad, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
281 |
ATTENUATION OF ACOUSTIC NOISE FROM SUPERSONIC JET NOZZLE |
T. Anup Kumar, P.Rohit Rama Raju, T.Vinay , R.Mahesh Babu, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
282 |
DESIGN AND CONSTRUCTION OF A REACTIVE TYPE MUFFLER FOR A FORMULA STUDENT VEHICLE |
P.Siva Kumar, Chigurupati Srikar, T.Sanjeev Kumar Reddy, K.VishnuVardhan Babu, T.Sai Prakash, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
283 |
EVALUTION OF TERRAIN CHARACTERISTICS FOR SUSTAINABLE UTILIZATION OF RESOURCE IN URBAN ENVIRONMENT: A MODEL STUDY FROM HYDERABAD |
Sunil , SS. Asadi , Reddy SRK , |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
284 |
OBSERVATIONS OF SPIKING PHENOMENON IN ELECTRON BEAM WELDED ETP COPPER PLATES |
Vara Prasad, Ram Sai, K.P.K. Chakravarthy , L. Ranganath , Venkata Naresh Mandhala, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
285 |
EXPERIMENTAL INVESTIGATION ON MECHANICAL BEHAVIOUR OF CENOSPHERE REINFORCED EPOXY COMPOSITES |
Shashikant Kushnoore, G Anoop Varma, K Akhil , Ch Jathin , M Munish Reddy, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
286 |
FLOW CHARACTERISTICS OF IMPINGING JETS |
R. Raveendranath , R. Santhosh kumar, Kuppireddy Ramya, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
287 |
FLEXURAL BEHAVIOUR OF REINFORCED GEOPOLYMER CONCRETE BEAMS WITH GGBS AND METAKAOLINE |
P. Uday Kumar, B. Sarath Chandra Kumar, |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
288 |
DESIGN AND OPTIMISATION OF ROLLER CONVEYOR SYSTEM |
Venkata Reddy Sangana, Salman Pattan, Sai Charan V, Amarnadh M , Bharath P , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
289 |
GENERATING FUNCTIONS FOR HYPERGEOMETRIC POLYNOMIALS OF TWO VARIABLES Rn(β;γ;x,y)BY TRUESDELL METHOD |
Tadikonda Srinivasulu, V. S. Bhagavan , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
290 |
ROLE OF LEADERSHIP STYLES IN QUALITY OF WORK-LIFE: A STUDY ON EDUCATION SECTOR |
K.S. Sekhara Rao, Ch. Sahyaja , S. Lahari , S. Vasavi Pravallika, |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
291 |
EXPERIMENTAL STUDIES ON SOLAR ALUMINIUM CAN AIR HEATER WITH AND WITHOUT LATENT HEAT STORAGE |
G. Murali , G. Sandeep , N. Hari , M. Praveen , B. Neeraj , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
292 |
DESIGN OF STEERING GEOMETRY FOR FORMULA STUDENT CAR`S |
J. Naveen , T. Deepak Varma, D. Sudhakar Reddy, N. Guru Vardhan, K. Chandra Mouli, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
293 |
STUDY OF MECHANICAL AND METALLURGICAL BEHAVIOUR OF HYBRID ALUMINIUM COMPOSITE |
G. Arun Kumar, Sinisetty Surya, G. S. Santhosh Naidu, P. Rohith , K. Raghuram , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
294 |
MICROSTRUCTURAL AND MECHANICAL PROPERTIES CHARACTERIZATION OF AL6061/NANO TiCp COMPOSITES FABRICATED THROUGH STIR CASTING |
Thella Babu Rao, Kamatham Venkata Sai Prem, Nistala Yashika, Chevvakula Sandeep, Nalli Vinod, V Shanmukha Prasad, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
295 |
FLUENT ANALYSIS OF SHELL AND TUBEHEAT EXCHANGER USING NANOFLUIDS |
M Sakthivel , A Harikrishna , K Satyadeep , B Vineeth , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
296 |
STUDY ON STRENGTH AND BEHAVIOR OF CONVENTIONALLY REINFORCED SHORT CONCRETE COLUMNS WITH CEMENT FROM INDUSTRIAL WASTES UNDER UNIAXIAL BENDING |
V. Ranga Rao, D.S.R. Murty , M. Achyutha Kumar Reddy, |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
297 |
EXPERIMENTAL INVESTIGATIONS ON PERFORMANCE AND EMISSION CHARACTERISTICS OF A DIRECT INJECTION DIESEL ENGINE USING CANOLA OIL BIODIESEL WITH EXHAUST GAS RECIRCULATION (EGR) |
Y.V. Hanumantha Rao, G Jamuna Rani, B Sri Krishna Kalyan, V Avinash , Ch Narendra , I Ravi Kiran, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
298 |
EFFECT OF ABRASIVE MATERIAL ON SURFACE ROUGHNESS IN AN ABRASIVE JET MACHINING (AJM) |
B.V. Dharmendra , G.Bhuvaneswar , V.Megha Sai Krishna, D.Sumanth Kumar, T.Gowtham Avinash, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
299 |
GENERALIZED (α,β) -RATIONAL CONTRACTIONS IN ORDERED Sb -METRIC SPACES WITH APPLICATIONS |
B. Srinuvasa Rao, G.N.V.Kishore , Y. Hari Krishna, Muhammad Sarwar, |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
300 |
A STUDY ON THE PERFORMANCE OF KOTAK MAHINDRA BANK FOR PRE AND POSTPERIOD |
Kantamaneni HemaDivya. T, Goutham Reddy, Sai Sabareesh, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
301 |
PARAMETRIC ANALYSIS OF WIRE EDM PROCESS VARIABLES USING GREY ANALYSIS |
G. R. Sanjay Krishna, N. Naveen Kumar, V V S D S Aditya Koka, Padala Narendra, P. Chaitanya , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
302 |
A STUDY ON EFFECTIVENESS OF INDIAN BANKING OMBUDSMAN |
Kantamaneni HemaDivya, Koteshwar Reddy, Satyadev Kota, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
303 |
DIAGNOSIS OF GEARBOX FAULT USING ACOUSTIC SIGNAL |
G Diwakar , R Dileep , P Satya Nikhit, N H S Venkata sai, A Bala Krishna, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
304 |
STUDY ON PERFORMANCE OF DIESEL ENGINE BY USING COTTON SEED METHYL ESTERS ALONG WITH ADDITIVE AS ALTERNATIVE FUEL |
K. Srinivasa Reddy, P. Revanth , M. Yatheendar , J.S.V.M Teja , P.Rajavardhan Reddy, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
305 |
EXPERIMENTAL INVESTIGATION ON PEAK TEMPERATURE AND TENSILE STRENGTH DURING PLASMA ARC WELDING OF SS-316 |
Thella Babu Rao, Paleti Krishna Vamsi, Devula Sai Ram, Munjuluri Jagadeesh, Venu Pilli, P V Ramarao , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
306 |
AN EXPERIMENTAL INVESTIGATION ON A36 CARBON STEEL IN SUBMERGED ARC WELDED JOINTS |
Sachin Gupta, Sripati Varma Datla, Chandra Sekhar P, Nawaz Ali Shareef, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
307 |
DESIGN OF WEB BASED DECISION SUPPORT SYSTEM - MODEL STUDY OF VIJAYAWADA, A.P. |
D.Satish Chandra, SS. Asadi , M.V.S. Raju , |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
308 |
EVALUATION OF MAINTENANCE MANAGEMENT IN CONSTRUCTION TO REDUCE THE MAINTENANCE COST |
P. Bhargava Reddy, B.S.S. Ratnamala Reddy, SS. Asadi , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
309 |
OPTIMIZATION OF FRICTION STIR WELDING PARAMETERS DURING WELDING DISSIMILAR ALUMINIUM ALLOYS |
Thella Babu Rao, P.V. Rama Rao, V. Bala vamsi, A. Surya Chandra Babu, Pilli Venu, George Lin Prince, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
310 |
ENHANCEMENT OF REFRIGERATION EFFECT USING FLUE GASES FROM CHIMNEY |
Sukhvinder Singh, Chandra Pavan, Raghavendra , Lokesh kumar, Naveen Janjanam, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
311 |
MODELLING OF A SUSPENSION SYSTEM IN A CAR |
Karimulla Syed, CH. Hemanth Kumar, V. Praveen Sai, D. Bhanu Prasad, A. Ram Prasanna kumar, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
312 |
OPTIMIZATION OF PROCESS PARAMETERS IN CNC PLANE TURNING LATHE USING MATLAB |
R.K. Bhuyan , B. Rajiv Lekharaju, K.A.N.V. SwathiKiran , M. Naveen Kumar, K.V.R. Naveen Gupta, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
313 |
A STUDY ON FINANCIAL INCLUSION AWARENESS THROUGH PRADHAN MANTRI JAN-DHAN YOJANA IN GUNTUR DISTRICT |
Vedala Naga Sailaja, Uma Maheswara Rao T, |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
314 |
EFFECT OF THIN FILM COATING IN ARC WELDING OF LOW CARBON STEEL |
G.Arun Kumar, Y D S S Naveen , G.Pavan Kumar, P.Srinu Kameshwara Rao, R.Siva Sai Manohar, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
315 |
CREATION OF WEB BASED DECISION SUPPORT INFORMATION SYSTEM FOR EVALUATION OF TOPOGRAPHIC CHARACTERISTICS USING REMOTE SENSING & GIS AND VISUAL BASIC PROGRAME |
G.S. Sarma , SS. Asadi , S. Lakshmi Narayana, |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
316 |
CONDITION MONITORING OF TURBINE USING IOT |
A. S. R. Murty , K S S Satish , K V Narendra , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
317 |
IMPLEMENTATION OF LEAN METHODOLOGY IN INDIAN CONSTRUCTION |
P. Abhiram , SS. Asadi , A.V.S. Prasad , |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
318 |
AN INTEGRATED APPROACH FOR EVALUATION OF ENVIRONMENTAL IMPACT ASSESSMENT - A MODEL STUDY |
Varun Teja T, SS. Asadi , |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
319 |
SIMULTANEOUS OPTIMIZATION OF µ-EDM PARAMETERS FOR MACHINING INCONEL 718 SUPER ALLOY |
Thella Babu Rao, K. Dinesh Kumar Reddy, K. Bala Srikar, M. Prasanna Krishna, Ch. Pavan Kumar, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
320 |
THE CRITICAL SUCCESS FACTORS AFFECTING THE PERFORMANCE OF CONSTRUCTION INDUSTRY |
T. Anoop , SS. Asadi , A.V.S. Prasad , |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
321 |
LATHE PERFORMANCE MONITORING USING IOT |
A S R Murty , K.Teja , S.Naveen , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
322 |
A CRITICAL COMPARISON OF QUANTITY ESTIMATION FOR GATED COMMUNITY CONSTRUCTION PROJECT USING TRADITIONAL METHOD VS PLAN SWIFT SOFTWARE: A CASE STUDY |
Aditya Varma K.V, Manideep T , SS. Asadi , |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
323 |
COMPARATIVE STUDY OF THE MACHINING CHARACTERISTICS OF EN24 AND HARDENED EN24 DURING CNC TURNING |
R. K. Bhuyan , Pavan Kumar Akula, Guna Ranjan Chivukula, Brugumalla Mohan Sai, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
324 |
THE EFFECT OF EARNED VALUE MANAGEMENT ON RISK ASSESSMENT USING ANALYTICAL NETWORK PROCESS: A CASE STUDY |
G. Pavan Kumar, SS. Asadi , A.V.S. Prasad , |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
325 |
PARAMETRIC MODELING AND OPTIMIZATION OF KERF WIDTH DURING WEDM OF Al359/SiCp COMPOSITE |
Baburaja Kammuluri, Thella Babu Rao, Rajnish Srinivas Ganapathy, Avinash Yadavalli, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
326 |
ASSESSMENT OF GROUNDWATER POLLUTION ALONG THIPPAGUNTA DRAIN IN PRASADAMPADU, VIJAYAWADA RURAL, KRISHNA DISTRICT, ANDHRA PRADESH |
M. Sujatha , N. Rama Rao, T. Satyanarayana , SS. Asadi , K. Siva Kishore Babu, |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
327 |
POROSITY STUDIES ON ELECTRON BEAM WELDING OF COPPER ALLOYS |
Ramanujam T , Deva Sri H P, Gopi M , Shanmukh R , Chakravarthy K P K , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
328 |
AN INTEGRATED EVALUATION FOR FEASIBILITY STUDY OF MONORAIL AS MASS RAPID TRANSIT SYSTEM FOR VIJAYAWADA |
M. Avinash Reddy, J. Chandra Sekhar, SS. Asadi , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
329 |
FRICTIONAL LOSSES AND EFFICIENCY EVALUATION OF A PNEUMATICALLY DRIVEN TWO-WHEELER |
Y.V. Hanumantha Rao, A.S.R.Murty , K. Srinivasa Reddy, P. Divya Phanindra, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
330 |
DESIGN AND OPTIMIZATION OF GEOMETRICAL CHARACTERISTICS OF HELICAL SPRING USING FUSION 360 |
T.Tirumala Sandeep, K.Mani Bhushan, A.Lalith Sai Kumar, P.Satish kumar, A.Sai Ram Prasad, |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
331 |
AN ACCURATE CLASSIFICATION OF IMBALANCED STREAMING DATA USING DEEP CONVOLUTIONAL NEURAL NETWORK |
Yerremsetty Tayar, R.Siva Ram Prasad, S.Satayanarayana , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
332 |
ANALYSIS, INVESTIGATION AND TESTING OF ADAPTABILITY OF PLASMA ARC WELDING FOR MILD STEEL PLATES |
A Suresh , G. Diwakar , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
333 |
COILED TUBE HEAT EXCHANGERS - A REVIEW |
Sai Sarath Kruthiventi, Govindha Rasu N, Y.V. Hanumantha Rao, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
334 |
QUALITY OF WORK-LIFE IN EDUCATION SECTOR: WITH REFERENCE TO DEEMED UNIVERSITIES IN ANDHRA PRADESH |
Shahnaz Uddin, K.S. Sekhara Rao, |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
335 |
A STUDY ON HRD CLIMATE AND ITS IMPACT ON EMPLOYEE ENGAGEMENT IN ANDHRA BANK |
Sundari Dadhabai, P. Mounika , |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
336 |
FAULT DIAGNOSIS OF PUMP-MOTORSET BY USING CONDITION MONITORING AND IOT TECHNIQUE |
A S R Murty , Y.K.V Priya Ram, K. Sai Krishna, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
337 |
A SEMANTIC REVIEW ON OPERATIONS WITH FLY ASH WITH DIFFERENT APPROACHES IN REAL TIME |
Suresh Kommu, SS. Asadi , A.V.S. Prasad , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
338 |
ANALYSIS AND FABRICATION OF HEAT PIPE AND THERMOSYPHON |
M Sandeep , A.Abinay , Jamaleswara Kumar. P, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
339 |
AN ANALITICAL STUDY FOR EVALUATION OF FACTORS INFLUENCING THE CUSTOMERS TO UTILIZATION OF E-COMMERCE SITES |
K. Rajyalakshmi , D. Prasanna Kumar, SS. Asadi , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
340 |
MODAL ANALYSIS OF AN AUTOMOTIVE SUBSYSTEM USING CAE TECHNIQUES |
Kiran Kumar Dama, Sai Surya, Chandu Babu, Pavan , RamKiran , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
341 |
ADDAPTIVE CONTROL AND REALIZABILITY ON NABLA SETTINGS |
Y. Sobhanbabu , B. V. Appa Rao, T. Srinivasa Rao, K.A.S.N.V. Prasad , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
342 |
IMPACT OF FOREIGN INSTITUTIONAL INVESTMENT`S ON SENSEX MOVEMENTS |
Kafila , R. Vijaya Srinivas, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
343 |
INFLUENCE OF THERMAL DUST AS AN ADMIX IN CONCRETE MIX |
Ch. Mallika Chowdary, I. Siva Kishore, |
Volume 7,Issue 4,Year 2016 |
International Journal of Civil Engineering and Technology |
344 |
AEROTHERMODYNAMIC TOPOLOGY OPTIMIZATION OF HYPERSONIC RE-ENTRY VEHICLE WITH AEROSPIKE BY USING CFD |
Harish Panjagala, E L N Rohit Madhukar, I Ravi Kiran, V Shashank , Sai Venkata Bharadwaj, |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
345 |
EXPERIMENTAL INVESTIGATION ON DIESEL ENGINE USING JATROPHA BIO DIESEL BLENDS WITH AIR PRE-HEATING |
N. Satyanarayana , B R Bundel , Y.V. Hanumantha Rao, Chinthala Naveen Kumar, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
346 |
TEST CASE SELECTION USING LOGISTIC REGRESSION PREDICTION MODEL |
Kiran Jammalamadaka, V Ramakrishna , |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
347 |
REMOTE SENSING AND GIS BASED LAND UTILIZATION ANALYSIS: A MODEL STUDY FROM VAMSADHARA RIVER BASIN |
Kallakunta Ravi Kumar, SS. Asadi , Venkata Ratnam Kolluru, |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
348 |
REMOTE SENSING AND GIS BASED CRITICAL EVALUTION OF WATER BALANCE STUDY FROM WOOCHU WATERSHED, BHUTAN |
SS. Asadi , Abel Dungana, Paras Mani Ghalley, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
349 |
A STUDY ON ENGINEERING STUDENTS AWARENESS AND MYTHS ABOUT CHICKENPOX IN GUNTUR, ANDHRA PRADESH |
B. Kishore Babu, M V A L Narasimha Rao, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
350 |
GENERAL SURVEY ON IMPLEMENTATION OF SECURITY IN IOT |
Mohan Kumar Ch, Shaik Shahbaz, Manikanta Varma, Tanu Shri, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
351 |
STUDY ON THE PERFORMANCE ANALYSIS OF FOUR STROKE SINGLE CYLINDER DIESEL ENGINE FUELLED WITH TOBACCO SEED METHYL ESTERS AND CASTOR SEED METHYL ESTERS. |
K.Srinivasa Reddy, T.T.Sandeep , Y.V. Hanumantha Rao, |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
352 |
DESIGN AND ANALYSIS OF HIGH-PRESSURE CASING OF A STEAM TURBINE |
Chelamalasetti Pavan Satyanarayana, Y.V. Hanumantha Rao, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
353 |
DESIGNEE OF WATER HARVESTING STRUCTURES FOR WATER RESOURCES MANAGEMENT: A MODEL STUDY FROM CHELILA WATERSHED, BHUTAN |
SS. Asadi , N.Vijay Kumar, K. Rajyalakshmi , M. Satish Kumar, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
354 |
A STUDY ON DATA ANALYSIS OF MOVIE TWEETS USING MACHINE LEARNING TECHNIQUES |
M.Yaswanth Reddy, V.Bhavana , P.Yeshwanth , M.V.B.T. Santhi , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
355 |
GEOSPATIAL BASED ANALYSIS OF TOPOGRAPHICAL FEATURES FOR RESOURCES MANAGEMENT: A MODEL STUDY FROM BHUTAN |
SS. Asadi , M.V. Raju , M.Sujatha , K. Rajyalakshmi , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
356 |
ESTIMATION OF BEARING CAPACITY OF BLACK COTTON SOIL USING ROCK DUST AND GEO-TEXTILE SHEET: AN EXPERIMENTAL STUDY |
N. Vijay Kumar, SS. Asadi , A.V.S. Prasad , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
357 |
A STUDY ON FACTORS INFLUENCE TOWARDS E-COMMERCE |
P. Phani bhaskar, D. Prasanna Kumar, |
Volume 8,Issue 9,Year 2017 |
International Journal of Mechanical Engineering and Technology |
358 |
OPTIMIZED AND SECURED STORAGE APPROACH FOR IOT BASED APPLICATIONS |
M. Tanooj Kumar, S.L. Narayana Reddy, B. Katyayini , Sk. Shabana Azmi, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
359 |
APPLICATION OF FUZZY DIFFERENTIAL EQUATIONS FOR COOLING PROBLEMS |
Ch. Vasavi , G. Suresh Kumar, T. Srinivasa Rao, B. V. Appa Rao, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
360 |
CFD ANALYSIS ON NANO FLUIDS TURBULENT CONVECTION HEAT TRANSFER |
Tunguntla Samuel, Y.V Hanumantha Rao, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
361 |
PROTECTION OF ENCROACHMENT ON BIGDATA ASPEC |
Sirisha N , K.V.D Kiran , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
362 |
COMPARATIVE STUDY ON SECURITY THREATS IN MOBILES AND IOT DEVICES |
Mohan Kumar Ch, Neha Shikha, S.L. Sowndarya , N.A. Ramarao , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
363 |
A FRAMEWORK USING BIG DATA ANALYSIS ON HUMAN ACTIVITY PATTERNS FOR HEALTH PREDICTION |
Anjali Mathur, V Vaishnavi , K Jigeesha , K S V A G Sudheer , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
364 |
DEVELOPMENT OF FUSION BIOMETRIC SYSTEM FOR ATM MACHINES |
S. Balaji , M. Janga Reddy, Habibullah Khan, K. Mounika , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
365 |
SURVEY OF ALGORITHMIC TRADING STRATEGIES IN EQUITIES AND DERIVATIVES |
Rajan Lakshmi A, Vedala Naga Sailaja, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
366 |
INDUSTRIAL EXPOSURE TRAINING IN HOTELS AND ITS IMPACT ON UNDER GRADUATE STUDENTS - CHALLENGES AND REMEDIES |
Kiran Mayi Immaneni, Vedala Naga Sailaja, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
367 |
INFLUENCE OF STEEL FIBERS AS ADMIX IN NORMAL CONCRETE MIX |
I. Siva Kishore, Ch. Mallika Chowdary, |
Volume 7,Issue 1,Year 2016 |
International Journal of Civil Engineering and Technology |
368 |
SMART SOLID WASTE MANAGEMENT SYSTEM BY IOT |
G.Vaisali , K.Sai Bhargavi, Satish Kumar, S.Satyanarayana , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
369 |
PERFORMANCE INVESTIGATION OF WATER AND PROPYLENE GLYCOL MIXTURE BASED NANO-FLUIDS ON AUTOMOTIVE RADIATOR FOR ENHANCEMENT OF HEAT TRANSFER |
K. Jagadishwar , S. Sudhakar Babu, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
370 |
EVALUATION OF URBAN WATER SUPPLY SYSTEM FOR SUSTANABLE MANAGEMENT: A MODEL STUDY |
Akhil Gurijala, SS. Asadi , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
371 |
HEAT TRANSFER ENHANCEMENT IN 2S-2T SHELL AND TUBE HEAT EXCHANGER WITH WIRE COIL AND TWISTED TAPE TURBULATORS USING TIO2 NANOFLUID |
M P S Bharadwaj , S. Sudhakar Babu, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
372 |
ESTIMATION OF SOIL EROSION STATUS FOR LAND RESOURCES MANAGEMENT USING REMOTE SENSING AND GIS: A MODEL STUDY FROM A.P |
Ravi Kumar Kallakunta, SS. Asadi , Venkata Ratnam Kolluru, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
373 |
A STUDY ON WASTE UTILIZATION OF MARBLE DUST IN HIGH STRENGTH CONCRETE MIX |
I. Siva Kishore, Ch. Mallika Chowdary, |
Volume 6,Issue 12,Year 2015 |
International Journal of Civil Engineering and Technology |
374 |
DESIGN AND FABRICATION OF MULTI FUNCTIONAL PEDAL OPERATED MACHINE |
M. Sandeep , S. Kiran , Jamaleswara Kumar. P, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
375 |
AUTHENTICATION FRAMEWORKS FOR ENHANCING SECURITY IN BIOMETRIC SYSTEMS |
S. Balaji , Habibullah Khan, M. Janga Reddy, M. Gurunadha Babu, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
376 |
EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER AUGMENTATION USING ZNO-PROPLYENE GLYCOL NANOFLUIDS IN A AUTOMOBILE RADIATOR |
P. Kumar Sai Tejes, Y. Appalanaidu , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
377 |
ANALYSIS AND ESTIMATION OF HAZARDOUS COMPONENTS IN DRINKING WATER IN AND AROUND OF HYDERABAD: A MODEL STUDY |
Akhil Gurijala, SS. Asadi , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
378 |
DC-DC CONVERTERS FOR TELECOM POWER SUPPLY APPLICATIONS |
P. Hari Krishna Prasad, M. Venu Gopal Rao, |
Volume 3,Issue 1,Year 2012 |
International Journal of Electrical Engineering and Technology |
379 |
INVESTIGATION OF FLEXURAL STRENGTH FOR CARBON REINFORCED ALUMINIUM NANO COMPOSITE |
G.Arun Kumar, Sinisetty Surya, G.Santhosh Naidu, G.Phanindra , Y.Gangaraju , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
380 |
MAGNETIC LEVITATION VEHICLE-SUPPORTING GRAVITATIONAL AND ELECTROMAGNETIC PRINCIPLES, THEORIES FOR DESIGNERS |
Manjeet Kumar Tummalapalli, Srujan Roha Kommula, Bhargava Sai Edara, Sai Pradeep Pativada, Aravind Perabathula, A S R Murty , |
Volume 7,Issue 6,Year 2016 |
International Journal of Mechanical Engineering and Technology |
381 |
CHEST COMPRESSION FOR CARDIOPULMONARY RESUSCITATION WITH A 3-PRR PARALLEL MANIPULATOR |
T. Dharniju Reddy, G. Yedukondalu , |
Volume 7,Issue 6,Year 2016 |
International Journal of Mechanical Engineering and Technology |
382 |
PNEUMATICALLY DRIVEN VEHICLE WITH RECHARGEABLE BATTERY DURING DRIVE- AN EXPLORATORY STEP IN ADDRESSING ENVIRONMENTAL POLLUTION |
U Guru Sri Charan, P.D Phanindra , A.S.R.Murty , |
Volume 7,Issue 3,Year 2016 |
International Journal of Mechanical Engineering and Technology |
383 |
OCTAVE WAVE SOUND SIGNAL MEASUREMENTS IN DUCTED AXIAL FAN UNDER STALL REGION AT THROTTLE POSITION 3 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 3,Year 2012 |
International Journal of Mechanical Engineering and Technology |
384 |
OCTAVE WAVE SOUND SIGNAL MEASUREMENTS IN DUCTED AXIAL FAN UNDER STABLE REGION AT THROTTLE POSITION 6 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 3,Year 2012 |
International Journal of Mechanical Engineering and Technology |
385 |
ACTIVE INSTABILITY CONTROL IN DUCTED AXIAL FAN USING C PROGRMMING |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 3,Year 2012 |
International Journal of Mechanical Engineering and Technology |
386 |
TIME DOMAIN SOUND SPECTRUM MEASUREMENTS IN DUCTED AXIAL FAN UNDER STALL REGION AT THROTTLE POSITION 3 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 3,Year 2012 |
International Journal of Mechanical Engineering and Technology |
387 |
PNEUMATICALLY DRIVEN TWO WHEELER- AN EXPLORATION AT DESIGN PARAMETERS AND EXTRA POSSIBLE BENEFITS |
Divya Phanindra Parise, A S R Murty , |
Volume 7,Issue 5,Year 2016 |
International Journal of Mechanical Engineering and Technology |
388 |
DESIGN AND ESTIMATION OF RURAL ROAD IN VADDESWARAM |
D.Satish Chandra, Arjun Chhetri, Sonam Wangchen, Sri.Harsha Yadagani, |
Volume 4,Issue 2,Year 2013 |
International Journal of Civil Engineering and Technology |
389 |
STRUCTURAL HEALTH MONITORING OF CONCRETE STRUCTURES EVALUATING ELASTIC CONSTANTS AND STRESS-STRAIN PARAMETERS BY X-RAY DIFFRACTION TECHNIQUE |
N. K. Dhapekar , |
Volume 5,Issue 1,Year 2014 |
International Journal of Civil Engineering and Technology |
390 |
FUZZY SERVICE QUALITY EVALUATION OF HEALTH CARE SECTORS |
P.S. Prema Kumar, G. Rambabu , |
Volume 10,Issue 4,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
391 |
NEURAL DETECTION OF PIPE THROUGH GROUND PENETRATING RADAR IMAGES |
Chalasani srinivas, |
Volume 8,Issue 5,Year 2017 |
International Journal of Advanced Research in Engineering and Technology |
392 |
OCTAVE WAVE SOUND SIGNAL MEASUREMENTS IN DUCTED AXIAL FAN UNDER STALL REGION AT THROTTLE POSITION 4 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 2,Year 2012 |
International Journal of Advanced Research in Engineering and Technology |
393 |
OCTAVE WAVE SOUND SIGNAL MEASUREMENTS IN DUCTED AXIAL FAN UNDER STABLE REGION AT THROTTLE POSITION 7 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 2,Year 2012 |
International Journal of Advanced Research in Engineering and Technology |
394 |
TIME DOMAIN SOUND SPECTRUM MEASUREMENTS IN DUCTED AXIAL FAN UNDER STABLE REGION AT THROTTLE POSITION 6 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 2,Year 2012 |
International Journal of Advanced Research in Engineering and Technology |
395 |
BENEFITS OF FDI IN INDIAN RETAIL SECTOR AND CUSTOMER PERCEPTION OF ORGANIZED RETAIL OUTLETS IN HYDERABAD |
K.Venkateswara Raju, SVSS Srinivasa Raju, D.Prasanna Kumar, |
Volume 4,Issue 4,Year 2013 |
International Journal of Management |
396 |
AN ANALYSIS OF CRATER DETECTION IN MOON |
Arpita Baronia, Jyoti Sarup, Sumit Gupta, |
Volume 9,Issue 13,Year 2018 |
International Journal of Civil Engineering and Technology |
397 |
INFLUENCE OF BOOSTER CHLORINATION ON BALANCE IN QUALITY OF WATER DISTRIBUTION NETWORKS |
M.S.D. Hima Bindu, K.Rajasekhara Reddy, G.V.K.S.V. Prasad , |
Volume 9,Issue 8,Year 2018 |
International Journal of Civil Engineering and Technology |
398 |
ASSESSMENT OF HEAVY METAL CONCENTRATIONS AND SUITABILITY STUDY OF GROUND WATER (BORE WELLS) QUALITY FOR CONSTRUCTION PURPOSE: A MODEL STUDY |
Cyril Lucy Monica, M.V. Raju , D. Vinay Kumar, S. Ramesh Babu, SS. Asadi , |
Volume 9,Issue 9,Year 2018 |
International Journal of Civil Engineering and Technology |
399 |
ASSESSMENT OF PHYSICO-CHEMICAL CHARACTERISTICS AND SUITABILITY STUDY OF GROUND WATER FOR DOMESTIC PURPOSE: A MODEL STUDY |
Cyril Lucy Monica, M.V. Raju , D.Vinay Kumar, S. Ramesh Babu, SS. Asadi , |
Volume 9,Issue 9,Year 2018 |
International Journal of Civil Engineering and Technology |
400 |
EFFECT OF BRACINGS IN CONTROLLING THE STRUCTURAL RESPONSE UNDER SEISMIC FORCE |
G. Sai Prasanna Kumar Reddy, V. Ranga Rao, A. Venkateswara Rao, |
Volume 9,Issue 7,Year 2018 |
International Journal of Civil Engineering and Technology |
401 |
DAMAGE ASSESEMENT CURVES FOR RC FRAMED STRUCTURES UNDER SEISMIC LOADS |
Bhavani Chowdary. T, kishore Babu. D, Vummaneni Ranga Rao, |
Volume 9,Issue 8,Year 2018 |
International Journal of Civil Engineering and Technology |
402 |
Numerical simulations of Darcy -Forchhiemer flow explored with carbon nanotubes under activation energy |
P S S Nagalakshmi , N Vijaya , |
Volume 14,Issue 20,Year 2021 |
Indian Journal of Science and Technology |
403 |
INTELLIGENT TRANSPORT SYSTEM |
Y.R.V.S.Chandra , M.Shiva Harun, T.Reshma , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
404 |
DESIGN OF FLEXIBLE PAVEMENTS BY USING GEO GRIDS GEO CELLS ANDGEO MEMBRANES |
S.Mario Neelkamal, K. Hemantha Raja, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
405 |
A REMOTE SENSING AND GIS BASED CRITICAL EVALUATION OF CHANGE DETECTION STUDY IN THIMMAIPALLY WATERSHED FOR LAND RESOURCES MANAGEMENT |
B. Ramyaa Sree, SS. Asadi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
406 |
EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF CEMENT BY BAGASSE ASH IN CONCRETE MIX WITH GLASS FIBRE AS ADMIXTURE |
B.Aravind Yadav, M.Harinadh , V.Sree Lakshmi, I.Siva Kishore, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
407 |
ANALYSIS AND DESIGN OF G+5 RESIDENTIAL BUILDING BY USING E-TABS |
K. Naga Sai Gopal, N. Lingeshwaran , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
408 |
ANALYSIS OF ROUGHNESS INDEX OF A FLEXIBLE PAVEMENT USING LOW COST INSTRUMENTATION |
M. Jagadeesh Babu, B.G. Rahul , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
409 |
ASSESSMENT OF QUALITY CONTROL AND ASSURANCE OF CONSTRUCTION PROJECT: A MODEL STUDY FROM GUNTUR MUNICIPALITY IN A.P |
V.Hemalatha , J.Raghunath Reddy, T.Naga Seshu Babu, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
410 |
STUDY ON STABILIZATION OF BLACK COTTON SOILS USING CEMENT FLYASH AND GGBS |
B. Rajendra , k. Siva gopi, Ch. Hanumantha Rao, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
411 |
EFFECT OF SODIUM HYDROXIDE AND SODIUM SILICATE SOLUTION ON COMPRESSIVE STRENGTH OF METAKAOLIN AND GGBS GEOPOLYMER |
K.Nagendra Reddy, K.Surya Narayana, J.Damodhar Reddy, B. Sarath Chandra, Y. Himath Kumar, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
412 |
COMPARATIVE STUDY ON COMPRESSIVE STRENGTH OF FLY ASH CONCRETE |
M.S. Krishna Hygrive, I. Siva Kishore, KJB Chari , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
413 |
STABILIZATION OF EXPANSIVE SOIL USING BAGASSE ASH |
K.Srinivasa Reddy, Sai Vivek P, Syam Chamberlin K, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
414 |
ANALYSIS OF STRUCTURE WITH THE PILE FOUNDATION ON LOW SAFE BEARING CAPACITY OF SOILS |
K. Vasudhar , CH. Rama Krishna, Afshan sheikh, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
415 |
EVALUATION OF QUALITY MANAGEMENT TECHNIQUES IN CONSTRUCTION PROJECTS: A MODEL STUDY |
S.Chandra Mouli, K.Rajasekhara Reddy, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
416 |
A CRITICAL SWOT ANALYSIS FOR SMART CITY PLANNING: A MODEL STUDY FROM ELURU CITY |
B.Gopala Krishna Reddy, Y.Harsha , N.Lingeshwaran , SS. Asadi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
417 |
FLEXIBLE PAVEMENT EVALUATION AND OVERLAY DESIGN |
R.V.R.Laya , B.Jyothsna , B.G.Rahul , K. Hemantha Raja, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
418 |
WEATHER ANALYTICS USING MAP REDUCE TECHNIQUE |
C.V.S.Adithya , N.Vijaya Sai, B.Thirumala Rao, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
419 |
STRENGTH CHARACTERISTICS OF FIBRE REINFORCED CONCRETE USING RECYCLED PET |
Y. Dinesh , Ch. Hanumantha Rao, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
420 |
ENHANCING THE WEB SITE STRUCTURE TO PROVIDE EASY TRAVERSAL ON A WEB SITE WITH MINIMUM CHANGES TO ITS CURRENT STRUCTURE |
B. Ramyaa Sree, Ubale S. A. , Modani D. G. , Bhandare P.S. , |
Volume 5,Issue 1,Year 2014 |
International Journal of Computer Engineering and Technology |
421 |
STABILIZATION OF DEBRIS MATERIAL BY USING SOIL |
Y. Ravikanth , B. Tejaram , B.G. Rahul , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
422 |
SEISMIC STUDY OF G+5 RC FRAMED STRUCTURE SUPPORTED ON RAFT FOUNDATION |
B. Akash Singh, N. Lingeshwaran , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
423 |
EFFECT OF STRENGTH PARAMETERS IN CONCRETE WITH PARTIAL REPLACEMENT OF CEMENT USING HYPO SLUDGE BY ADDING FIBERS |
Y. Suneel Kumar, K.J. Brahma Chari, N. Srujana , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
424 |
ESTIMATION ANALYSIS OF RUNOFF FOR UDAYGIRI MANDAL USING A POTENTIAL METHOD: A MODEL STUDY |
A. Manikanta Sai, K. Sanjeev Rahul, B. Mohanty , SS. Asadi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
425 |
STUDY ON STRENGTH PROPERTIES OF CONCRETE BY PARTIALLY REPLACING CEMENT WITH GGBS |
V. Vinod , B. Susheel , K. Mahindra , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
426 |
EFFECT ON STRENGTH PROPERTIES OF CONCRETE BY PARTIAL REPLACEMENT OF CEMENT WITH CALCIUM BENTONITE AND FLY ASH |
B. Praveen Kumar, V. Ranga Rao, M. Achyutha Kumar Reddy, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
427 |
STABILIZATION OF SOFT SOIL USING CHICKEN FEATHERS AS BIOPOLYMER |
N. Manoj , G. Madhusudhanrao , B. Sairam , Ch. Hanumantha Rao, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
428 |
BEHAVIOUR OF SOFT STOREY RC FRAMED BUILDING UNDER SEISMIC LOADING |
B. Lalitha Chandrahas, P. Polu Raju, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
429 |
DIGITALIZE WITNESSING THE ALLY OF CASH? |
P. Madhu Kumar Reddy, A. Rama Kumar, M.Radhika , |
Volume 6,Issue 1,Year 2021 |
Indian Journal of Finance and Banking |
430 |
AIR POLLUTION MONITORING USING ZIGBEE BASED WIRELESS SENSOR NETWORKS |
K. Raghava Rao, Monika Vallabhaneni, Srikanth Narayanaraju, Rajendra Kumar Jonnalagadda, Sunilkumar kanaparthi, |
Volume 5,Issue 5,Year 2014 |
International Journal of Electronics and Communication Engineering and Technology |
431 |
EXPERIMENTAL STUDY ON BACTERIAL CONCRETE WITH PARTIAL REPLACEMENT OF CEMENT BY FLY ASH |
R. Sri Bhavana, P. Polu Raju, SS. Asadi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
432 |
COMPARATIVE STUDY ON EFFECT OF STEEL AND GLASS FIBERS ON COMPRESSIVE AND FLEXURAL STRENGTH OF CONCRETE |
S. Ghouse Basha, P. Polu Raju, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
433 |
PERFORMANCE BASED SEISMIC DESIGN OF RC FRAMED BUILDING |
Rohit Ranjan Singh, P. Polu Raju, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
434 |
CREATION OF QUERY BASED DECISION SUPPORT SYSTEM FOR SELECTION OF PIPELINE CORRIDOR SITE USING RS & GIS: A MODEL STUDY |
Y Ranjith Kumar, M Akhil gopinadh, B Mohanty , SS. Asadi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
435 |
EXPERIMENTAL STUDY ON STRENGTH AND DURABILITY PROPERTIES OF GPC WITH GGBS |
N. Veerendra Babu, B.G. Rahul , Y. Himath Kumar, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
436 |
EFFECT OF FLY ASH ON MECHANICAL PROPERTIES OF M30 AND M60 GRADE CONCRETE |
A. Venkateswara Rao, K. Srinivasa Rao, |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
437 |
A Framework to Score the Risk Associated with Suspicious Money Laundering Activity and Social Media Profile |
Dillip Kumar Parida, D. Prasanna Kumar, |
Volume 4,Issue 2,Year 2020 |
Indian Journal of Finance and Banking |
438 |
DESIGN AND ESTIMATION OF ECO FRIENDLY RIGID PAVEMENT WITH GEO PLASTIC BRICKS IN RURAL AREAS |
Sankuru Naresh, SS. Asadi , A.V.S. Prasad , |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
439 |
BLAST ANALYSIS AND BLAST RESISTANT DESIGN OF R.C.C RESIDENTIAL BUILDING |
M. Meghanadh , T.Reshma , |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
440 |
AN EXPERIMENTAL STUDY OF SENSOR BASED SMART STRUCTURE DESIGN: A MODAL STUDY |
Konduru Uday Kumar, Shaik Niha Boby, Subratha Ghoshal, SS. Asadi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
441 |
A STUDY ON DEVELOPMENT OF LOW COST ENVIRONMENTAL FRIENDLY AND SUSTAINABLE IRRIGATION TECHNIQUES |
D. Deepthi , E. Vasavi , K. Pravallika , P. Swathi , K. Rajasekhara Reddy, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
442 |
EVALUATION OF WATER QUALITY ROLE ON ENVIRONMENTAL IMPACT ASSESSMENT STUDY |
SS. Asadi , Ramya.Aduri , Kowmudhi.Bachinappa , |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
443 |
PERFORMANCE EVOLUTION OF BITUMUNOUS MIXES USING COIR GEOTEXTILES |
A. Siva Teja, K. Keshav Prasad, B.G. Rahul , K. Hemantha Raja, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
444 |
EVALUATION OF RECYCLED AGGREGATES & FLY ASH USED IN FLEXIBLE PAVEMENTS: A MODEL STUDY |
Sai Venkatesh N, Praveen Reddy M, K. Hemantha Raja, M L Sai Ranga Rao, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
445 |
COMPRATIVE STUDY OF REINFORCED SOIL OF BIDAR DIRSTIC WITH GEOGRID-1, GEOGRID-2 & GEO-MEMBRANE |
N.Vijay Kumar, SS. Asadi , A.V.S. Prasad , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
446 |
PREPARATION OF SOIL ANALYSIS FOR CONSTRUCTION OF COMMERCIAL COMPLEX: A MODEL STUDY |
SS. Asadi , Ravali Koppula, Varikunta Bhargavi Sai, M.V. Raju , |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
447 |
AN INTEGRATED APPROACH FOR SITE SELECTION BY USING REMOTE SENSING AND DESIGN OF GROUP HOUSES IN AND AROUND VIJAYAWADA: A MODEL STUDY |
P.Lakshmi , SS. Asadi , P. Polu Raju, D. Sathish Chandra, |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
448 |
EFFECT OF MOLARITY ON COMPRESSIVE STRENGTH OF GEOPOLYMER MORTAR WITH GGBS AND METAKAOLINE |
S. Sai Sandeep, Sk. Kalesha , Y. Himath Kumar, B. Sarath Chandra Kumar, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
449 |
PLANNING, ANALYSIS AND SCHEDULING OF AFFORDABLE GREEN HOUSING-A MODEL STUDY |
Y V Satish , Afshan sheikh, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
450 |
ANALYSIS OF SOIL QUALITY FOR ENVIRONMENTAL IMPACT ASSESSMENT -A MODEL STUDY |
SS. Asadi , Kunati Lahari, Koka.Sai Madhulika, |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
451 |
FINITE ELEMENT ANALYSIS OF LAMINATED HYBRID COMPOSITE PRESSURE VESSELS |
Eswara Kumar. A, G R Sanjay Krishna, Shahid Afridi. P, Nagaraju. M , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
452 |
ASSESSMENT AND EVALUATION OF FLUORIDE CONCENTRATION IN GROUNDWATER OF PALNADU REGION: A MODEL STUDY |
SS. Asadi , Aswitha.Kammela , Hari Chandana.Lella, M.V. Raju , |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
453 |
FREQUENT NEGATIVE SEQUENTIAL PATTERNS -A SURVEY |
Sujatha Kamepalli, Raja Sekhara Rao Kurra, |
Volume 5,Issue 3,Year 2014 |
International Journal of Computer Engineering and Technology |
454 |
PREPARATION OF MODEL URBAN ACTION PLAN FOR EFFECTIVE ENVIRONMENTAL MANAGEMENT: A CASE STUDY FROM A.P |
P. Krishnamraju , S. Shahabas , SS. Asadi , |
Volume 8,Issue 2,Year 2017 |
International Journal of Civil Engineering and Technology |
455 |
STRENGTH PROPERTIES OF FLYASH BASED GEOPOLYMER CONCRETE |
V.Sowjanya , N. Srujana , |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
456 |
EXPERIMENTAL STUDY ON BACTERIAL RICE HUSK ASH CONCRETE BY INCORPORATING QUARRY DUST AS PARTIAL REPLACEMENT OF FINE AGGREGATE |
K. Nagajyothi , K. Shyam Chamberlin, SS. Asadi , M. Maheswara Reddy, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
457 |
EFFECT OF SOIL INTERACTION ON 3×3 BUILDING FRAME EMBEDDED IN MULTILAYERED SOIL |
G. Anugna Sai, N. Jitendra Babu, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
458 |
BEHAVIOR OF BUILDING FRAMES ON SOILS OF VARYING PLASTICITY INDEX |
Sai Kumar V B Y, Ch. Hanumantha Rao, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
459 |
AN EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF CEMENT WITH BAGASSE ASH IN CONCRETE MIX |
K. Kiran , I. Siva Kishore, |
Volume 8,Issue 1,Year 2017 |
International Journal of Civil Engineering and Technology |
460 |
ANALYSING DELAY FACTORS IN INDIAN AFFECTING CONSTRUCTION PROJECTS |
Veera Vijay. Divi, Sundara Kumar. P, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
461 |
EXPERIMENTAL INVESTIGATION OF THE SPECTRAL BEHAVIOR OF NODULAR CAST IRON BY VARIATION OF COPPER COMPOSITIONS |
Arun Kumar G, Sesh Kalyan.Dasari, Morampudi.Karthik , Vadlamudi.Chandra Sekhar, Egalapati.Hemanth Eswar, Rabbani.Shaik , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
462 |
STRENGTH AND BEHAVIOR OF HIGH VOLUME FLY ASH AND REPLACEMENT OF SAND BY QUARRY DUST |
Y. Mahesh Babu, P. Sundara Kumar, |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
463 |
ANALYSING AND DESIGNING OF A HIGH RISE BUILDING (G+10) BY STAAD.PRO |
T. Sasidhar , T.B.Manideep , I. Siva Kishore, N. Surjana , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
464 |
Facial expression recognition for low resolution images using convolutional neural networks and denoising techniques |
Pavan Nageswar Reddy Bodavarapu, P V V S Srinivas , |
Volume 14,Issue 12,Year 2021 |
Indian Journal of Science and Technology |
465 |
PUSHOVER ANALYSIS OF RC BUILDING: COMPARATIVE STUDY ON SEISMIC ZONES OF INDIA |
V. Mani Deep, P. Polu Raju, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
466 |
ANALYSIS OF MOBILE TECHNOLOGY SWITCHING BEHAVIOR OF CONSUMER USING CHI-SQUARE TECHNIQUE: A MODEL STUDY FROM HYDERABAD |
D. Prasanna Kumar, K. Rajyalakshmi , SS. Asadi , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
467 |
AN EXPERIMENTAL STUDY FOR EVALUATION OF TIME AND COST DRIVEN FACTORS ANALYSIS OF A COMMERCIAL COMPLEX |
SS. Asadi , Chandrahas Sai B, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
468 |
MANUAL ANALYSIS AND DESIGN OF POST TENSIONED PRE-STRESSED CONCRETE T-BEAM SEGMENT BRIDGE USING PROTO-TYPE MODEL |
Palden Humagai, Pavan Kumar Peddineni, C. Rajamallu , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
469 |
REMOVAL OF HEAVY METALS FROM INDUSTRIAL WASTE WATER USING COCONUT COIR |
Ch. Aravind , K. Chanakya , K. Mahindra , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
470 |
ANALYSIS AND DESIGN OF G+4 RESIDENTIAL BUILDING USING ETABS |
C.V.S. Lavanya , Emily P.Pailey, Md. Mansha Sabreen, U.P.B.C. Sekhar , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
471 |
Mapping and Visualization of Source Code: A Survey |
Nakul Sharma, Prasanth Yalla, |
Volume 21,Issue 4,Year 2020 |
International Journal of Simulation: Systems, Science and Technology |
472 |
METHODS OF SEISMIC RETROFITTING BY USING ETABS SOFTWARE |
Abdul Kalam, Muzeera Babu SK, Lingeshwaran N , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
473 |
STUDY OF STRENGTH PARAMETERS ON CONCRETE WITH PARTIAL REPLACEMENT OF CEMENT BY SODIUM POLYACRYLATE AND FLY ASH |
U. Srinivasa Rao, M. Suresh Babu, |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
474 |
MODELLING AND ANALYSIS OF REINFORCED CONCRETE BEAM UNDER FLEXURE USING ANSYS |
Diyyala Naga Moulika, Reshma Vasireddy, P. Polu Raju, |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
475 |
COMPARATIVE STUDY ON COMPRESSIVE AND FLEXURAL STRENGTH OF STEEL FIBRE REINFORCED CONCRETE (SFRC) USING FLY ASH |
Sayyad Khaseem Babu, P. Venkata Sarath, P. Polu Raju, |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
476 |
ESTIMATION OF WATER QUALITY INDEX BY WEIGHTED ARITHMETIC WATER QUALITY INDEX METHOD: A MODEL STUDY |
D. Satish Chandra, SS. Asadi , M.V.S. Raju , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
477 |
PARTIAL REPLACEMENT OF BITUMEN WITH GLASS FIBER IN FLEXIBLE PAVEMENT |
K. Sri Harsha, M. Nikhil , K. Hemantha Raja, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
478 |
CONSTRUCTION OF A BUILDING USING FLY ASH CONCRETE |
Syed Saifali, R. Akhil , S. Lakshmipathi , Afshan sheikh, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
479 |
STRENGTHENING OF CONTAMINATED SOIL AT TADEPALLI REGION BY USING CEMENT AS STABILIZING AGENT |
Satya Ravi Teja G, Bala Raju T, Syam Chamberlin K, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
480 |
ESTIMATION OF RUNOFF FOR AGRICULTURAL UTILIZATION USING GEOINFORMATICS: A MODEL STUDY FROM TELANGANA STATE |
M. V. Raju , SS. Asadi , M. Satish Kumar, Hepsibah Palivela, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
481 |
EFFECT OF BASE ISOLATION IN MULTISTORIED REINFORCED CONCRETE BUILDING |
M. Rajesh Reddy, N. Srujana , N. Lingeshwaran , |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
482 |
A SYSTEMATIC APPROACH FOR EVALUATION OF RISK MANAGEMENT IN ROAD CONSTRUCTION PROJECTS - A MODEL STUDY |
R. Prasanna Kumar, Afshan sheikh, SS. Asadi , |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
483 |
USE OF INDUSTRIAL WASTES IN THE CONSTRUCTION OF FLEXIBLE PAVEMENTS |
K. Sunil , K. Sahithi , T. Reshma , K. Hemantha Raja, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
484 |
PARTIAL REPLACEMENT OF CEMENT BY FLYASH IN POROUS CONCRETE |
G. Ravi Teja, M. L. Sai Ranga Rao, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
485 |
ANALYSIS OF AIR QUALITY FOR ENVIRONMENTAL MANAGEMENT: A MODEL STUDY FROM TALANGANA STATE |
SS. Asadi , Ravali Koppula, Sravanth. B Sambaturu, K.Aswitha , M.V. Raju , |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
486 |
CREATION OF AN INTEGRATED OPTIMAL URBAN DRAINAGE NETWORK PLANNING AND ANALYSIS OF CHAMBERED SEWAGE TREATMENT PLANT: A MODEL STUDY FROM PART OF VIJAYAWADA, AP |
S. Sai Sree, SS. Asadi , P. Polu Raju, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
487 |
ANALYSIS OF NOISE QUALITY FOR ENVIRONMENTAL MANAGEMENT: A MODEL STUDY FROM TELANGANA STATE |
SS. Asadi , Sravanth. B Sambaturu, Ravali Koppula, L. Hari Chandana, M.V. Raju , |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
488 |
SEISMIC ANALYSIS OF FRAMED STRUCTURES WITH AND WITHOUT FLOATING COLUMNS |
SK. Abdul Rehaman, M. Suresh Babu, |
Volume 8,Issue 3,Year 2017 |
International Journal of Civil Engineering and Technology |
489 |
STRENGTH AND BEHAVIOUR OF CONCRETE BY USING NATURAL AND ARTIFICIAL FIBRE COMBIATIONS |
S. Suresh , M. Sai Charan, I.Siva Kishore, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
490 |
HYPO SLUDGE AS A PARTIAL REPLACEMENT OF CEMENT IN CONCRETE |
Katru Sai Teja, Koduru Uday Kumar, P. Venkata Sarath, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
491 |
COMPRESSIVE STRENGTH OF CONCRETE BY PARTIAL REPLACEMENT OF GLASS FIBERS IN FINE AGGREGATE |
T. Mouli Kishan, M.C.K. Chaitanya , C. Rajamallu , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
492 |
ASSESSMENT OF WATER QUALITY INDEX FOR THE GROUNDWATER IN VADDESWARAM, ANDHRA PRADESH |
Sridhar K , Lakshman A , V.Sree Lakshmi, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
493 |
EFFECTS OF ACIDS AND BASES CONTAMINATION ON SOIL PROPERTIES IN PAVEMENT CONSTRUCTION |
Melbourne Kid Syiemiong, Rishav Verma, B.G Rahul , G. Sri Harsha, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
494 |
ASSESSMENT OF HEAVY METAL CONCENTRATION IN GROUND WATER BY USING REMOTE SENSING AND GIS |
M. Satish Kumar, SS. Asadi , S.S. Vutukuru , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
495 |
COMPARATIVE STUDY ON FLEXURAL BEHAVIOUR OF LIGHTWEIGHT AGGREGATE RC BEAMS |
K. Harish Kumar, P. Polu Raju, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
496 |
COMPARATIVE STUDY ON ANALYSIS OF PLAIN AND RC BEAM USING ABAQUS |
Ch. Koteswara Rao, P. Polu Raju, T. Nagaseshu Babu, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
497 |
EXPERIMENTAL STUDY ON PLASTIC FIBER REINFORCED FLYASH BASED GEOPOLYMER CONCRETE |
A. Gowtham Kumar, K. Prasanthi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
498 |
ANALYSIS OF SEGMENTS ACROSS CABLESTAY BRIDGE THROUGH SIMULATION USING STAAD PRO MODEL STUDY |
Marri Vamsi Krishna, Yalamuri Ashok Reddy, I. Siva Kishore, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
499 |
ANALYSIS AND DESIGN OF COMMERCIAL BUILDING |
Mounika.Pallapolu , Aquila Angel. Pilli, K. Prasanthi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
500 |
ANALYSIS OF A COMMERCIAL BUILDING USING ETABS |
Yash Kumar K. Jain, V. Naga Sri Nikhil, P. Polu Raju, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
501 |
EVALUATION OF COST AND TIME IMPACTS TO OVERRUNS IN CONSTRUCTION INDUSTRY |
M.V. Raju , SS. Asadi , M. Satish Kumar, Hepsibah Palivela, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
502 |
EMPIRICAL APPROACH FOR ESTIMATION OF SOIL QUALITY INDEX: A CASE STUDY FROM A.P |
D. Satish Chandra, SS. Asadi , M.V. S. Raju , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
503 |
TENSILE AND FLEXURAL BEHAVIOUR OF HIGH STRENGTH CONCRETE REINFORCED WITH NATURAL (VALVET MESQUITE) FIBERS |
Manoj Kumar Velagala, Gopichand Buddi, K.J. Brahma Chari, I. Siva Kishore, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
504 |
CREATION OF MANDAL LEVEL LAND DATA BASE INFORMATION USING REMOTE SENSING & GIS: A MODEL STUDY |
SS. Asadi , M. Sujatha , M. Satish Kumar, S.Sai Sree, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
505 |
USAGE OF WASTE MATERIALS IN PAVEMENT CONSTRUCTION WITH REPLACEMENT OF CONVENTIONAL MATERIALS |
Sravanth. B Sambaturu, Surendra Y.L , T. Nagaseshu Babu, K. Hemantha Raja, SS. Asadi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
506 |
FATIGUE ANALYSIS OF PRESSURE VESSELS USING VARIOUS STIFFENERS |
Eswara Kumar. A, G R Sanjay Krishna, R. Krishna Santosh, M. Nagaraju , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
507 |
ENCOURAGE HEALTH AND SAFETY MANAGEMENT IN HIGHWAY PROJECTS (CASE STUDY) |
Shahrukh Shaik, I.Siva Kishore, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
508 |
DESIGN OF POLYESTER (RECRON-3S) FIBER REINFORCED FLEXIBLE PAVEMENT |
G Pradeep Reddy, G Tarun Krishna, K. Hemantha Raja, S. Shahabas , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
509 |
COMPARATIVE STUDY ON SECURITY THREATS IN MOBILES AND IOT DEVICES |
Mohan Kumar Ch, Neha Shikha, S.L. Sowndarya , N.A.Ramarao , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
510 |
A MODEL ANALYSIS FOR THE PROMOTIONAL TECHNIQUES OF CELL PHONE SUBSCRIBER IDENTITY MODULE (SIM) CARDS |
D. Prasanna Kumar, K. Rajyalakshmi , SS. Asadi , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
511 |
A CASE STUDY ON FLOOD FREQUENCY ANALYSIS |
Kalpalatha Ganamala, P. Sundara Kumar, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
512 |
EVALUATION OF LATEST TRENDS AND DEVELOPMENTS IN LEAN CONSTRUCTION IN INDIA: A MODEL STUDY |
K. Shyam Chamberlin, SS. Asadi , D. Sai Chaitanya, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
513 |
PERFORMANCE ANALYSIS OF CELLULAR SYSTEM USING DISTRIBUTED DYNAMIC CHANNEL ALLOCATION |
Y.S.V.Raman , S.Sri Gowri , B.PrabhakaraRao , |
Volume 3,Issue 1,Year 2012 |
International Journal of Electronics and Communication Engineering and Technology |
514 |
ANALYTICAL STUDY OF EBG STRUCTURES ON INSET FED MSP ANTENNAS |
B.T.P.Madhav , S.S.Mohan Reddy, |
Volume 3,Issue 2,Year 2012 |
International Journal of Electronics and Communication Engineering and Technology |
515 |
Keyword Based Contextual Dependency Graph Model for Source Code to API Documentation Mapping |
Nakul Sharma, Prasanth Yalla, |
Volume 20,Issue 2,Year 2019 |
International Journal of Simulation: Systems, Science and Technology |
516 |
DIGITAL MARKETING STRATEGICAL ROLE TO PROMOTE TECHNICAL EDUCATION IN ANDHRA AND TELANGANA: AN EXPLORATORY STUDY |
D. Prasanna Kumar, K. Rajyalakshmi , SS. Asadi , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
517 |
EVALUATION OF AIR QUALITY INDEX USING ANALYTICAL APPROACH - A MODEL STUDY FROM A.P. |
D. Satish Chandra, SS. Asadi , M.V.S. Raju , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
518 |
EVALUATION OF SURFACE WATER CHARACTERISTICS USING REMOTE SENSING AND GIS - A MODEL STUDY |
SS. Asadi , K. Rajyalakshmi , M. Satish Kumar, N. Vijay Kumar, |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
519 |
LOW POWER DESIGN OF WALLANCE TREE MULTIPLIER |
B.K.V.Prasad , P.Satish Kumar, B. Stephen Charles, T. Prasad , |
Volume 3,Issue 3,Year 2012 |
International Journal of Electronics and Communication Engineering and Technology |
520 |
REMOTE SENSING AND GIS BASED WATER QUALITY ESTIMATION FOR THIMMAPALLY WATERSHED |
SS. Asadi , M. Satish Kumar, B. Ramyaa Sree, M. Sujatha , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
521 |
PREPARATION OF CHANGE DETECTION MAPPING USING REMOTE SENSING AND GIS: A MODEL STUDY |
M. Harinadh , Y. L. Surendra Babu, SS. Asadi , B. Mohanty , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
522 |
IPCCR FRAMEWORK DEVISED FOR APPLICATION MAINTENANCE AND SUPPORT PROJECTS |
Srinivasa Rao Kosiganti, Prasanth Yalla, |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
523 |
REALIZABILITY OF MATRIX RICCATI TYPE DYNAMICAL SYSTEMS ON TIME SCALES |
Y.Sobhanbabu , B. V. Appa Rao, T. Srinivasa Rao, K.A.S.N.V. Prasad , |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
524 |
REDUCTION OF HARMONICS AND SURFACE WAVE LOSSES IN SERRATED MSPA USING 2D-EBG STRUCTURES |
B.T.P.Madhav , Habibullah Khan, Atluri Lakshmi Tejaswani, Kharahari Tripuraneni, Bhaskar Teja Varada, Banda Krishna Chaitanya, |
Volume 3,Issue 2,Year 2012 |
International Journal of Electronics and Communication Engineering and Technology |
525 |
CREATION OF REMOTE SENSING & GIS BASED LAND RESOURCES INFORMATION SYSTEM FOR LAND RESOURCES MANAGEMENT |
G.S. Sarma , SS. Asadi , S. Lakshmi Narayana, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
526 |
EVALUATION OF LAND USE AND LAND COVERUSING REMOTE SENSING AND GIS:A MODEL STUDY FROMGUNTUR DISTRICT |
SS. Asadi , Biswajita Mohanty, J.K.Sai Varma, G.Goutham Krishna, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
527 |
HEAT TRANSFER THROUGH ANNULAR COMPOSITE FINS |
T.Kanthimathi , Naga Sai Ram. G, |
Volume 4,Issue 1,Year 2016 |
Journal of Mechanical Engineering and Technology |
528 |
A STUDY ON CIVIL ENGINEERING STUDENTS PERCEPTION TOWARDS DEMONETIZATION IN GUNTUR DISTRICT, ANDHRA PRADESH |
B.Kishore Babu, M.V.A.L. Narasimha Rao, |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
529 |
ENHANCED ATTACK RESISTANT AGENT BASED DYNAMIC KEY MANAGEMENT IN DYNAMIC WIRELESS SENSOR NETWORKS |
Riaz Shaik, Shaik Shakeel Ahamad, |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
530 |
SWIRL VELOCITY VISUALIZATION BY THE LES IN COMBUSTION CHAMBER |
Naveen J , M. Krishna Sai Ram, M. Sureshratankumar , Y. Vinayababu , P. Jayadeep , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
531 |
EXPERIMENTAL STUDY ON STRENGTH PARAMETERS OF CONCRETE BY PARTIAL REPLACEMENT OF CEMENT WITH RECYCLED CRUSHED GLASS POWDER |
M. Mounika , B.Venkat Lalith, V. Ranga Rao, G. Lalitha , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
532 |
MAPPING AND EVALUATION OF CONSTRUCTION MATERIALS IN AND AROUND AMARAVATHI-THE CAPITAL OF ANDHRA PRADESH |
Ayyappa. M , Jayaram Reddy. G, K. Rajashekara Reddy, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
533 |
A SURVEY ON APPLICATIONS OF INTERNET OF THINGS |
Riaz Shaik, Narendra Kumar Gudapati, Nikhil Kumar Balijepalli, Harshitha Raj Medida, |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
534 |
THE STUDY ON USE OF PLASTIC WASTE IN FLEXIBLE PAVEMENTS |
M.Murali Krishna, S.Shiva kumar, Rangarao.V , K.Shyam Chamberlin, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
535 |
A STUDY ON ENGINEERING FACULTY PERCEPTION TOWARDS INVESTMENT AVENUES IN GODAVARI DISTRICTS OF ANDHRA PRADESH |
B. Kishore Babu, Vanama Sri Harshini, A. Madhavi , |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
536 |
ANALYSIS AND DESIGN OF MULTISTOREYED RESIDENTIAL BUILDING USING STAAD PRO |
Sk.Salmaan , V.Rajkumar , N.Phaniteja , P.Poluraju , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
537 |
COMPARATIVE STUDY OF DENSITY-BASED CLUSTERING ALGORITHMS |
Y. Vijay Bhaskar Reddy, L.S.S. Reddy , S. Sai Satyanarayana Reddy, |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
538 |
DEVELOPMENT OF THE SOFT TOOL FOR EVALUATION OF MR DAMPER BASED ON THE OPERATIONAL PARAMETERS |
Mojeswara Rao Duduku, N.Sanjay Reddy, Vishnuvardhan , K.Manikanta Sai, B.Pavan Chowdary, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
539 |
A STUDY ON LOW LATENCY TRADING IN INDIAN STOCK MARKETS |
Rajan Lakshmi A, Vedala Naga Sailaja, |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
540 |
USE OF WASTE PLASTIC IN FLEXIBLE PAVEMENTS |
V.Rushendrareddy , T.Surendra , B.Rahul , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
541 |
ON THE CONTROLLABILITY OF FUZZY DIFFERENCE CONTROL SYSTEMS |
T. Srinivasa Rao, G. Suresh Kumar, Ch. Vasavi , B. V. Appa Rao, |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
542 |
ANALYSIS AND DESIGN OF A (G+4) BUILDING |
S.Venugopal , K.Dileep Kumar, Shubham Singh, N. Lingeshwaran , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
543 |
AN EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF BAGASSE ASH IN BASALT CONCRETE MIX |
K.V.Ramesh , R.Goutham , I. Siva Kishore, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
544 |
AN ANALYTICAL APPROACH FOR ENVIRONMENTAL POLLUTION CONTROL THROUGH SOLID WASTE MANAGEMENT: A MODEL STUDY |
K.Yugandhar Reddy, K.V.S.G.Murali Krishna, I.Srinivasa Reddy, SS. Asadi , |
Volume 8,Issue 11,Year 2017 |
International Journal of Civil Engineering and Technology |
545 |
ESTIMATION OF INFRASTRUCTURE REQUIREMENTS FOR DEVELOPMENT OF SMART CITY : A MODEL STUDY ON KAKINADA; ANDHRA PRADESH, INDIA |
P. Vinod Kumar Reddy, K. Rajasekhara Reddy, SS. Asadi , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
546 |
EVALUATION OF LAND USE/LAND COVER CHANGES IN VIJAYAWADA CITY BY USING REMOTE SENSING AND GIS |
Y. Ravi , D.Santhosh , D. Satish Chandra, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
547 |
Power Management Strategy for Solar Photovoltaic Systems with Battery Protection Scheme in DC Microgrid |
T. Vijay Muni, S. V. N. L. Lalitha , |
Volume 20,Issue 1,Year 2019 |
International Journal of Simulation: Systems, Science and Technology |
548 |
Combination of MW and Deep Neural Network based Fault location Identification for Multi-Terminal Transmission Systems |
Y. Srinivasa Rao, G. Ravi kumar , P. Srinivasa Varma, |
Volume 20,Issue 1,Year 2019 |
International Journal of Simulation: Systems, Science and Technology |
549 |
EFFECT ON FLEXURAL STRENGTH OF REINFORCED GEOPOLYMER CONCRETE BEAMS BY USING GGBS, METAKAOLIN AND ALKALINE SOLUTION |
G. Adisekhar , B. Sarath Chandra Kumar, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
550 |
RISK MANAGEMENT IN CONSTRUCTION EQUIPMENT |
Sai Teja N, Surya Anil Ch, Afshan sheikh, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
551 |
STRUCTURAL PERFORMANCE OF HIGH FIBER CONCRETE WITH BAMBOO REINFORCEMENT |
S. Koti , I. Siva Kishore, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
552 |
Performance of DPFC using ANN and Comparison with PI Controllers |
D Narasimha Rao, P. Srinivasa Varma, |
Volume 19,Issue 4,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
553 |
Implementation of Multi-hop Technique in Dec Protocol |
Habibulla Mohammad, A.S.ChandrasekharaSastry , |
Volume 19,Issue 4,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
554 |
Skill Test Using Fuzzy and Neuro Systems |
Abhigna Jalli, Kodukula Subrahmanyam, |
Volume 19,Issue 4,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
555 |
STUDY OF HIGH GRADE PORTLAND SLAG CEMENT CONCRETE CONTAINING GRANULATED BLAST FURNACE SLAG AS FINE AGGREGATE |
Ch. Srinivasarao , SS. Asadi , M. Kameswararao , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
556 |
OCTAVE WAVE SOUND SIGNAL MEASUREMENTS IN DUCTED AXIAL FAN UNDER STABLE REGION AT THROTTLE POSITION 5 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 1,Year 2012 |
International Journal of Design and Manufacturing Technology |
557 |
GEOSPATIAL ANALYSIS OF RAMPANT URBAN SPRAWLING IN SEISMICALLY FRAGILE ZONES AND ITS ADVERSE SCENARIOS IN THE WESTERN PART OF HYDERABAD, TELANGANA, INDIA |
Sunil , SS. Asadi , Reddy SRK , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
558 |
GENERIC CODE CLONING METHOD FOR DETECTION OF CLONE CODE IN SOFTWARE DEVELOPMENT |
Syed Mohd Fazalul Haque, V. Srikanth , E. Srinivasa Reddy, |
Volume 8,Issue 2,Year 2017 |
International Journal of Computer Engineering and Technology |
559 |
A PRE-EMPTIVE MULTIPLE QUEUE BASED CONGESTION CONTROL ALGORITHM FOR WSN |
Y. Nikhita , K Venkatesh , Gandharba Swain, S. Vinay Kumar Reddy, |
Volume 8,Issue 2,Year 2017 |
International Journal of Computer Engineering and Technology |
560 |
DESIGN OF AUTOMATIC GUIDED VEHICLES |
K. Kishore Kumar, M.Siva Krishna, D.Ravitej , Bhavana , |
Volume 7,Issue 1,Year 2019 |
International Journal of Thermal Engineering |
561 |
EFFECT OF STRENGTH IN SELF COMPACTING CONCRETE BY USING INDUSTRIAL BY-PRODUCTS |
B. SaiTeja , C. Rajamallu , |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
562 |
COMPARATIVE STUDY ON COMPRESSIVE STRENGTH OF FLY ASH CONCRETES |
V. Manohar , P. Polu Raju, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
563 |
EXPERIMENTAL STUDY ON COIR FIBRE REINFORCED FLYASH BASED GEOPOLYMER CONCRETE WITH 12M & 10M MOLAR ACTIVATOR |
P A N V L Narasimha Swamy, U.Venu Gopal, K Prasanthi , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
564 |
ESTIMATION OF RUNOFF FOR AGRICULTURAL UTILIZATION USING GEOINFORMATICS: A MODEL STUDY FROM TELANGANA STATES |
SS. Asadi , M. Satish Kumar, N. Vijay Kumar, K. Rajyalakshmi , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
565 |
A STUDY ON TESTING PERFORMANCE OF NIFTY COMMODITY INDEX CONSTITUENT COMPANIES IN INDIA USING CARHART FOUR FACTOR MODEL: EMPIRICAL ANALYSIS |
Jakeer Hussain Shaik, Santoshi bhuma, Vymisha Vankayala, |
Volume 9,Issue 1,Year 2018 |
International Journal of Civil Engineering and Technology |
566 |
IOT HOME MECHANIZATION FRAMEWORK |
C. Ramesh Kumar, Chalasani srinivas, |
Volume 9,Issue 1,Year 2018 |
International Journal of Civil Engineering and Technology |
567 |
ANALYSIS AND PREDICTION OF DEFECTS USING RELIABILITY GROWTH MODELS |
Prasanth Yalla, N. Vijaya Bharathi, B. Sai Tejaswini, P.Sai Krishna, |
Volume 9,Issue 1,Year 2018 |
International Journal of Civil Engineering and Technology |
568 |
ON REGULAR, IDEALS IN PARTIALLY ORDERED SOFT TERNARY SEMI GROUPS |
T. Srinivasa Rao, B. Srinivasa Kumar, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
569 |
STEEL JACKETING FOR RESTRENGTHENING OF REINFORCED CONCRETE COLUMN BY GALVANIZED IRON WIRE MESH |
PSL Manogna , Jagadish Kumar, Rakesh Kumar Reddy, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
570 |
Smile Detection for User Interfaces |
VVS. Murthy , T. Vinay Sankar, Ch. Padmavarenya , B. Pavankumar , K. Sindhu , |
Volume 2,Issue 3,Year 2014 |
International Journal of Research in Electronics & Communication Technology |
571 |
A NOVEL APPROACH FOR SEISMIC ANALYSIS OF A MULTI STORYED BULIDING WITH AND WITHOUT HAVING FLOATING COLUMNS |
P. Rama Jitendra, K. Shyam Chamberlin, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
572 |
STRENGTH AND DURABILITY OF HIGH VOLUME FLYASH CONCRETE |
K. Krishna Teja, B. Kameswara Rao, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
573 |
RESPONSE SIMULATON OF RC FRAME WITH DIFFERENT BRACING SYSTEMS |
Sudheer. S , K.Shyam Chamberlin, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
574 |
STUDY ON CONCRETE STRENGTH PARAMETERS UNDER DIFFERENT CURING CONDITIONS |
Hari Prakash, K.Prasanthi , |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
575 |
A NOVEL AUDIO BASED HUMAN INTERACTION PROOF FOR VISUALLY CHALLENGED USERS |
Chalasani srinivas, |
Volume 9,Issue 1,Year 2018 |
International Journal of Civil Engineering and Technology |
576 |
A NOVEL APPROACH FOR SEISMIC ANALYSIS OF RESIDENTIAL REINFORCED CEMENT CONCRETE STRUCTURE AND TO SHOW IT`S P- DELTA EFFECT |
N. Sai Kiran, V. Ranga Rao, A. Venkateswara Rao, M. Achyutha Kumar Reddy, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
577 |
COMPARATIVE STUDY IN PERFORMANCE OF STEEL BUILDINGS IN VARIOUS SEISMIC ZONES OF INDIA |
V. Rami Reddy, K. Vijaya Krishna, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
578 |
IMPACT OF PERFORMANCE MANAGEMENT SYSTEM ON EMPLOYEE PERFORMANCE- A CONCEPTUAL FRAME WORK FOR IT ORGANIZATIONS |
Ravi Chandra G, A. B. Saraswathi , |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
579 |
PLANNING AND ESTIMATION OF WATER GRID IN SUB BASIN OF GUNDLAKAMMA RIVER, ANDHRA PRADESH, INDIA: A MODEL STUDY |
Sai Krishna Kesanapalli, K. Rajasekhara Reddy, P. Sundara Kumar, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
580 |
ADOPTION OF TECHNOLOGY FOR IMPLEMENTATION OF PRADHAN MANTRI AWAS YOJANA (PMAY): A CASE STUDY OF ANDHRA PRADESH |
M. Rajasekhar Naik, K. Rajasekhara Reddy, P. Santha Rao, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
581 |
SUSTAINABLE DEVELOPMENT OF RAJAHMUNDRY CITY: A MODEL STUDY |
Y. Uma Mahesh, K. Rajasekhara Reddy, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
582 |
EVALUATION OF FACTORS DECLINING COST VARIATION FOR CONSTRUCTION OF ENDOWMENT BUILDINGS |
B. Nagarjuna Kumar, Sesha Sai Ratnamala Bommareddy, SS. Asadi , |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
583 |
IS FINANCIAL AND SUSTAINABILITY PERFORMANCE ASSOCIATED WITH STOCK PERFORMANCE? A PANEL DATA ANALYSIS OF B.S.E. TELECOM INDEX COMPANIES |
Jakeer Hussain Shaik, Are.rithendraja reddy, Nallapaneni Akhil chowdary, Yalla jahnavi , |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
584 |
EVOLUTION OF WIND EFFECT ON I - PLAN SHAPED TALL BUILDING USING FLUENT |
G. Venkatesh , I. Siva Kishore, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
585 |
BLAST LOAD ANALYSIS AND EFFECT ON HIGH RISE STRUCTURES |
Boyina sita Rama krishna, J. Chandra Sekhar, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
586 |
EXPERIMENTAL INVESTIGATION ON FLEXURAL BEHAVIOUR OF FLY ASH CONCRETE BY REPLACING SAND WITH M- SAND |
V. Sai Kumar, A. Venkateswara Rao, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
587 |
NEW LEADERSHIP IN THE DIGITAL ERAA CONCEPTUAL STUDY ON EMOTIONAL DIMENSIONS IN RELATION WITH INTELLECTUAL DIMENSIONS |
Ch. Sahyaja , K.S. Sekhara Rao, |
Volume 9,Issue 1,Year 2018 |
International Journal of Civil Engineering and Technology |
588 |
A STUDY ON THE CONCEPT OF QUALITY OF WORK LIFE WITH RESPECT TO JUTE INDUSTRY- A LITERATURE REVIEW |
K. Hymavathi , A.B. Saraswathi , |
Volume 9,Issue 1,Year 2018 |
International Journal of Civil Engineering and Technology |
589 |
Hybrid Beamsteering of Ka-Band Array-Fed Reflector Antenna for Satellite Communication Links |
S.S.S Kalyan , K.Ch. Sri Kavya , Sarat K Kotamraju, |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
590 |
A Systematic Analysis of Load Balancing in Cloud Computing |
Akhila Bezawada, Surya Teja Marella, T Gunasekhar , |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
591 |
Statistical Anatomizing and Visualization of Data for Planning and Decision Making using POSTGRES and GIS Tools |
Asha Kiran M, M. Sreedevi , |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
592 |
Feature-Based Robust Image Watermarking Using DTT and SVD for Copyright Protection |
J L Divya Shivani, Ranjan K. Senapati, |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
593 |
A Hybrid Statistical Data Preprocessing and Data Forecasting Model on ERP based Supply Chain Management (SCM) Databases |
sam Sekhar M, P.Venkata Chalapathi, |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
594 |
OCTAVE WAVE SOUND SIGNAL MEASUREMENTS IN DUCTED AXIAL FAN UNDER STABLE REGION AT THROTTLE POSITION 2 CM |
Manikandapirapu P.K , Srinivasa G.R , Sudhakar K.G , Madhu D , |
Volume 3,Issue 1,Year 2012 |
International Journal of Production Technology and Management |
595 |
Enhancement of Performance and Economy of Data Centers by Virtualization |
Surya Teja Marella, K Karthikeya , V Sai Kushwanth, Akhila Bezawada, |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
596 |
Evaluation of Performance of Software GPS Receiver using Sub-Sampling and Thresholding |
M Harshali , M Venu Gopala Rao , |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
597 |
Performance Assessment of MB-MF-SIC Detector using Space Time Block Codes |
B. Suneela , E.V. Krishna Rao , Sarat K Kotamraju, K. Ch. SriKavyaK , |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
598 |
A DOCUMENT RANKING APPROACH BASED ON WEIGHTED-GENE/PROTEIN IN LARGE BIOMEDICAL DOCUMENTS USING MAPREDUCE FRAMEWORK |
K.S.S. Joseph Sastry, Venkata Daya Sagar Ketaraju, |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
599 |
SERVANT LEADERSHIP AND SPIRITUALITY AT WORKPLACE: A CRITICAL REVIEW |
Asi Vasudeva Reddy, |
Volume 7,Issue 1,Year 2019 |
International Journal of Leadership |
600 |
A STUDY ON THE ROLE OF MONEY LENDERS IN GUNTUR DISTRICT, A.P. |
Usha Saranya Alapati, P. Raja Babu, |
Volume 7,Issue 1,Year 2018 |
Journal of Commerce & Accounting Research |
601 |
Identification of Parasite Presence on Thin Blood Splotch Images |
Venkata Naresh Mandhala, Debnath Bhattacharyya, D. Sushma , |
Volume 12,Issue 19,Year 2020 |
International Journal of Current Research and Review |
602 |
Prediction and Forecasting of Persistent Kidney Problems Using Machine Learning Algorithms |
Debnath Bhattacharyya, Bhanu Prakash Doppala, N. Thirupathi Rao, |
Volume 12,Issue 20,Year 2020 |
International Journal of Current Research and Review |
603 |
Advanced Empirical Studies on Group Governance of the Novel Corona Virus, MERS, SARS and EBOLA: A Systematic Study |
Debnath Bhattacharyya, Nakka Marline Joys Kumari, Eali Stephen Neal Joshua, N Thirupathi Rao, |
Volume 12,Issue 18,Year 2020 |
International Journal of Current Research and Review |
604 |
An Artificial Intelligent based System for Efficient Swine Flu Prediction using Naive Bayesian Classifier |
Pilla Srinivas, Debnath Bhattacharyya, Divya Midhun Chakkaravarthy, |
Volume 12,Issue 15,Year 2020 |
International Journal of Current Research and Review |
605 |
Assessment of Customer Satisfaction of Domestic Tourists in Resorts |
G. Saravana Kumar, N. Geetha Soni, |
Volume 13,Issue 1,Year 2020 |
International Journal of Hospitality & Tourism Systems |
606 |
Detection of Colorectal Cancer by Deep Learning: An Extensive Review |
Mohan Mahanty, Debnath Bhattacharyya, Divya Midhunchakkaravarthy, Tai-hoon Kim, |
Volume 12,Issue 22,Year 2020 |
International Journal of Current Research and Review |
607 |
A STUDY OF STOCK PERFORMANCE OF SELECT IPOS IN INDIA |
Mohammed Arshad Khan, Khudsiya Zeeshan, Md Faiz Ahmad, Syed Azhar, Abdullah A Alakkas, MD Rashid Farooqi, |
Volume 25,Issue 6,Year 2021 |
Academy of Accounting and Financial Studies Journal |
608 |
EXPLORING NATURAL COMBINATION FOR IDENTIFICATION OF UPREGULATED NITROGEN FIXING BACTERIA IN GLYCINE MAX: AN IN VIVO, IN VITRO AND IN SILICO APPROACH |
Sadam D.V Satyanarayana, M.S.R. Krishna , Pindi Pavan Kumar, |
Volume 15,Issue 2,Year 2018 |
Pakistan Journal of Biotechnology |
609 |
Design, simulation and analysis of high-K gate dielectric FinField effect transistor |
Marupaka Aditya, Karumuri Srinivasa Rao, KondaviteeGirija Sravani, Koushik Guha, |
Volume 12,Issue 3,Year 2021 |
International Journal of Nano Dimension |
610 |
Conventional vs. junctionless gate-stack DG-MOSFET based CMOS inverter |
Shubham Tayal, Pachimatla Samrat, Vadula Keerthi, Biswajit Jena, Karthik Rajendra, |
Volume 12,Issue 2,Year 2021 |
International Journal of Nano Dimension |
611 |
Impact of Block Chain Technology on the Process Efficiency with Reference to Financial Markets A Studyv |
Parmeshwari Kalwani, Vijay kumar Reddy, |
Volume 25,Issue 6,Year 2021 |
Academy of Accounting and Financial Studies Journal |
612 |
Dynamic Relations Between Foreign Exchange Rate and Indian Stock Market: A Variance Decomposition Analysis with Var Method |
Nenavath Sreenu, KS Sekhar Rao, Sonal Trivedi, |
Volume 25,Issue 6,Year 2021 |
Academy of Accounting and Financial Studies Journal |
613 |
INVESTORS BEHAVIOR ROLE IN MARKET DECISION - AN IMPACT OF VIX FUTURES ON VIX SPOT |
Parmeshwari , Vijay kumar Reddy, |
Volume 25,Issue 5,Year 2021 |
Academy of Accounting and Financial Studies Journal |
614 |
An Evaluation of the Effect of Consumer Characteristics on Retail Format Patronage Decisions |
Mohammed Shaffiullah, T. Umamaheswara Rao, |
Volume 8,Issue 5,Year 2018 |
International Journal of Engineering and Management Research |
615 |
AN EMPIRICAL STUDY ON SOCIAL MEDIA CONVERSATION TO INCREASE BRAND AWARENESS: STARTUP ORGANIZATION CONTEXT |
Dillip Kumar Parida, D. Prasanna , |
Volume 25,Issue 4,Year 2021 |
Academy of Marketing Studies Journal |
616 |
THE IMPACT OF SOCIAL MEDIA SHARING ON BRAND ASSOCIATION OF STARTUPS: A STUDY ON IT STARTUPS IN HYDERABAD, INDIA |
D. Prasanna , Dillip Kumar Parida, |
Volume 25,Issue 1,Year 2021 |
Academy of Marketing Studies Journal |
617 |
IN-VITRO CYTOTOXICITY ACTIVITY OF SOLANUM XANTHOCARPUM AGAINST MCF7, HELA, A549 AND CACO2 CELL LINES BY MTT ASSAY |
G. Sreedhar , T Bhaskara Rao, |
Volume 8,Issue 2,Year 2021 |
European Journal of Molecular & Clinical Medicine |
618 |
ESSENCE OF WEARABLE DEVICES IN DIAGNOSING COVID19 |
V.Teju , V.Sowmya , |
Volume 8,Issue 2,Year 2021 |
European Journal of Molecular & Clinical Medicine |
619 |
AN EFFICEINT HEALTH MONITORING SYSTEM WITH TEMPERATURE AND HEART RATE SENSORS USING IOT |
K.V.Sowmya , V.Teju , |
Volume 8,Issue 2,Year 2021 |
European Journal of Molecular & Clinical Medicine |
620 |
SOCIAL MEDIA GROUPS AND ITS IMPACT ON ORGANISATION BRAND LOYALTY DUE TO CORPORATE SOCIAL RESPONSIBILITY DURING COVID TIMES |
Dillip Kumar Parida, |
Volume 13,Issue 4,Year 2021 |
Business Studies Journal |
621 |
AN INVESTIGATION ON USAGE OF IOT IN DIGITAL BANKING TO ENHANCE THE CUSTOMER EXPERIENCE |
Dillip Kumar Parida, |
Volume 13,Issue 4,Year 2021 |
Business Studies Journal |
622 |
FACTORS AFFECTING FEMALE CONSUMER`S ONLINE BUYING BEHAVIOR |
Madasu Bhaskara Rao, Ch Lakshmi Hymavathi, M Mallika Rao, |
Volume 22,Issue 2,Year 2018 |
Academy of Marketing Studies Journal |
623 |
THE INFLUENCING FACTORS OF INVESTMENT AND FINANCING - BEHAVIOURAL BASIS APPROACH (A LITERATURE CENTRIC STUDY) |
Samudrala Ramesh, K. Hema Divya, |
Volume 7,Issue 19,Year 2020 |
Journal of Critical Reviews |
624 |
QOS BASED SECONDARY USER SELECTION USING SWARM OPTIMIZATION TECHNIQUES IN COGNITIVE RADIO NETWORK |
Ch. Suneetha , S. Srinivasa Rao, K.S. Ramesh , |
Volume 6,Issue 6,Year 2019 |
Journal of Critical Reviews |
625 |
ROTATION INVARIANT OBJECT CLASSIFICATION USING CONVOLUTIONAL NEURAL NETWORK |
V. Sekhara Babu, N. Venkat Ram, |
Volume 6,Issue 6,Year 2019 |
Journal of Critical Reviews |
626 |
ANALYSIS OF CARRIER PHASE AMBIGUITIES TO DERIVE GPSTEC FOR PRECISE POSITIONING OF GPS RECEIVERS |
N. Swaroop Kumar, K.S. Ramesh , |
Volume 6,Issue 6,Year 2019 |
Journal of Critical Reviews |
627 |
INFLUENCE OF CONVECTIVE WEATHER RELATED PARAMETERS ON RAINFALL OVER VIRAJPET REGION ON 26 APRIL 2013 |
N. Umakanth , G. Ch. Satyanarayana , B. Simon , M.C. Rao , N. Ranga Babu, |
Volume 6,Issue 6,Year 2019 |
Journal of Critical Reviews |
628 |
CORRELATION BASED CHANNEL ESTIMATION IN SPATIAL MODULATION MIMO SYSTEM |
P.Rajani Kumari, K.ChennaKesava Reddy, K.S. Ramesh , |
Volume 6,Issue 6,Year 2019 |
Journal of Critical Reviews |
629 |
PASSIVE TARGET TRACKING USING ANGLE-ONLY MEASUREMENTS |
M. Kavitha lakshmi, S. Koteswararao , K. Subramanyam , |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
630 |
ANALYSIS OF INTELLIGENT TECHNIQUES IN PERSONALIZATION IN E-LEARNING SYSTEMS |
Anupriya Koneru, D. Leela Dharani, A Vijaya Kumar, |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
631 |
A MULTI RESOLUTION CONVOLUTION NEURAL NETWORK BASED FACE RECOGNITION ANALYSIS |
Rama Devi Burri, A.Madhuri , N.Raghavendra Sai, |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
632 |
ANALYSIS OF UNIVARIATE TIME SERIES IMPUTATION TECHNIQUES IN PRESENCE OF MISSING DATA |
V.Sowjanya , Y. Surekha , Krishnaveni Kommuri, |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
633 |
NEUROIMAGING DATA PROCESSING USING OPTIMAL MACHINE LEARNING ALGORITHM WITH IMPROVEMENT TO CLASSIFIER PERFORMANCE |
Abhigna Jalli, Kodukula Subrahmanyam, |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
634 |
PREDICTION OF HEART DISEASE ON THE BASIS OF A MACHINE LEARNING APPROACH |
T. Sri Lakshmi, Ramakrishna Regulagadda, Kallakunta Ravi Kumar, P.Jagadeesh , |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
635 |
ARTIFICIAL INTELLIGENCE BASED INTRUSION DETECTION ANALYSIS USING CLOUD COMPUTING |
V Suryanarayana , P.Jagadeesh , A.Vanamala Kumar, Musala Venkateswara Rao, |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
636 |
ANALYSIS OF RANDOM-ACCESS SCHEME FOR 5G CELLULAR NETWORKS |
Rama Devi Odugu, G. Lalitha Kumari, Bhupati , Arshad Ahmad Khan Mohammad, |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
637 |
ANALYSIS OF DEEP LEARNING ALGORITHMS FOR DETECTING DIABETES |
B. Narasimha Swamy, K.Michael Sadgun Rao, Mohammed Moulana, |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
638 |
ON ANTI-FUZZY IDEALS IN SUBTRACTION SEMIGROUPS |
SVB Subrahmanyeswara Rao, M Sudheer Kumar, MVSS Kiran Kumar, T Srinivasa Rao, |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
639 |
Customized Digital Logic Circuit based design for Physical Unclonable Function |
Syed Inthiyaz, Sk. Hasane Ahammad, Poorna Chander Reddy, M. Siva Kumar, B. Murali Krishna, |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
640 |
An automatic diagnosis of epileptic seizure based on optimization using Electroencephalography Signals |
Priti N Bhagat, K.S. Ramesh , S T Patil , |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
641 |
IMPLEMENTATION OF NATURAL RANDOM FOREST MACHINE LEARNING METHODS ON MULTI SPECTRAL IMAGE COMPRESSION |
k.Raju , Sahitya Kiran Pilli, Gandi Siva Suresh Kumar, k saikumar , B.Omkar Lakshmi Jagan, |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
642 |
IMPLEMENTATION OF UKF FOR TRACKING AN UNDERWATER TARGET USING DUNKING SONAR |
Sujeeth Sai B, Prashanth Ch , Koteswara Rao S, Kausar Jahan, |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
643 |
ACTION RECOGNITION FROM TIME SERIES GEOMETRIC JOINT FEATURES ON LSTM NETWORK |
K. Vijaya Prasad, P.V.V. Kishore , O. Srinivasa Rao, |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
644 |
UNDERWATER TARGET TRACKING SYSTEM USING ACTIVE SONOBUOYS |
K. Bhargav Sri Sai, K. Narashima Rao, Koteswara Rao S, Kausar Jahan, |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
645 |
DUAL ENGINE COMMERCIAL AUTOMOBILE WITH IN-BUILT PNEUMATIC CHASSIS LIFTING TECHNO-SYSTEM |
Evvala Satya Bharath, Anudeep Patel, P. N. V Bala Subramanyam, Moon Banarjee, S.Narayana Reddy, M.Dinesh , M.Venkatesh , |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
646 |
IMPACT OF AGROMETEOROLOGICAL PARAMETERS OVER BIHAR AND JHARKHAND REGIONS FOR THE YEAR 2018 |
Y. Dasaradhudu , M. Seshu Kumar, RKNR Manepalli , B.T.P.Madhav , M.C. Rao , |
Volume 6,Issue 5,Year 2019 |
Journal of Critical Reviews |
647 |
AN INNOVATIVE APPROACH TO COVID-19 DIAGNOSIS AND PREDICTION USING MACHINE LEARNING MECHANISMS |
D. Madhusudhana Rao, J.Dayanika , Harika. S , Sarada Korrapati, |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
648 |
IMPROVED EMOJI IDENTIFICATION FOR SENTENCE USING LSTM IN RNN |
B. Premamayudu , N Lakshmipathi Anantha, R.Vijaya Kumar Reddy, M. Jogendra Kumar, |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
649 |
A SURVEY ON CLUSTER ANALYSIS |
Mohammed Fasi Ahmed Parvez, G. Pradeepini , |
Volume 5,Issue 6,Year 2018 |
Global Journal of Engineering Science and Researches |
650 |
ANALYSIS OF RADIATOR FAN OF WDM-2 LOCO ENGINE FOR EFFICIENCY IMPROVEMENT |
Yesu Ratnam Maddu, K.Divakara Murthy, Shaik Saidulu, |
Volume 5,Issue 12,Year 2018 |
Global Journal of Engineering Science and Researches |
651 |
SOFT-COMPUTING TECHNIQUES FOR FUNCTIONAL MRI BRAIN IMAGE CLASSIFICATION |
Mohan Awasthy, Moon Banarjee, |
Volume 12,Issue 2,Year 2020 |
International Journal of Pharmacy and Technology |
652 |
Current Trending Apps for Teaching and Learning English Language |
P. Vijaya Kumar, K.V. Divya , |
Volume 5,Issue 4,Year 2019 |
International Journal for Research in Engineering Application & Management |
653 |
HEART DISEASE DIAGNOSIS PROCESS USING MRI SEGMENTATION AND LASSO NET CLASSIFICATION ML |
Ravada Aamani, Adinarayana Vannala, A. Sampath Dakshina Murthy, k saikumar , B.Omkar Lakshmi Jagan, |
Volume 7,Issue 6,Year 2020 |
Journal of Critical Reviews |
654 |
Load Forecasting using Kalman Filtering Technique |
S Rajasekhar , M Naga Chaitanya, |
Volume 5,Issue 11,Year 2019 |
International Journal for Modern Trends in Science and Technology |
655 |
Fuzzy Control Based iUPQ Controller to Improve the Network of a Grid Organization |
K Venkata Kishore, T Vijay Muni, P Bala Krishna, |
Volume 5,Issue 11,Year 2019 |
International Journal for Modern Trends in Science and Technology |
656 |
A Prototype for IoT based Car Parking Management System for Smart Cities |
Baratam. M Kumar Gandhi, M. Kameswara Rao, |
Volume 9,Issue 17,Year 2016 |
Indian Journal of Science and Technology |
657 |
Exploration of possibilities for the enhancement of the workplace productivity in educational organizations: A study |
SARAKANAM SRINIVAS, |
Volume 6,Issue 12,Year 2020 |
International Journal for Innovative Research in Multidisciplinary Field |
658 |
Alcoholism: Its Socio-Economic Consequences in Society |
SARAKANAM SRINIVAS, |
Volume 6,Issue 11,Year 2020 |
International Journal for Innovative Research in Multidisciplinary Field |
659 |
Problems and Challenges in MMC Contributing to RP |
A.K. Matta , N.Tamiloli , P.S. Prem Kumar, S.Mohanty , S.S Pattnaik , |
Volume 4,Issue 1,Year 2018 |
International Journal for Modern Trends in Science and Technology |
660 |
Simulation Based Performance Evaluation of Hybrid Wind Energy Battery System Using Sophisticated Soft Computing Technique |
S.Sasikanth , A.Jawahar , T Vijay Muni, |
Volume 4,Issue 1,Year 2018 |
International Journal for Modern Trends in Science and Technology |
661 |
Formulation and Evaluation of Metoprolol Succinate Orodispersible Tablets Using Directly Compressible Coprocessed Excipient of Moringa Gum |
Panda Subhranshu, Ch Surya Kumari, G. Sireesha , |
Volume 14,Issue 1,Year 2020 |
Asian Journal of Pharmaceutics |
662 |
Generating Frequent Item Sets by RElim on Hadoop Clusters |
B.Usharani , |
Volume 4,Issue 3,Year 2018 |
International Journal for Modern Trends in Science and Technology |
663 |
Security and Privacy in fog computing for the Internet of Things using Dynamic Digital Signature |
B.Usharani , |
Volume 4,Issue 3,Year 2018 |
International Journal for Modern Trends in Science and Technology |
664 |
Applicability of Natural Gums for the Development of Controlled Release Vancomycin Hydrochloride Tablets in Site Specific Colon region using Statistical Optimization |
K. Venkateshwarlu , K. Ravi Shankar, K. V. Ramana Murthy, G. S. N. Koteswara Rao, |
Volume 13,Issue 4,Year 2019 |
Asian Journal of Pharmaceutics |
665 |
Internet of Things and Security Issues |
Leela Naga Deepika . CH, |
Volume 4,Issue 3,Year 2018 |
International Journal for Modern Trends in Science and Technology |
666 |
Fog and IoT Network Security through Blowfish Cipher |
B.Usharani , |
Volume 4,Issue 3,Year 2018 |
International Journal for Modern Trends in Science and Technology |
667 |
Studies on Applicability of Poly electrolyte Complex of Vancomycin Hydrochloride for Colon Targeting Beads Using Statistical Optimization |
K. Venkateshwarlu , K. V. Ramanamurthy , K. Ravi Shankar, G. S. N. Koteswara Rao, |
Volume 13,Issue 3,Year 2019 |
Asian Journal of Pharmaceutics |
668 |
Effect of Plasmid Presence and Stability on Growth of Escherichia coli DH5α with Use of Drugs, Chemicals, and Radiation |
Tegegnework Mekonnen Gizaw, Praveen Kumar Vemuri, |
Volume 13,Issue 3,Year 2019 |
Asian Journal of Pharmaceutics |
669 |
Product Recommendations and Improvement in Smart Inventory System through CRM Processes by using Internet of Things and Big Data Analytics |
B.Usharani , |
Volume 4,Issue 3,Year 2018 |
International Journal for Modern Trends in Science and Technology |
670 |
Hydrotropic Technique: A Promising Method to Enhance Aqueous solubility of Nimesulide and to Reduce Difficulties in Bioavailability |
K. Venkata Gopaiah, G. S. N. Koteswara Rao, G. Kalyani , G. Sirisha Chowdary, |
Volume 12,Issue 4,Year 2018 |
Asian Journal of Pharmaceutics |
671 |
Design, Formulation, and Evaluation of Sustained Release Tablets for Antihyperlipidemic Agent |
K. Venkata Gopaiah, G. S. N. Koteswara Rao, G. Kalyani , G. Raghavendra Kumar, |
Volume 12,Issue 4,Year 2018 |
Asian Journal of Pharmaceutics |
672 |
Hematological and immunomodulatory evaluation of methanolic extract of Sorghum bicolor leaves |
Maheswara Reddy Mallu, Srinivasa Reddy Ronda, Srinivasulu Kamma, Golamari Siva Reddy, Sandeep Vemula, |
Volume 12,Issue 1,Year 2018 |
International Journal of Green Pharmacy |
673 |
Arbuscular mycorrhizal symbiosis alters morphological and biochemical indices in hot pepper (Capsicum annuum L.) under drought stress |
M.S.R. Krishna , U. Lakshmisahitya , Lakshmi Sravani Ch, N. Sandhya Rani, K. Tabitha , V. Bhavani Akshitha, |
Volume 12,Issue 2,Year 2018 |
International Journal of Green Pharmacy |
674 |
Effect of analgesic activity in crude extract and isolated compounds of Tecomaria capensis |
K. Venkata Gopaiah, G. Kalyani , G. S. N. Koteswara Rao, E. Tamil Jothi, |
Volume 12,Issue 4,Year 2018 |
International Journal of Green Pharmacy |
675 |
Statistical optimization of medium components for biosurfactant production by Achromobacter xylos GSR21 |
Golamari Siva Reddy, Srinivasulu Kamma, Botlagunta Mahendran, Srinivasa Reddy Ronda, |
Volume 12,Issue 4,Year 2018 |
International Journal of Green Pharmacy |
676 |
In vitro and In vivo anti-inflammatory potential of isolated compounds from ethyl acetate extracts of Tecomaria capensis |
K. Venkata Gopaiah, G. Kalyani , G. S. N. Koteswara Rao, E. Tamil Jothi, |
Volume 12,Issue 4,Year 2018 |
International Journal of Green Pharmacy |
677 |
Legal Protection of Minority Shareholders under Corporate Governance Process |
Suresh Kumar M V, Lakshmana Rao CH, |
Volume 4,Issue 4,Year 2021 |
International Journal of Current Science Research and Review |
678 |
AN EMPIRICAL STUDY ON IMPACT OF CREDIT RATING ON CREDIT RISK OF BANKS: A LITERATURE REVIEW |
Sunitha G , Venu Madhav V, |
Volume 7,Issue 1,Year 2021 |
Indian Journal of Finance and Banking |
679 |
A STUDY ON SIGNIFICANT INFLUENCE OF E-COMMERCE ADOPTION IN AGRICULTURAL SECTOR THROUGHOUT THE COVID-19: BENEFITS AND LIMITATIONS |
P. Madhu Kumar Reddy, A. Rama Kumar, |
Volume 7,Issue 1,Year 2021 |
Indian Journal of Finance and Banking |
680 |
DIGITAL ASPECTS OF BANKING PROGRESS AND WAY FORWARD WITH SPECIAL REFERENCE TO A RURAL AREAS IN ANDHRA PRADESH |
N Subrahmanyam , Sanjay Bhayani, P Venkateswara Rao, Govinda Rajan, |
Volume 10,Issue 3,Year 2021 |
Journal of Commerce & Accounting Research |
681 |
Vehicle Accident Location Detection Using IoT |
Y Suresh , K Pavan Kumar, Yalanati Ayyappa, |
Volume 6,Issue 2,Year 2021 |
International Journal of Advanced Research in Science, Communication and Technology |
682 |
An Integrated Feature Engineering Approach to Identify Falsity in COVID-19 Information |
Haritha Akkineni, Pratuisha Koripilli, VenkataSuneetha Takellapati, Deepthi Gurram, |
Volume 11,Issue 2,Year 2020 |
Journal of Cardiovascular Disease Research |
683 |
Parametric Analysis of the Defected Ground Structure-Based Hairpin Band Pass Filter for VSAT System on Chip Applications |
Navya Ambati, M. Venkata Narayana, Kalyan Reddy Bareddy, M. Sri Prapurna, Jayadeep Yanapu, |
Volume 11,Issue 6,Year 2021 |
Engineering, Technology & Applied Science Research |
684 |
Evaluation of Passive Islanding Detection Methods for Line to Ground Unsymmetrical Fault in Three Phase Microgrid Systems: Microgrid Islanding Detection Method |
L. Bangar Raju, K. Subba Rao, |
Volume 11,Issue 5,Year 2021 |
Engineering, Technology & Applied Science Research |
685 |
Innovative Design and Analysis of an Electrically Small Reconfigurable Antenna for GPS and Blue Tooth Applications |
Harshitha Reddy Katireddy, M. Venkata Narayana, Govardhani Immadi, |
Volume 11,Issue 5,Year 2021 |
Engineering, Technology & Applied Science Research |
686 |
Enhanced-PCA based Dimensionality Reduction and Feature Selection for Real-Time Network Threat Detection |
Pournima More, Pragnyaban Mishra, |
Volume 10,Issue 5,Year 2020 |
Engineering, Technology & Applied Science Research |
687 |
An Ultra-Wideband Band Pass Filter using Metal Insulator Metal Waveguide for Nanoscale Applications |
Surendra Kumar Bitra, Sridhar Miriyala, |
Volume 11,Issue 3,Year 2021 |
Engineering, Technology & Applied Science Research |
688 |
A Kinetic and Synthetic Approach of Surfactants Accelerated by VilsmeierHaack Acetylation and Formylation with Anisole |
Tasneem Mohammed, Aejaz A. Khan, S. M. Shakeel Iqubal, Areej Dawoud, Kayamkani Abedulla Khan, Muazzam Sheriff Maqbul, Shaik Honey Fathima, |
Volume 15,Issue 3,Year 2021 |
Asian Journal of Pharmaceutics |
689 |
SELECTION OF CLASSIFIER MODELS FOR INTRUSION DETECTION SYSTEM(IDS) |
N. Raghavendra Sai, V. Mounika , |
Volume 10,Issue 9,Year 2021 |
International Journal for Innovative Engineering and Management Research |
690 |
Indian Art Education and Contemporary Art Practices |
G. Lenin Babu, Gomathi Gowda, |
Volume 10,Issue 9,Year 2021 |
International Journal for Innovative Engineering and Management Research |
691 |
Tadapatri: ChintalaVenkataramana Temple and its Unique Narrative Sculptures |
Gomathi Gowda, G. Lenin Babu, |
Volume 10,Issue 9,Year 2021 |
International Journal for Innovative Engineering and Management Research |
692 |
Utilizing Machine LearningTechniques for Detection of Intrusion in a Networ |
M. Jogendra Kumar, N. Raghavendra Sai, T. Ravi Kumar, |
Volume 10,Issue 9,Year 2021 |
International Journal for Innovative Engineering and Management Research |
693 |
Chaya Someshwara Temple The Magnificent Architectural Engineering and Art Grandeur |
Gomathi Gowda, G. Lenin Babu, |
Volume 10,Issue 9,Year 2021 |
International Journal for Innovative Engineering and Management Research |
694 |
Can the truth be determined by oversimplified statements?: A discourse on the controversy of Mr Anandayya`s herbal medicine to Covid 19 patients |
SARAKANAM SRINIVAS, |
Volume 7,Issue 11,Year 2021 |
International Journal for Innovative Research in Multidisciplinary Field |
695 |
RESOURCE ALLOCATION BASED ON PREDICTIVE LOAD BALANCING APPROACH IN MULTI CLOUD ENVIRONMENT |
S SINDHURA , CH ANURADHA , |
Volume 9,Issue 9,Year 2020 |
International Journal for Innovative Engineering and Management Research |
696 |
DEVELOPMENT OF A TOPICAL ANTI-INFLAMMATORY GEL FROM VITEX NEGUNDO EXTRACT AND EVALUATING IT |
K. Venkata Gopaiah, G. S. N. Koteswara Rao, |
Volume 7,Issue 11,Year 2018 |
World Journal of Pharmacy and Pharmaceutical Sciences |
697 |
IMPLEMENTATIONOFAUTONOMOUS VEHICLESBASEDON VISION, LOCALIZATIONAND CONTROLAPPROACHES |
G. Venkata Hari Prasad, K. B. V. Aakarsh , |
Volume 10,Issue 11,Year 2021 |
International Journal for Innovative Engineering and Management Research |
698 |
Secure Hybrid Watermarking Technique In Medical Imaging |
G. Nagaraju , P. Pardhasaradhi , V. S. Ghali , G.R.K Prasad , |
Volume 7,Issue 5,Year 2020 |
European Journal of Molecular & Clinical Medicine |
699 |
MEASUREMENT OF DELAY USING TRAVEL TIME RELIABILITY STATISTICS IN AN URBAN OUTER CORRIDOR |
Kanala Teja Vinay Kumar REDDY, Surya Prakash CHALLAGULLA, |
Volume 114,Issue ,Year 2022 |
Scientific Journal of Silesian University of Technology. Series Transport |
700 |
Intensity Duration Frequency Curve Generation using Historical and Future Downscaled Rainfall Data |
Sunny Agarwal, Sanjeet Kumar, Umesh K Singh, |
Volume 48,Issue 1,Year 2021 |
Indian Journal of Ecology |
701 |
Forest Fire Monitoring of Wildlife Sanctuary using Geospatial Techniques |
T. Pardhasree Chaitanya, Umesh Kumar Singh, Sunny Agarwal, |
Volume 48,Issue 3,Year 2021 |
Indian Journal of Ecological |
702 |
Analysis and Interpretation of Rainfall Trend using MannKendall`s and Sen`s Slope Method |
Sunny Agarwal, A.S. Suchithra , Surendra Pal Singh, |
Volume 48,Issue 2,Year 2021 |
Indian Journal of Ecological |
703 |
Soil Loss Assessment for Palair Reservoir Catchment Area Based on Geoinformatics Approach |
Valluri Govardhan Subhash, Umesh K Singh, |
Volume 48,Issue 3,Year 2021 |
Indian Journal of Ecological |
704 |
GIS-based Integrated Approach for Sustainable Management of Ecology and Environment with Green and Blue Spaces |
Shakeena Mikkili, Sampad Kumar Panda, Sunny Agarwal, |
Volume 48,Issue 3,Year 2021 |
Indian Journal of Ecological |
705 |
Intercomparison of Trend Analysis using Multi Satellite Precipitation Products and Gauge Measurements |
A.S. Suchithra , Sunny Agarwal, |
Volume 48,Issue 4,Year 2021 |
Indian Journal of Ecological |
706 |
Assessment of Sedimentation in Maithon Reservoir using Remote Sensing and GIS |
P. Santhoshi , Sanjeet Kumar, |
Volume 48,Issue 4,Year 2021 |
Indian Journal of Ecological |
707 |
Production of Polyhydroxtbutyratye from Marine Source: A Review |
A. Ranganadhareddy , Ch. Chandrasekhar , |
Volume 48,Issue 6,Year 2021 |
Indian Journal of Ecology |
708 |
A STUDY ON THEORY X & THEORY Y: IMPLICATIONS OF TEACHERS IN HIGHER EDUCATION |
Y.Keerthana , M.Kishore Babu, |
Volume 8,Issue 10,Year 2018 |
International Journal of Management, IT & Engineering |
709 |
A REVIEW OF VACCINES FOR HIV/AIDS: IMMUNOLOGICAL PREPARATION OF FIGHTS AGAINST LIFE-THREATENING OPPORTUNISTIC INFECTED DISEASES |
P.Ravinder Reddy, K.Sudhakar , R.Rakesh , L.Sravanthi , N. Rajendera Kumar, |
Volume 13,Issue 4,Year 2021 |
International Journal of Pharmacy and Technology |
710 |
CLIENT COMPANIES` PERCEPTION TOWARDS CREDIT RISK OF PRIVATE SECTOR BANKS WITH REFERENCE TO ICICI, HDFC, AXIS BANK, IDBI, AND YES BANK |
Sunitha G , Venu Madhav V, |
Volume 9,Issue 1,Year 2022 |
Indian Journal of Finance and Banking |
711 |
Value Stream Management through an Integration model of Agile and DevOps |
V S R K Sarma , Pathanjali Sastri, |
Volume 11,Issue 1,Year 2022 |
International Journal for Innovative Engineering and Management Research |
712 |
Competency Mapping of Front-line Staff: Key for Success inthe Organized Retail Sector |
M Mallika Rao, A. Udaya Shankar, M. Bhaskara Rao, |
Volume 28,Issue 1,Year 2022 |
Journal of Contemporary Issues in Business and Government |
713 |
RECOGNITION OF HANDWRITTEN DIGIT USING DEEP LEARNING AND CNN |
R. Agilesh Saravanan, M. Sai Teja, Atiya Shaheen, S.Satya Priya, |
Volume 11,Issue 2,Year 2022 |
International Journal for Innovative Engineering and Management Research |
714 |
ASSESSMENT FACTORS INFLUENCING STUDENTS` ACADEMIC ACHIEVEMENT |
Sorie Saidu Kamara, Sundari Dadhabai, |
Volume 25,Issue Special Issue 1,Year 2022 |
Journal of Management Information and Decision Sciences |
715 |
DOUBLE DIP PANDEMIC IMPACT ON PORTFOLIO OF INVESTORS REFERENCE TO SALARIED EMPLOYEES |
P. Madhu Kumar Reddy, V S Prasad Kandi, A. Rama Kumar, |
Volume 9,Issue 1,Year 2022 |
Indian Journal of Finance and Banking |
716 |
RELATIONSHIP BANKING - PROSPECTS FOR INDIAN BANKING SYSTEM |
Mulabagula Geeta, C Naga Sivanand, |
Volume 26,Issue 2,Year 2022 |
Academy of Accounting and Financial Studies Journal |
717 |
CHALLENGES FOR NEW GENERATION ENTREPRENEURS IN ADOPTION OF BLENDED LEARNING: AN EMPIRICAL STUDY |
Priyanka Sehgal, Supriya Bhutiani, Mohammad Jamshed, Manpreet Kaur, Jayaprakash Jala, |
Volume 26,Issue Special Issue 2,Year 2022 |
International Journal of Entrepreneurship |
718 |
Analysis Of The Benefits Of Encouraging Entrepreneurship |
B.Girimurugan , S.Geetha , |
Volume 11,Issue 1,Year 2022 |
International Journal for Innovative Engineering and Management Research |
719 |
DEVELOPMENT OF EFAVIRENZ LOADED PRONIOSOME FORMULATION FOR ENHANCED ORAL BIOAVAILABILITY: AN INVITRO AND IN-VIVO STUDY |
Swarupa Arvapalli, A. Anka Rao, |
Volume 12,Issue 5,Year 2021 |
Journal of Cardiovascular Disease Research |
720 |
RELEVANCE OF FORENSIC IN CYBER SECURITY |
M Varalakshmi , Sailaja Petikam, |
Volume 13,Issue 1,Year 2022 |
International Journal of Advanced Research in Management |
721 |
CAN TAX-BREAKS HELP ENTREPRENEURSHIP TO GROW THE ECONOMY OF A COUNTRY BY ENCOURAGING RISK-TAKING: A REVIEW |
B.Girimurugan , S.Geetha , |
Volume 11,Issue 2,Year 2022 |
International Journal for Innovative Engineering and Management Research |
722 |
A REVIEW ON THE SOURCES OF WORKING CAPITAL LOANS FOR STARTUPS |
D.Praveena Devi, S.Geetha , |
Volume 11,Issue 2,Year 2022 |
International Journal for Innovative Engineering and Management Research |
723 |
Importance of financial structure for startups |
D.Praveena Devi, S.Geetha , |
Volume 11,Issue 2,Year 2022 |
International Journal for Innovative Engineering and Management Research |
724 |
Anti Neutrosophic multi fuzzy ideals of γ near ring |
K. Hemabala , B. Srinivasa Kumar, |
Volume 48,Issue ,Year 2022 |
Neutrosophic Sets and Systems |
725 |
On Neutrosophic Γ-Semirings |
Yella Bhargavi, Akbar Rezaei, |
Volume 47,Issue ,Year 2021 |
Neutrosophic Sets and Systems |
726 |
Applications of Geospatial Technologies in Land Capability Classification of a Macro Watershed |
Syed Hamim Jeelani, Durga Chaitanya Kumar Jagarapu, M Lingadevaru , Asim Rifa Ur Rahman, |
Volume 49,Issue 1,Year 2022 |
Indian Journal of Ecology |
727 |
Airlines Ticket Price Prediction Using Machine learning approach |
Kusam Bhargavi, A. Lahari Sai, K. Thirupathi Rao, |
Volume 10,Issue 2,Year 2022 |
International Journal of Computer Sciences and Engineering |
728 |
Real-Time Human Detection in Video Surveillance |
Chalavadi Sravanth, Gadde Harshavardhan, Kamineni Kavya, Shaik Mohammad Akbar, Ch.M.H. Sai Baba , |
Volume 9,Issue 1,Year 2021 |
International Journal of Computer Sciences and Engineering |
729 |
ROLE OF BANKS AS FINANCIAL SUCCOR AMID COVID FIGHT: AN INDIAN PERSPECTIVE |
Deboshree Chatterjee, Savanam Chandra Sekhar, M. Kishore Babu, |
Volume 9,Issue 1,Year 2022 |
Indian Journal of Finance and Banking |
730 |
Electric Vehicles Battery Charging by Estimating SOC using Modified Coulomb Counting |
A. Srilatha , A. Pandian , |
Volume 6,Issue 2,Year 2022 |
International Journal of Trend in Scientific Research and Development |
731 |
On Lattice Fuzzy Sub Ordered Gamma – Nearrings |
D. Bharathi , K. Balakoteswararao , S. Ragamayi , |
Volume 6,Issue 6,Year 2019 |
International Journal of Scientific Research in Mathematical and Statistical Sciences |
732 |
RURAL BUYING BEHAVIOR TOWARDS SELECT FMCG PRODUCTS |
Savanam Chandra Sekhar, Thunuguntla Mohanlaxmi Radhesyam, Kalla Poojitha, Diya Bagrecha, Gavara Satyasaiganga Akhilkumar, |
Volume 26,Issue 3,Year 2022 |
Academy of Marketing Studies Journal |
733 |
MOTIVATORS TO MOBILE APP ENGAGEMENT: A MULTI-DIMENSIONAL PERSPECTIVE |
Siva Kumar VN, Rao V , Krishna V , |
Volume 26,Issue 3,Year 2022 |
Academy of Marketing Studies Journal |
734 |
CUSTOMER ATTITUDE TOWARDS DIGITAL MARKETING: A STRUCTURAL SNAPSHOT ON VIRAL MARKETING |
Venkateswara Rao P, Venkata Naga Siva Kumar C, Raja Harsha Vardhan B, Tharaka Rama Manigopal Yadav G, Vamsi Krishna K, Dinesh J , |
Volume 26,Issue 3,Year 2022 |
Academy of Marketing Studies Journal |
735 |
CUSTOMER SATISFACTION WITH RELATION TO STAR HOTEL SERVICES AT ANDHRA PRADESH |
Pradeep Kumar Patnaik R, Madhuri K , Uday Prakash Reddy K, Hima Sruthi U, Lasya R , |
Volume 26,Issue 3,Year 2022 |
Academy of Marketing Studies Journal |
736 |
IMPACT OF EMPLOYEE REWARD SYSTEM ON ORGANISATIONAL PERFORMANCE |
Shyamasundar Tripathy, Bindurani Rohidas, |
Volume 2,Issue 9,Year 2022 |
Universe International Journal of Interdisciplinary Research |
737 |
Outcome of Cadmium on Aminergic System and Protective Function of Vitamin-C |
Jyostna.V , Anuhya.G , Ushakiranmayi. Managamuri, Srinuvasulu K , Sudhakar. Poda, |
Volume 5,Issue 2,Year 2018 |
International Journal of Scientific Research in Biological Sciences |
738 |
Improving Rebalanced RSA Against Chosen Ciphertext Attacks |
Ch J.L. Padmaja , V.S. Bhagavan , B. Srinivas , |
Volume 6,Issue 9,Year 2018 |
International Journal of Computer Sciences and Engineering |
739 |
A NEW HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY METHOD FOR THE SEPARATION AND SIMULTANEOUS QUANTIFICATION OF EPTIFIBATIDE AND ITS IMPURITIES IN PHARMACEUTICAL INJECTION FORMULATION |
K. Sri Girija, Bikshal Babu Kasimala, Venkateswara Rao Anna, |
Volume 13,Issue 2,Year 2021 |
International Journal of Applied Pharmaceutics |
740 |
A MODERN APPROACH FOR DRUG DELIVERY IN SOLID LIPID NANOPARTICLE (SLN) |
Suryakumari , G. Durgarao , S. Suresh Babu, K. Venketeswerarao , K. Chinnababu , |
Volume 7,Issue 1,Year 2020 |
European Journal of Pharmaceutical and Medical Research |
741 |
Images of Women in Namitha Gokhale`s Works |
P. V. Vinitha , K. Usha Rani, |
Volume 3,Issue 1,Year 2018 |
International Journal of Trend in Scientific Research and Development |
742 |
METHODS TO PREPARE SOLID DISPERSIONS OF BCS CLASSIFIED DRUGSON THE UTILIZATION OF VARIOUS CARRIERS: AN UPDATED REVIEW |
Suryakumari , G. Durgarao , S. Suresh Babu, K. Venketeswerarao , S. K. Asha Begham, |
Volume 6,Issue 4,Year 2020 |
World Journal of Pharmaceutical and Life Sciences |
743 |
Insilico Molecular Docking Studies of Volatile Compounds Identified by GC-MS from Tagetes Species Against Mamestra brassicae (Linnaeus, 1758) |
S.R. Krishna Motukuri, D. Vijaya Nagini , J. Nallamothu , S. Karthikeyan , |
Volume 20,Issue 3,Year 2021 |
Nature Environment and Pollution Technology |
744 |
Chemical and Pathogen Impacts on Human Health near Aquaculture Areas in West Godavari District of Andhra Pradesh, India |
T Bhaskara Rao, D. Nageswara Rao, P.V.S. Machiraju , |
Volume 20,Issue 3,Year 2021 |
Nature Environment and Pollution Technology |
745 |
Organizational Culture and HR Practices Impact on Firm Performance |
Mannava Sumaja, Y Chitra Rekha, Kolachina Srinivas, |
Volume 7,Issue 3,Year 2020 |
International Journal of Management Research and Social Science |
746 |
Neutrosophic Multi Fuzzy Ideals of ϒ Near Ring |
B. Srinivasa Kumar, K. Hemabala , |
Volume 49,Issue ,Year 2022 |
Neutrosophic Sets and Systems |
747 |
A Study on Employee Attrition using Artificial Neural Networks |
B Sindhura , S V N L Lalitha , Mohammed Sumeiruddin, |
Volume 8,Issue 7,Year 2022 |
International Journal for Modern Trends in Science and Technology |
748 |
REMAND DURING TRIAL AND ITS CONSTITUTIONAL VALIDITY |
A Bala Krishna, Rajan K.J , |
Volume 6,Issue 2,Year 2022 |
International Journal Of Law, Management And Social Science |
749 |
Drag Optimisation of Nose Cone Configuration in Supersonic And Hypersonic Regimes |
A Harikrishna , Vignesh Kumar.M, Anubhav Dasgupta, |
Volume 8,Issue 2,Year 2022 |
Multidisciplinary International Journal |
750 |
Cervical Cancer Prevalence and Associated Risk Factors among Women Employees Working in Star Hotels in Gondar Town, Ethiopia |
Thamimul Ansari Peer Mohamed, Mequanente Dagnaw, P. Srinivasan , G. Mallika , Alemu Tebje, Zewdu Baye, Meera Indracanti, |
Volume 11,Issue 4,Year 2022 |
European Online Journal of Natural and Social Sciences |
751 |
E-CRM INFLUENCE TOWARDS CUSTOMER SATISFACTION AND LOYALTY: AN EMPIRICAL SURVEY ON MOBILE PHONE CONSUMERS |
Vamsi Krishna Burra, Gurram Ramakrishna, Murthy BGK , SK., Shareef J , Padmalatha PSV , SubbaRao MV , |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
752 |
A STUDY ON THE PERFORMANCE OF SBI PRE AND POST-MERGER USING THE CAMEL MODEL |
V S Prasad Kandi, Sai Anvitha V, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
753 |
A STUDY ON THE FACTORS THAT INFLUENCE THE EXPERIENCE OF AN E-BIKE TO ITS USER |
M. Kishore Babu, Annavarapu Vamsidhar Gupta, Kanamarlapudi Raja Manikanta Rithvik Kumar, Durga Prasad Navulla, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
754 |
CUSTOMER EMPOWERMENT AS MEDIATOR BETWEEN CUSTOMER RELATIONSHIP MARKETING AND SATISFACTION LEVEL IN BANKING SECTOR |
Deboshree Chatterjee, Savanam Chandra Sekhar, M. Kishore Babu, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
755 |
A STUDY ON THE AWARENESS OF ACADEMIC PRACTITIONERS IN CLOUD COMPUTING CONCERNING THE INSTITUTES OFFERING TECHNICAL EDUCATION |
Anusha K , Anil Kumar G, Jhansi Lakshmi Kesari, Leela Sesha Sairam Satram, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
756 |
AN EMPIRICAL STUDY ON MARKETING AND HR CHALLENGES IN CONSTRUCTION INDUSTRY - A STUDY WITH REFERENCE TO L&T |
Venkata Ramana J, Manila Ratna, Sai Kalyan Das, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
757 |
IMPACT OF TRANSFORMATIVE LEADERSHIP ON EMPLOYEE PERFORMANCE IN MEDIATION WITH JOB SATISFACTION |
V S Prasad Kandi, Kona Sri Kapardi, Kavya Kobbarisetty, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
758 |
PERFORMANCE OF MUTUAL FUNDS IN INDIA: COMPARATIVE ANALYSIS OF SMALL-CAP AND MID-CAP MUTUAL FUNDS |
V S Prasad Kandi, Karanam Harshitha, Atluri Dhyan, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
759 |
NON-PERFORMING ASSETS: A COMPARATIVE STUDY WITH REFERENCE TO SELECTED PUBLIC AND PRIVATE BANKS |
V S Prasad Kandi, Jetti Amrutha, Muppidi Sheba Susanna, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
760 |
A PRAGMATIC STUDY ON PANIC BUYER BEHAVIOR IN INCESSANTLY AILMENT ABODE, FUELING CHANGES IN CONSUMPTION OF ORGANIC PRODUCTS |
V S Prasad Kandi, P. Madhu Kumar Reddy, Boddula Kalyan, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
761 |
A STUDY ON IMPACT OF DIVIDEND POLICY AND STOCK PRICE VOLATILITY ON HEALTH CARE MARKET |
Venkata Ramana J, Nasika Shamini, Tangirala Sai Nikhil, |
Volume 26,Issue 4,Year 2022 |
Academy of Marketing Studies Journal |
762 |
A STUDY ON MACRO ECONOMIC VARIABLES AND THEIR IMPACT ON GOLD PRICE IN INDIA |
V.N.Sailaja , Akhil Kumar V, Padmini Kota VS, |
Volume 26,Issue 5,Year 2022 |
Academy of Marketing Studies Journal |
763 |
A STUDY ON THE IMPACT OF HUMAN RESOURCE MANAGEMENT PRACTICES ON EMPLOYEE PERFORMANCE |
V.N.Sailaja , Vaishnavi M , Sai Krishna T, |
Volume 26,Issue 5,Year 2022 |
Academy of Marketing Studies Journal |
764 |
A STUDY ON CONSUMER`S PERCEPTION TOWARDS DIGITAL PAYMENTS IN RURAL AND URBAN AREAS |
Balaji Ch , Meghana K , Dheeraj Sai V, |
Volume 26,Issue 5,Year 2022 |
Academy of Marketing Studies Journal |
765 |
A STUDY ON CUSTOMER SATISFACTION OF BSNL: A CASE STUDY OF KRISHNA DISTRICT |
Balaji C.H , Revanth P , Dilip Chowdary N, |
Volume 26,Issue 5,Year 2022 |
Academy of Marketing Studies Journal |
766 |
THE ROLE OF 3RD PARTY LOGISTICS IN BRINGING EFFICIENCY & EFFECTIVENESS AMONG THEIR DISTRIBUTION CENTERS |
B.Kishore Babu, A. Udaya Shankar, Padma Sai Y, Hsdinesh , |
Volume 26,Issue 6,Year 2022 |
Academy of Marketing Studies Journal |
767 |
IMPACT OF ORGANISED RETAIL MARKETING ON CUSTOMER SATISFACTION |
Daniel Pilli, Soujanya Konka, |
Volume 26,Issue 6,Year 2022 |
Academy of Marketing Studies Journal |
768 |
COMPREHENSIVE STUDY ON IMPACT OF WORK FROM HOME AGAINST EMPLOYEE ENGAGEMENT AND PRODUCTIVITY IN COVID-19 PANDEMIC |
M THYAGARAJU , Krishna Priya, Chudamani Ramineni, Nagamani Chippada, |
Volume 26,Issue 6,Year 2022 |
Academy of Marketing Studies Journal |
769 |
SHORT TERM LIQUIDITY OF SBI GLOBAL FACTORS LTD AND IFCI FACTORS LTD- A COMPARITIVE STUDY |
Siraj Basha Mohammed, Podile Venkateswara Rao, Durga , Venkata Naga Siva Kumar Challa, |
Volume 26,Issue 6,Year 2022 |
Academy of Marketing Studies Journal |
770 |
MARKETING OF DESIGNER EGGS: A NEED FOR THE HOUR IN INDIA |
Kishore Babu, |
Volume 26,Issue 6,Year 2022 |
Academy of Marketing Studies Journal |
771 |
SYSTEMATIC LITERATURE REVIEW ON IMPACT OF AR IN MARKETING OVER CONSUMERS |
Ritika Nandi, Vemulakash , Harshitareddy , |
Volume 9,Issue 8,Year 2022 |
European Journal of Molecular & Clinical Medicine |
772 |
UNDERSTANDING TOTAL REWARDS FOR EMPLOYEES |
Yeggidi Shravan, S. Varshitha Sai Priya, D. Sai Pranay, |
Volume 9,Issue 8,Year 2022 |
European Journal of Molecular & Clinical Medicine |
773 |
A STUDY ON TECHNICAL PROBLEMS RELATED TO ATM AND INTERNET BANKING SERVICES: A COMPARATIVE STUDY BETWEEN ANDHRA BANK AND ICICI BANKS |
Krishnamurthy Naidu. S, Rambabu. K , Rama Swathi R.S.V, Satyanarayana. D , |
Volume 27,Issue 4,Year 2023 |
Academy of Marketing Studies Journal |
774 |
IS PATIENT EXPERIENCE THE NEW NORMAL IN HEALTHCARE SECTOR? |
Madasu Bhaskara Rao, Madasu Mallika Rao, Udaya Shankar, Veerapaneni Lohitha, |
Volume 27,Issue 2,Year 2023 |
Academy of Marketing Studies Journal |
775 |
OVER VIEW OF CARBON MARKET IN INDIA |
B. Kishore Babu, |
Volume 27,Issue 2,Year 2023 |
Academy of Marketing Studies Journal |
776 |
SMART FACTORY |
B. Kishore Babu, |
Volume 27,Issue 2,Year 2023 |
Academy of Marketing Studies Journal |
777 |
DIGITAL PAYMENT EXPANSION: A BOON FOR THE TRAVEL AND TOURISM INDUSTRY IN INDIA |
Savanam Chandra Sekhar, Nishitha, P , Nikas Reddy G.S.S, Pravallika Reddy M, Lahari Chowdary. V, Anjani. R , |
Volume 27,Issue 2,Year 2023 |
Academy of Marketing Studies Journal |
778 |
MSMES SUSTAINABILITY IN INDIA |
B. Kishore Babu, |
Volume 27,Issue 2,Year 2023 |
Academy of Marketing Studies Journal |
779 |
THE IMPACT OF MOBILE WALLET SERVICES IN CASH-LESS ECONOMY THROUGH THE DIGITAL REVOLUTION |
Sreeram Kumar, Venu Madhav, |
Volume 27,Issue 1,Year 2023 |
Academy of Marketing Studies Journal |
780 |
TWO DIMENSIONAL HOLOGRAPHIC DISPLAY WITH REMOTE CONTROL |
Sai Teja Makani, |
Volume 14,Issue 4,Year 2023 |
International Journal of Electrical Engineering and Technology |
781 |
STREAMLINING AWS SERVERLESS DEPLOYMENTS: A BITBUCKET PIPELINE APPROACH |
Sai Teja Makani, |
Volume 4,Issue 1,Year 2023 |
International Journal of Computer Applications |
782 |
A NOVEL SYSTEM USING IOT TO MONITOR CONTINGENCY IN AQUA CULTURE |
N.Bhupesh Kumar, SK.Chanbasha , Hinaismat , S.F.Choragudi , |
Volume 10,Issue 4,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |