| 1 |
OPTIMAL BIDDING STRATEGIES AND PROFIT MAXIMIZATION FOR MICRO GRID COMBINATIONS IN ELECTRIC ENERGY MARKET IN INDIAN RESTRUCTURED ENVIRONMENT |
Pramesh Kumar, S.K. Bharadwaj , |
Volume 11,Issue 6,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 2 |
OPTIMIZATION OF FRICTION FACTOR FOR AEROSPACE DUCT OF EQUIPMENT COOLING SYSTEM OF AIRCRAFT |
Neeraj Chaurasia, S.P.S. Rajput , |
Volume 10,Issue 2,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 3 |
A CRITICAL REVIEW OF COUNTER MEASURE OF SCOUR AROUND A BRIDGE PIER |
Abhijit Saha, H.L.Tiwari , |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
| 4 |
DESIGNING THE REAR UPRIGHT OF AN ALLTERRAIN VEHICLE (ATV) THROUGH A PROCESS METHODOLOGY |
Sourabh Malviya, |
Volume 10,Issue 8,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 5 |
THE IDEALIZED HERITAGE VILLAGE: SURVEYING THE PUBLIC PERCEPTION FOR A SUSTAINABLE DEVELOPMENT |
Preeti Nair, Devendra Pratap Singh, Navneet Munoth, |
Volume 11,Issue 11,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 6 |
DEVELOPMENT OF CNTS REINFORCED METAL MATRIX COMPOSITES AND THEIR MECHANICAL AND TRIBOLOGICAL BEHAVIOUR: A REVIEW |
Madhusudan Baghel, CM Krishna , |
Volume 12,Issue 1,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 7 |
DEVELOPMENT AND PERFORMANCE EVALUATION OF CABINET TYPE SOLAR DRYER BY USING ROUGHENED ABSORBER COLLECTOR |
J.L. Bhagoria , Sanjeev Kumar Yadav, |
Volume 9,Issue 11,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 8 |
EFFECT OF HEAT TREATMENT AND HOT FORGING ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF AL6061-AL2O3 NANO COMPOSITES |
M.M.U. Qureshi , Rajesh Purohit, |
Volume 12,Issue 2,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 9 |
DEVELOPMENT AND TESTING OF AUTOMOTIVE GEARS USING ALUMINIUM MATRIX NANO COMPOSITES |
M.M.U. Qureshi , Rajesh Purohit, |
Volume 12,Issue 2,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 10 |
HEAT TRANSFER IMPROVEMENT IN A SOLAR AIR HEATER BY USING DIFFERENT TYPES OF ARTIFICIAL ROUGHNESS: A REVIEW |
J L Bhagoria , Yogesh Agrawal, |
Volume 9,Issue 9,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 11 |
AN EXPERIMENTAL INVESTIGATION OF SINGLE SLOPED BASIN TYPE SPHERICAL FLOATING JUTE CLOTH ABSORBERS SOLAR STILL |
Abhay Agrawal, R S Rana , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 12 |
INFLUENCE OF QUINOLINE ON PERFORMANCE FCC CATALYST AND ADDITIVES FOR CRACKING OF N-HEXANE |
Jitendra Kumar , Bharat Modhera, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 13 |
ESTABLISHING PROCESS FOR DESIGNING OF ENERGY EFFICIENT BUILDINGS |
Prateek Manke, Yogesh Garg, Vinay M. Das, |
Volume 6,Issue 8,Year 2015 |
International Journal of Advanced Research in Engineering and Technology |
| 14 |
DEMAND BASED OPTIMAL PERFORMANCE OF A HYDROELECTRIC POWER PLANT |
Shambhu Ratan Awasthi, Vishnu Prasad, Saroj Rangnekar, |
Volume 4,Issue 7,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 15 |
PERFORMANCE EVALUATION OF TURBULENCE MODELS FOR FLOW SIMULATION OF DOUBLE SUCTION CENTRIFUGAL PUMP |
Shyam Narayan Shukla, Ruchi Khare, Vishnu Prasad, |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
| 16 |
OPTIMIZATION OF FACILITY DESIGN BY USING MATLAB PROGRAMME |
Abhishek Kumar Jain, P. M. Mishra , |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 17 |
OPTIMIZATION OF MANUFACTURING PROCESS USING GENETIC ALGORITHM BY OPTIMAL MACHINE COMBINATION: MATLAB SIMULATION & RESULTS |
Sharad Kumar Rathore, Pushyamitra Mishra, |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 18 |
PERFORMANCE OF A BIOMASS DRIER BASED ON EXERGY ANALYSIS |
V. Praveen Raj, S. Dhanushkodi , D. George Oliver, K. Sudhakar , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 19 |
EXERGY LOSS ANALYSIS OF FORCED CONVECTION SOLAR DRYER |
S. Baranitharan , S. Dhanushkodi , K. Sudhakar , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 20 |
ENERGY AND EXERGY ANALYSIS OF A NATURAL CONVECTION SOLAR DRYER |
R. Elavarasan , S. Dhanushkodi , K. Sudhakar , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 21 |
FIRST AND SECOND LAW EFFICIENCIES OF A SOLAR BIOMASS HYBRID DRYER |
T. Praveen Kumar, S. Dhanushkodi , K. Sudhakar , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 22 |
PERFORMANCE STUDY OF FORCED CONVECTION SOLAR DRYER WITH REFLECTOR |
A.Nandakumar , S.Dhanushkodi , K. Panner Selvam, K. Sudhakar , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 23 |
EXPERIMENTAL ANALYSIS OF A NATURAL CONVECTION SOLAR DRYER WITH A REFLECTOR |
S. Sivasundar , S.Dhanushkodi , K. Panner Selvam, K. Sudhakar , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 24 |
PERFORMANCE ENHANCEMENT OF A HYBRID DRYER WITH A REFLECTOR |
D. Selvam , S.Dhanushkodi , D.George Oliver, K. Sudhakar , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 25 |
OPTIMIZATION OF COMPLEX INTEGRATED PRODUCTION LINE USING GA-PSO TECHNIQUE AT CLUSTER LEVEL: MODELING & SIMULATION |
Sharad Kumar Rathore, Pushyamitra Mishra, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 26 |
PERFORMANCE ENHANCEMENT AND EMISSION REDUCTION OF CI ENGINE USING DUAL BLEND BIODIESEL |
Vivek Kumar Nema, Alok Singh, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 27 |
EXPERIMENTAL INVESTIGATION TO ANALYZE THE EFFECT OF VARIATION IN INTAKE AIR TEMPERATURE ON THE THROTTLE RESPONSE OF THE S.I. ENGINE |
Sanjay Chhalotre, Prashant Baredar, Sanjay Soni, |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 28 |
URBAN FLOOD VULNERABILITY ASSESSMENT OF BHOPAL, M.P., INDIA |
Rajshree Kamat, |
Volume 10,Issue 1,Year 2019 |
International Journal of Civil Engineering and Technology |
| 29 |
GIS BASED SOIL EROSION MODELLING |
Bikram Prasad, H.L Tiwari , |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
| 30 |
SIMULATION OF RAINFALL RUNOFF OF SHIPRA RIVER BASIN |
H.L. Tiwar , Ankit Balvanshi, Deepak Chouhan, |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
| 31 |
FINITE ELEMENT ANALYSIS OF DEEP DRAWING PROCESS TO INVESTIGATE EFFECT OF FRICTION |
Chandra Pal Singh, Geeta Agnihotri, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 32 |
EXPERIMENTAL PERFORMANCE ANALYSIS OF ALTERNATIVE COOLING PAD MADE BY AGRICULTURAL WASTE FOR DIRECT EVAPORATIVE COOLING SYSTEM |
Amrat Kumar Dhamneya, S P S Rajput , Alok Singh , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 33 |
BARRIERS TO LEAN IMPLEMENTATION IN SMALL AND MEDIUM-SIZED INDIAN ENTERPRISES |
Arvind Kumar Shrimali, V. K. Soni , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 34 |
A MODERN TWO DOF CONTROLLER FOR GRID INTEGRATION WITH SOLAR POWER GENERATOR |
Sweeka Meshram, Ganga Agnihotri, Sushma Gupta, |
Volume 3,Issue 3,Year 2012 |
International Journal of Electrical Engineering and Technology |
| 35 |
TRANSIENT STABILITY ENHANCEMENT BY ANN BASED ADAPTIVE LOAD SHEDDING |
Mukesh Kumar Kirar, Ganga Agnihotri, |
Volume 3,Issue 3,Year 2012 |
International Journal of Electrical Engineering and Technology |
| 36 |
SPEED CONTROL OF ASYNCHRONOUS MOTOR USING SPACE VECTOR PWM TECHNIQUE |
Vishal Rathore, Manisha Dubey, |
Volume 3,Issue 3,Year 2012 |
International Journal of Electrical Engineering and Technology |
| 37 |
DESIGN AND SIMULATION OF SINGLE PHASE ZSOURCE INVERTER FOR UTILITY INTERFACE |
P.H. Zope , Ajay Somkuwar, |
Volume 1,Issue 1,Year 2010 |
International Journal of Electrical Engineering and Technology |
| 38 |
COMPARISON OF RESPONSE TO UNBALANCE OF OVERHUNG ROTOR SYSTEM FOR DIFFERENT SUPPORTS |
Rohit Tamrakar, N.D. Mittal , |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 39 |
EFFECT OF DIFFUSER LENGTH ON PERFORMANCE CHARACTERISTICS OF ELBOW DRAFT TUBE WITH DIVIDING PIER |
Rahul Bajaj, Ruchi Khare, Vishnu prasad, |
Volume 5,Issue 5,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 40 |
THERMODYNAMIC ANALYSIS OF YEAR ROUND AIR CONDITIONING SYSTEM FOR VARIABLE WET BULB TEMPERATURE OF OUTLET AIR OF PRE-HEATING COIL (COLD AND DRY WEATHER) |
Shankar Kumar, S.P.S. Rajput , Arvind Kumar, |
Volume 6,Issue 4,Year 2015 |
International Journal of Mechanical Engineering and Technology |
| 41 |
OPTIMIZATION TECHNIQUES FOR WATER SUPPLY NETWORK: A CRITICAL REVIEW |
Minakshi Shrivastava, Vishnu Prasad, Ruchi Khare, |
Volume 5,Issue 9,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 42 |
AN EXPERIMENTAL INVESTIGATION OF ENGINE COOLANT TEMPERATURE ON EXHAUST EMISSION OF 4 STROKE SPARK IGNITION MULTI CYLINDER ENGINE |
Ajay K. Singh, A. Rehman , |
Volume 4,Issue 2,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 43 |
ANALYSIS OF BAFFLE WALL GAP IN THE DESIGN OF STILLING BASIN MODEL |
H. L. Tiwari , |
Volume 4,Issue 4,Year 2013 |
International Journal of Civil Engineering and Technology |
| 44 |
THERMODYNAMICS SIMULATION OF AUTOMOBILE EVAPORATIVE AIR CONDITIONING SYSTEM (EVAPORATIVE TEST RIG) WITH RESULT AND DISCUSSION WHEN AUTOMOBILE VELOCITY IS 60KM/HR |
R.Rajvaidya , S.P.S. Rajput , |
Volume 3,Issue 2,Year 2012 |
International Journal of Mechanical Engineering and Technology |
| 45 |
EFFECT OF RUNNER SOLIDITY ON LOSSES IN MIXED FLOW HYDRAULIC TURBINE |
Ruchi Khare, |
Volume 5,Issue 6,Year 2014 |
International Journal of Civil Engineering and Technology |
| 46 |
COMBATING HYDROGEN EMBRITTLEMENT WITH GRAPHENE BASED COATINGS |
Manish Vishwakarma, Siraj Ahmed, Amit Khare, |
Volume 10,Issue 6,Year 2019 |
International Journal of Advanced Research in Engineering and Technology |
| 47 |
EFFECT OF INERTIA WEIGHT FUNCTIONS OF PSO IN OPTIMIZATION OF WATER DISTRIBUTION NETWORK |
Minakshi Shrivastava, Vishnu Prasad, Ruchi Khare, |
Volume 6,Issue 5,Year 2015 |
International Journal of Advanced Research in Engineering and Technology |
| 48 |
THERMODYNAMIC SIMULATION OF YEAR ROUND AIR CONDITIONING SYSTEM FOR VARIABLE RELATIVE HUMIDITY OF ATMOSPHERIC AIR |
Shankar Kumar, S.P.S. Rajput , Arvind Kumar, |
Volume 6,Issue 4,Year 2015 |
International Journal of Advanced Research in Engineering and Technology |
| 49 |
PERI URBAN DEVELOPMENT IN DEVELOPING COUNTRIES |
Manita Saxena, Supriya Vyas, |
Volume 10,Issue 1,Year 2019 |
International Journal of Civil Engineering and Technology |
| 50 |
AN ANALYSIS OF CRATER DETECTION IN MOON |
Arpita Baronia, Jyoti Sarup, Sumit Gupta, |
Volume 9,Issue 13,Year 2018 |
International Journal of Civil Engineering and Technology |
| 51 |
ACCURACY ASSESSMENT OF PROJECTIVE TRANSFORMATION BASED HYBRID APPROACH FOR AUTOMATIC SATELLITE IMAGE REGISTRATION |
Harshlata Vishwakarma, S. K. Katiyar , |
Volume 9,Issue 13,Year 2018 |
International Journal of Civil Engineering and Technology |
| 52 |
COMPATIBILITY CHECK OF ELASTIC CRITICAL MOMENT EVALUATION OF ROLLED CHANNEL SECTION BEAM |
Juned Raheem, S.K Dubey , Nitin Dindorkar, |
Volume 9,Issue 10,Year 2018 |
International Journal of Civil Engineering and Technology |
| 53 |
PRIORITY BASED FOCUSED WEB CRAWLER |
Jaytrilok Choudhary, Devshri Roy, |
Volume 4,Issue 4,Year 2013 |
International Journal of Computer Engineering and Technology |
| 54 |
EFFECTS OF DRIFT IN SOFT STORIED RCC BUILDINGS |
M.P. Mishra , S.K. Dubey , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 55 |
EFFECT ON SETTLEMENT REDUCTION DUE TO METHOD OF CONSTRUCTION OF STONE COLUMN: AN EXPERIMENTAL SMALL SCALE STUDY |
Sareesh Chandrawansh, Rakesh Kumar, P.K. Jain , |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 56 |
MORPHOMETRIC ANALYSIS OF RAJGARDH WATERSHED OF MADHYA PRADESH |
Indranil Singh, Ruchi Khare, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
| 57 |
GEOTECHANICAL PROPERTIES AND STRENGTH CHARACTERISATION OF BAUXITE RESIDUE |
D. Kishan , S.S. Kushwaha , Nitin Dindorkar, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 58 |
PERFORMANCE OF UASB REACTOR AS A COMMON EFFLUENT TREATMENT PLANT: A CASE STUDY |
R. S. Parihar , P. Baredar , A.K. Sharma , R.L. Rajput , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 59 |
PRIORITIZATION AND ASSESSMENT OF CRITICAL RISKS OF PUBLIC PRIVATE PARTNERSHIP HIGHWAY PROJECTS IN INDIA USING ANALYTICAL HIERARCHICAL PROCESS |
Pawan Deshpande, Siddhartha Rokade, |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 60 |
SUITABILITY OF COLLAPSE MECHANISM ANALYSIS FOR A SOFT-STORIED BUILDING |
M.P. Mishra , S.K. Dubey , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 61 |
RISK MITIGATION STRATEGIES FOR PUBLIC PRIVATE PARTNERSHIP HIGHWAY PROJECTS IN INDIA |
Pawan Deshpande, Siddhartha Rokade, |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 62 |
UTILIZATION OF HDPE AND PET WASTES IN BITUMINOUS CONCRETE WEARING SURFACE OF FLEXIBLE PAVEMENTS |
Siddhartha Rokade, Rakesh Kumar, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 63 |
ASSESSMENT OF EFFECTIVENESS OF VERTICAL DEFLECTION TYPE TRAFFIC CALMING MEASURES AND DEVELOPMENT OF SPEED PREDICTION MODELS IN URBAN PERSPECTIVE |
Siddhartha Rokade, Rakesh Kumar, Varsha Rokade, Shakti Dubey, Vaibhav Vijayawargiya, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 64 |
POSSIBILITY OF DRIFT CONTROL IN SOFTSTORIED RCC BUILDINGS IN HIGHER SEISMIC ZONES |
M.P. Mishra , S.K. Dubey , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 65 |
SETTLEMENT CHARACTERISTICS OF SOFT CLAY REINFORCED WITH STONE COLUMN: AN EXPERIMENTAL SMALL SCALE STUDY |
Sareesh Chandrawanshi, Rakesh Kumar, P.K. Jain , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 66 |
ASSESSMENT OF RISKS IN PUBLIC PRIVATE PARTNERSHIP HIGHWAY PROJECTS IN INDIA USING FUZZY SYNTHETIC EVALUATION |
Pawan Deshpande, Siddhartha Rokade, |
Volume 8,Issue 11,Year 2017 |
International Journal of Civil Engineering and Technology |
| 67 |
WATER HYACINTH: CONTROL AND UTILIZATION |
Harshit Sharma, M.S. Chauhan , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 68 |
Analysis of Ground Water Resources |
Ajay K. Gedam, |
Volume 4,Issue 6,Year 2016 |
International Journal of Engineering and Technology Research |
| 69 |
Assessing the Critical Success Factors and Barriers for Six Sigma Implementation in Auto Component Indian SMEs |
Dharmendra Tyagi, V. K. Soni , V. K. Khare , |
Volume 4,Issue 2,Year 2016 |
International Journal of Research in Mechanical Engineering |
| 70 |
Designing an Automotive Brake Disc |
Pranay Tiwari, Pranjal Agrawal, Devanjan Mishra, |
Volume 3,Issue 5,Year 2015 |
International Journal of Engineering and Technology Research |
| 71 |
NUMERICAL SIMULATION FOR CRITICAL ELASTIC MOMENT OF STEEL BEAMS WITH DIFFERENT CROSS SECTIONS |
Juned Raheem, S.K Dubey , Nitin Dindorkar, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
| 72 |
A REVIEW ON PREPERATION OF ROOF TILES USING INDUSTRIAL WASTE AND FIBRES |
Arun Kumar Sharma, Prashant Baredar, Anil Kumar Dubey, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
| 73 |
AN APPROACH FOR LINE FEATURE EXTRACTION USING HOUGH TRANSFORM FOR REMOTE SENSING IMAGES |
Harshlata Vishwakarma, Sunil Kumar Katiyar, |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
| 74 |
ARTIFICIAL NEURAL NETWORK BASED DATA MINING APPROACH FOR HUMAN HEART DISEASE PREDICTION |
Shikha Dixit, Appu Kuttan. K.K, |
Volume 5,Issue 6,Year 2014 |
International Journal of Computer Engineering and Technology |
| 75 |
A NOVEL ATTACK DETECTION TECHNIQUE TO FIND ATTACK IN WATERMARKED IMAGES WITH PSNR AND RGB INTENSITY |
NEHA CHAUHAN, P. S. PATHEJA , AKHILESH A WAOO, SANJAY SHARMA, |
Volume 3,Issue 1,Year 2013 |
International Journal of Electronics and Communication Engineering Research and Development |
| 76 |
Dynamic Relations Between Foreign Exchange Rate and Indian Stock Market: A Variance Decomposition Analysis with Var Method |
Nenavath Sreenu, KS Sekhar Rao, Sonal Trivedi, |
Volume 25,Issue 6,Year 2021 |
Academy of Accounting and Financial Studies Journal |
| 77 |
Pulveriser Mill Performance Analysis & Optimisation in Super Critical Thermal Power Plant using imported coal |
Ashish Kumar Rai, Mukesh Pandey, Prashant Baredar, |
Volume 4,Issue 3,Year 2018 |
International Journal for Research in Engineering Application & Management |
| 78 |
Intertied AC-DC Hybrid System Power Sharing Through Intelligent Droop Controller |
Preeti Gupta, Pankaj Swarnkar, |
Volume 8,Issue 1,Year 2018 |
Engineering, Technology & Applied Science Research |
| 79 |
t-INDEPENDENT COMPONENT ANALYSIS FOR SVM CLASSIFICATION OF DNA- MICROARRAY DATA |
AZIZ R , SRIVASTAVA N , VERMA C.K , |
Volume 6,Issue 1,Year 2015 |
International Journal of Bioinformatics Research |
| 80 |
Kerberos based Data security in Research & Production Honey Pot |
Apurva Saxena, Pratima Gautam, Anubha Dubey, |
Volume 5,Issue 1,Year 2019 |
EPH - International Journal of Science and Engineering |
| 81 |
IMPACT OF EXCHANGE RATE AND INFLATION RATE ON STOCK MARKET RETURN VOLATILITY IN INDIA |
Nenavath Sreenu, KS Sekhar Rao, Suresh Naik, |
Volume 26,Issue Special Issue 1,Year 2022 |
Academy of Marketing Studies Journal |
| 82 |
DEVELOPING AN INTEGRATED MODEL TO ANALYSE AND FILTER REAL TIME SOCIAL MEDIA CONTENT |
Aditya Goel, |
Volume 5,Issue ,Year 2019 |
International Journal Of Innovations In Applied Sciences And Engineering |
| 83 |
EMPLOYABILITY OF THE TEXT MINING TOOLS FOR SENTIMENT ANALYSIS FROM SOCIAL MEDIA NETWORK |
Aditya Goel, |
Volume 5,Issue ,Year 2019 |
Multidisciplinary International Journal |
| 84 |
Forecasting Discharge Level time Series on Statistical Parametric Approach using Hydrological Data |
S. Sathish , S.K. Khadar Babu, |
Volume 6,Issue 11,Year 2020 |
International Journal of Scientific Research In Multidisciplinary Studies |
| 85 |
Movie Recommendation System: Content-Based and Collaborative Filtering |
S. K. Raghuwanshi , R. K. Pateriya , |
Volume 6,Issue 4,Year 2018 |
International Journal of Computer Sciences and Engineering |
| 86 |
PREDICTING SENTIMENT FROM MOVIE REVIEWS USING LEXICON BASED MODE |
Binita Verma, Ramjeevan Singh Thakur, Shailesh Jaloree, |
Volume 6,Issue 10,Year 2018 |
International Journal of Computer Sciences and Engineering |
| 87 |
DEVELOPING AN INTERNET OF THINGS BASED ROBOT FOR ENHANCING THE EFFICACY IN SPRAYING OF PESTICIDES |
Aditya Goel, |
Volume 18,Issue 5,Year 2019 |
International Journal Of Advances In Engineering Research |
