| 1 |
SMART GLOVES WITH ANDROID VOICE OUT |
D. Chaitanya , G. Karthik Reddy, P. Ramesh , U. Pavan Kalyan, |
Volume 11,Issue 2,Year 2019 |
International Journal of Electronics and Communication Engineering and Technology |
| 2 |
DESIGN AND ANALYSIS OF ULTRA LOW POWER VOLTAGE AND CURRENT REGULATORS |
K. Venkata Ramana, B. Sai Sri, M. Pooja , Ch. Lavanya , R. Rushikesh , |
Volume 11,Issue 2,Year 2020 |
International Journal of Electronics and Communication Engineering and Technology |
| 3 |
UNDERGROUND CABLE ACOUSTIC FAULT ROUTE TRACKING AND DISTANCE IDENTIFYING IN COAL MINE USING INTERNET OF THINGS |
Bhavana Godavarthi, G Manu , A Sudhakar , Paparao Nalajala, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 4 |
AN EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF CEMENT WITH BAGASSE ASH IN CONCRETE MIX |
P.Bhargavi , Kallempudi Murali, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
| 5 |
A STUDY ON HOMOGENIZATION OF THE CONCEPT, SUSTAINABLE DEVELOPMENT IN MANAGEMENT EDUCATION IN INDIA |
P. Ramesh , Bethapudi Satyavani, Bhaskara Rao Kancherla, B Omnamasivaya , N. Usharani , |
Volume 11,Issue 9,Year 2020 |
International Journal of Management |
| 6 |
A STUDY ON THE IMPACT OF ORGANIZATIONAL INNOVATION ON THE ORGANIZATION PERFORMANCES OF HOSPITALITY FIRMS (WITH REFERENCE TO SOUTH INDIA) |
Ch.V Ramya , Bethapudi Satyavani, B. Omnamasivaya , N. Usharani , P. Ramesh , |
Volume 11,Issue 10,Year 2020 |
International Journal of Management |
| 7 |
USAGE OF PARALLEL MANIPULATOR FOR EXTERNAL CHEST COMPRESSIONS DURING CARDIOPULMONARY RESUSCITATION - AN EXPERIMENTAL STUDY ON FEEDBACK MANIKIN |
G. Babu Rao, M.Wilson Kumar, Mona Sahu , G. Anada Rao, Nallapaneni Manoj Kumar, |
Volume 9,Issue 9,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 8 |
DYNAMIC STABILITY ANALYSIS OF STRUCTURAL MEMBERS |
Subbaratnam.B , D.V. Ramana Reddy, A Udaya Deepika, G.V.R. Seshagiri Rao, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 9 |
FILM COOLING OF TURBINE BLADE SURFACE WITH EXTENDED EXIT HOLES |
K. Vijaya Krishna Varma, M.V. Babu Tanneru, |
Volume 8,Issue 2,Year 2017 |
International Journal of Design and Manufacturing Technology |
| 10 |
ANALYSIS OF GAS TURBINE BLADE ASSEMBLY TO EVALUATE THE PERFORMANCE OF VARIOUS NICKEL BASED ALLOYS |
P.Kezia , B.L.N. Krishna Sai, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 11 |
DESIGN AND IMPLEMENTATION OF SMART AUTOMATION SYSTEM |
N Prameela , N Tulasichitra , R Karthik , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 12 |
IMPLEMENTATION OF AUTOMATIC TEST EQUIPMENT FOR LINE REPLACEABLE UNITS OF ACTIVE PHASED ARRAY RADAR |
R Karthik , K Jyothi , T Vijetha , T Pardhu , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 13 |
ATE FOR ACTIVE PHASED ARRAY RADAR - MINI REVIEW |
K Jyothi , E Amareshwar , T Vijetha , T Pardhu , R Karthik , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 14 |
DESIGN AND IMPLEMENTATION OF VIRTUAL LABORATORY USING LabVIEW & myDAQ |
Belkeri Sai Prakash, Mandalapu Lavanya Sree, R Sai Saranya, R Karthik , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 15 |
DESIGN AND SIMULATION OF A MEANDERLINE ANTENNA FOR CR APPLICATIONS |
T Vijetha , R Karthik , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 16 |
EFFECT OF MAHUA OIL METHYL ESTER WITH ADDITIVE AS AN IC ENGINE FUEL IN COMBINATION WITH DIESEL IN CI ENGINE: AN EXPERIMENTAL INVESTIGATION |
K. Sandeep Kumar, NEC Prasad , P. Bridjesh , |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 17 |
DYNAMIC ANALYSIS OF CANTILEVER BEAM |
Sreekanth Sura, Alka Sawale, M Satyanarayana Gupta, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 18 |
AUTOMATIC STREET LIGHTS ON/OFF APPLICATION USING IOT |
K. Nirosha , B. Durga Sri, Ch. Mamatha , B. Dhanalaxmi , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 19 |
OVERVIEW OF H.265 STANDARDS |
P.Yakaiah , Chandra Shekhar Jakkena, A.V.Paramkusam , G Manisha , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 20 |
AN EFFICIENT MOTION ESTIMATION MULTIPLE REFERENCE FRAMES ALGORITHM |
A.V.Paramkusam , G. Shravan Kumar, D. Naresh Kumar, M Hima Bindu, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 21 |
EFFECT OF POWER NUMBER ON HEAT TRANSFER RATES IN A HELICAL COIL UNDER TURBULENT FLOW |
Pulluru Sunil Kumar, Kanna Ashok Reddy, Veeram Mahindar Reddy, P. Ramakrishna Reddy, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 22 |
EXPERIMENTAL ANALYSIS OF CONVECTIVE HEAT TRANSFER AND SECOND LAW ANALYSIS IN A HELICAL COIL UNDER TURBULENT CONDITION |
Mudhuganti Mahender Reddy, Kanna Ashok Reddy, P.Poornima Reddy, N Santhisree , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 23 |
OPTIMIZATION OF WEDM PROCESS PARAMETERS ON AL 7075 BY USING TAGUCHI TECHNIQUE AND RESPONSE SURFACE METHODOLOGY (RSM) |
T. Vijaya Babu, S. Venukumar , Surya Prakash, N Santhisree , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 24 |
REVIEW AND COMPARISON ON SOFTWARE PROCESS MODELS |
B Subbarayudu , Srija Harshika D, E. Amareswar , R Gangadhar Reddy, Kishor Kumar Reddy C, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 25 |
PUBLIC WATER SUPPLY MONITORING TO AVOID TAMPERING AND WATERMAN FRAUD USING SMART WATER METER SYSTEM |
Anil Gantala, Paparao Nalajala, N Vasudheva Reddy, Bhavana Godavarthi, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 26 |
SAVONIUS WIND TURBINE DESIGN AND VALIDATION-AN MANUFACTURING APPROACH |
M. Sunil Kumar, VVSH Prasad , C. Labesh Kumar, K Ashok Reddy, |
Volume 8,Issue 9,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 27 |
EMPLOYEE WELFARE MEASURES AT VAZIR SULTAN TOBACCO INDUSTRIES LTD., HYDERABAD: AN INSIGHT |
V. Sreehari , G. Ramesh , G. Vinesh Kumar, M. Naveen Kumar Reddy, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 28 |
DESIGN AND ANALYSIS OF INDEXING TYPE DRILL JIG FOR A MISSSILE COMPONENT |
S R V Narsaiah .S , L.Radhakrishna , Lakshmipathi Yerra, Prasanna V , |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 29 |
GENERAL FORMULA TO ESTIMATE FREQUENCY OF INITIALLY STRESSED BEAMS WITH COMPLEX SECONDARY EFFECTS |
B. Subbaratnam , S. Naresh Kumar, G. Arun Reddy, C. Satya Sandeep, |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 30 |
BEST KEYWORD COVER SEARCH USING KEYWORD-NNE ALGORITHM |
K Pushpa Rani, M Jhansi , Chandrasekhara Reddy T, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 31 |
FRACTALS IN 4-DIMENSIONS - A STUDY |
Bulusu Rama, K. Sai Prasad, Surya Prabha, B. Suresh Kumar, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 32 |
LOAD BALANCING TECHNIQUE IN CLOUD COMPUTING ENVIRONMENT |
Ramesh A , Raghunadha Reddy T, Neeraja K , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 33 |
SMART ENERGY METER FOR DETECTING FRAUDULENT ELECTRICITY CONNECTIONS |
M Jhansi , K Pushpa Rani, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 34 |
EXPERIMENTAL INVESTIGATION ON CI ENGINE FUELLED WITH THE BLENDS OF OLIVE OIL METHYL ESTER AND DIESEL |
S. Navya Sree, K. Sandeep Kumar, EC.Prasad Nidumolu, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 35 |
REGION OF INTEREST (ROI)-BASED IMAGE COMPRESSION FOR TELEMEDICINE APPLICATIONS |
Syam Babu Vadlamudi, Koppula Srinivas Rao, A L Siridhara , R Karthik , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 36 |
ANALYSIS OF RING STIFFENED CYLINDRICAL SHELLS USING FUNCTIONALLY GRADED MATERIAL |
M V Babu Tanneru, Lakshmipathi Yerra, K Vijaya Krishna Varma, Chaithanya K , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 37 |
EXPERIMENTAL INVESTIGATION ON HEMP AND SANDWICH FIBER COMPOSITES FOR DELAMINATION DURING DRILLING OPERATION |
L Venugopal , P Geeta Krishna, T.N. Ravikanth , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 38 |
A MECANUM WHEEL BASED ROBOT PLATFORM FOR WAREHOUSE AUTOMATION |
J. Krishnaraj , K. Sangeetha , M.V. Babu Tanneru, VVS Harnadh Prasad, M. Vishnu Vardhan, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 39 |
COMPARISON OF PERFORMANCE OF CONIC AND RAMP INLET USING CFD |
Alekhya. N , N. Prabhu Kishore, M. Satyanarayana Gupta, Y. Swetha , M Vishnu Vardhan, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 40 |
EXPERIMENTAL ANALYSIS OF CALOPHYLLUM INOPHYLLUM BIODIESEL BLENDS ON VARIABLE COMPRESSION RATIO DIESEL ENGINE |
N. Prabhu Kishore, Alekhya. N , J. Krishnaraj , Bridjesh. P , V.Anil Kumar , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 41 |
DEVELOPMENT AND MECHANICAL CHARACTERISATION OF GLASS FIBRE REINFORCED POLYMER COMPOSITE |
G. Musalaiah , Bade Venkata Suresh, Monica Tanniru, P. Ramakrishna Reddy, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 42 |
FLEXURAL STRENGTH ENHANCEMENT OF GLASS FIBRE REINFORCED POLYMER COMPOSITE |
G. Musalaiah , Y Shireesha , M.V. Babu Tanneru, U Pranavi , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 43 |
A PYTHON TOOL FOR EVALUATION OF SUBJECTIVE ANSWERS (APTESA) |
Dharma Reddy Tetali, Kiran Kumar G, Lakshmi Ramana, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 44 |
DESIGN AND ANALYSIS OF EDDY CURRENT MULTI CALIPER DISC BRAKE |
G.V.R. Seshagiri Rao, G. Naveen Kumar, B. Prashanth , D.V.Ramana Reddy, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 45 |
EXPERIMENTAL INVESTIGATIONS OF TIG AND FRICTION STIR WELDING PROCESS FOR AA7075 |
Surya Prakash, B Prashanth , GVR Seshagirirao , J Anoop , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 46 |
IMPROVED NETWORK LIFETIME IN WIRELESS SENSOR NETWORKS USING ELIPTIC CURVE CRYPTOGRAPHY |
Sheikh Gouse, B. Madhuravani , B. Swapna , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 47 |
DESIGN AND ANALYSIS OF HEAVY TRUCKS USING CFD |
Monica T , B L N Krishna Sai, K Kamalakar , S Girish , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 48 |
HEAT TRANSFER ENHANCEMENT STUDIES OF COPPER OXIDE NANO FLUIDS IN A ROUND PIPE WITH INSERT |
K. Ashok Reddy, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 49 |
VIBRATION ANALYSIS OF LAMINATED COMPOSITE PLATES USING LAYERWISE HIGHER ORDER SHEAR DEFORMATION THEORY |
S. Lokesh , CH. Lakshmi Tulasi, T. Monica , U. Pranavi , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 50 |
MODELLING OF BICYCLE FITTED WITH TWO STROKE PETROL ENGINE |
G. Arun Reddy, S. Navya Sree, Mastan Valli Babu, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 51 |
THERMAL MODELING AND MANUFACTURING OF HEAT SINK FOR COOLING CPU |
M. Prashanth Reddy, C. Labesh kumar, T. Vanaja , VVSH Prasad , K Ashok Reddy, |
Volume 8,Issue 9,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 52 |
DESIGN AND DEVELOPMENT OF ACOUSTIC REFRIGERATION SYSTEM |
G. Ananda Rao, M. V. Babu Tanneru, Khannaji Pattapu, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 53 |
EFFECTS OF DIETHYL ETHER ON PERFORMANCE AND EMISSION CHARACTERISTICS OF A DIESEL ENGINE USING TOROIDAL PROFILE BOWL PISTON BY VARYING INJECTION PRESSURE |
S. Madhu , A.V. Krishna Chaitanya, P. Bridjesh , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 54 |
PERFORMANCE AND EMISSION CHARACTERISTICS OF 4-STROKE DIESEL ENGINE USING USED TRANSFORMER OIL |
B.L.N. Krishna Sai, S. Navya Sree, A.V. Krishna Chaitanya, U Pranavi , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 55 |
QUALITY RESEARCH PUBLICATIONS - A KEY DIFFERENTIATOR IN INDIA RANKINGS 2017 |
K. L Chugh , N. Alekhya , N. Prabhu Kishore, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 56 |
DEVELOPMENT OF ANDRO HUMANOID ROBOT ARM |
U. Suhasini , K. Chinnamaddaiah , Lakshmipathi Yerra, N Santhi Sree, B Dhanraj , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 57 |
DESIGN AND ANALYSIS OF STEERING COMPONENTS FOR A RACE CAR |
P. Bridjesh , Subramanyam B , Madhu S , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 58 |
PROTECTION OF ENCROACHMENT ON BIGDATA ASPEC |
Sirisha N , K.V.D Kiran , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 59 |
SATURATION AND NON-SATURATION THROUGHPUT AND PACKET DELAY ANALYSIS OF IEEE 802.11 DCF FOR AD-HOC NETWORKS |
D Laxma Reddy, K Nishanth Rao, A.V.Paramkusam , K Nehru , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 60 |
EXPERIMENTAL INVESTIGATION ON SPOT WELDING OF MILD, COLD ROLLED STEEL AND GALVANISED IRON SHEETS |
K. Shravan Kumar, T.N Ravikanth , B. Prashanth , CH. Satya Sandeep, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 61 |
FREEZE LINING IN FURNACE A HEAT TRANSFER MODEL USING FINITE DEFERENCE METHOD AND MAT LAB |
Santhi Karyamsetti, G. Ananda Rao, S Girish , Monica.T , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 62 |
A LOW COST, HOME CARE SMART STETHOSCOPE FOR DIAGNOSIS OF RESPIRATORY DISEASES AND HEART RATE MEASUREMENT |
M Monica Subashini, R. Karthik , Sreethul Das, V Vinayak , Mehta Raj Mukesh, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 63 |
A NOVEL THROUGHPUT AND PACKET DELAY ANALYSIS OF CONTROL SCHEME BASED ON A MARKOV CHAIN MODEL IN DENSE IEEE 802.11 WLAN |
N. Vasudheva Reddy, V. Arun , A.V.Paramkusam , N Paparao , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 64 |
IMPROVEMENT OF YAGI UDA ANTENNA RADIATION PATTERN |
D. Naresh Kumar, G. Shravan Kumar, A.V.Paramkusam , M Ramesh Babu, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 65 |
MANUFACTURING OF STEERING COMPONENTS FOR A RACE CAR |
Subramanyam B , P. Bridjesh , Madhu S , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 66 |
A FAST MOTION ESTIMATION ALGORITHM BASED ON HYBRID QUAD TREE STRUCTURE |
G.Shravan Kumar, D.Naresh Kumar, A.V.Paramkusam , D Kalander Basha, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 67 |
ANALYSIS OF PLANAR INVERTED-F ANTENNA USING HFSS |
V.Arun , Md.Abdul Rawoof, A.V.Paramkusam , T Nagarjuna , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 68 |
A FAST SEARCH BLOCK-BASED MOTION ESTIMATION ALGORITHM FOR COMPRESSION OF MOTION PICTURES |
Md. Abdul Rawoof, D.Laxma Reddy, A.V.Paramkusam , R V Krishnaiah , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 69 |
OVERVIEW OF SMART MATERIALS -BUILDING BLOCKS FOR SUSTAINABLE FUTURE |
T.N. Ravi Kanth, K. Shravan Kumar, A.V. Krishna Chaitanya, N. Santhi Sree, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 70 |
AN EFFICIENT MULTILEVEL MOTION ESTIMATION IN VIDEO CODING |
Koppula Srinivas Rao, K Nishanth Rao, A.V.Paramkusam , G Bhavana , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 71 |
IMPLEMENTATION OF AN ADAPTIVE APPROACH FOR BIO MEDICAL APPLICATIONS |
P Ramesh , Chandra Shekhar Jakkena, R Karthik , G Manisha , M. Madhavi , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 72 |
POWER GENERATION SYSTEM USING HANDCRANK AND FITNESS ANALYZER BY USING LABVIEW |
Chandra Shekhar Jakkena, P Ramesh , R Karthik , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 73 |
MODELLING AND STRUCTURAL ANALYSIS OF A GO-KART VEHICLE CHASSIS FRAME |
K. Chinnamaddaiah , Y. Lakshmipathi , P Ravikanth Raju, Subramanyam B , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 74 |
MODELING AND ANALYSIS OF A COMPOSITE WING FOR MISSILE STRUCTURE |
M. Ganesh , G Hima Bindu, A. Sai Kumar, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 75 |
EVALUATION OF JOINT PROPERTIES OF FRICTION STIR WELDED AL/CU BIMETALLIC LAP JOINTS FABRICATED BY THREADED TOOL |
M Satyanarayana Gupta, Parthasarathy Garre, Alekhya N , P Poornima Reddy, Athota Rathan, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 76 |
IMPACT ANALYSIS OF ALUMINIUM WHEEL |
G.V.R. Seshagiri Rao, Akashdeep Gupta, B. Prashanth , D. V. Ramana Reddy, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 77 |
ATM ROBBERY PREVENTION BY USING SENSOR DEVICES |
Kande Archana, P Bhaskara Reddy, Ramesh Jogula, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 78 |
DEVELOPMENT OF AN OPEN TYPE CNC SYSTEM FOR A 3-AXIS MICRO CNC MACHINE |
Lakshmipathi Yerra, K. Chinnamaddaiah , Subramanyam B , P Ravikanth Raju, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 79 |
CONCEPTUAL DESIGN OF FLYING VEHICLE |
B. Subbaratnam , Alka Sawale, Sreekanth Sura, Anitha D , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 80 |
ENVIRONMENTAL STUDY ON GFRP COMPOSITE LAMINATES |
G. Dhanajayan , K Veeranjaneyulu , V.Vamshi , M.Satyanarana Gupta, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 81 |
ANALYSIS OF NANOIRON PARTICLES REINFORCED BLENDED NANOCOMPOSITE |
G. Naveen Kumar, G.V.R. Seshagiri Rao, Y. V. Mohana Reddy, K. Hemachandra Reddy, M. V. Babu , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 82 |
EXPERIMENTAL INVESTIGATION ON SHELL AND TUBE HEAT EXCHANGER USING SEGMENTAL AND DISC-DOUGHNUT TYPE BAFFLES |
V. Sreedhar , G.Ravi Chandra, T.N.Ravi Kanth, A.Somaiah , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 83 |
HOSTING SERVERS IN CLOUD BY USING CURRENT CLOUD COMPUTING PLATFORM AND SERVICES |
Chandrasekhara Reddy T, Y Madan Reddy, Ilaiah Kavati, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 84 |
IP TELEPHONY OVER MULTIPROTOCOL LABEL SWITCHING NETWORK USING IP MULTIMEDIA SUBSYSTEM |
C Devi Supraja, R Gangadhar Reddy, M. Ramesh Babu, P.B. Natarajan , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 85 |
EFFECT OF TOOL PIN PROFILE AND OPTIMIZATION OF PROCESS PARAMETERS ON A6061 BY FRICTION STIR WELDING USING TAGUCHI METHOD |
M. Anuradha , C Sailaja , V. Chittaranjandas , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 86 |
A SURVEY ON APPLICATIONS AND SECURITY ISSUES OF INTERNET OF THINGS (IOT) |
P. Dayaker , Y. Madan Reddy, M Bhargav Kumar, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 87 |
EFFECT OF DIETHYL ETHER (DEE) ON THE PERFORMANCE AND EMISSION CHARACTERISTICS OF A LHR ENGINE USING PAPAYA METHYL ESTER-EUCALYPTUS OIL BLEND |
E. Sivakumar , Isam Rashad T.K, C. Satya Sandeep, M. Vishnu Vardhan, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 88 |
GSM BASED FISH MONITORING SYSTEM USING IOT |
B. Durga Sri, K. Nirosha , P. Priyanka , B. Dhanalaxmi , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 89 |
PERFORMANCE AND EMISSION ANALYSIS OF CI ENGINE FUELLED WITH THE BLENDS OF PALM METHYL ESTERS AND DIESEL |
E.C. Prasad Nidumolu, K. Sandeep Kumar, J. Krishnaraj , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 90 |
MICROSTRUCTURAL STUDIES OF MAGNESIUM ZE41 RARE EARTH ALLOY USING SEM |
C Sailaja , N Anuradha , P Geeta Krishna, B Ramgopal Reddy, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 91 |
TO DIALOGUE WITH CHATBOT USING MACHINE LEARNING |
Y Madan Reddy, Chandrasekhara Reddy T, P Dayaker , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 92 |
A CASE STUDY ON DESIGN OF MECHANICAL PLOUGHING CYCLE |
A. Nalini Deepthi, T.N. Ravikanth , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 93 |
ROTOR SIDE CONTROL OF WIND TURBINE DRIVEN OPEN END (ROTOR) WINDING INDUCTION GENERATOR |
Swati Devabhaktuni, Pramod Kumar Vujjini, Nishath Quadri, T.Kalyani , P.Sridhar , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 94 |
FINITE ELEMENT MODELING AND ANALYSIS OF HIP JOINT PROSTHESIS WITH MODULAR STEM |
Taj , E C Prasad Nidumolu, P Geeta Krishna, B Prashanth Kumar, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 95 |
CFD ANALYSIS OF PULSATING HEAT PIPE USING DIFFERENT FLUIDS |
S Girish , K Lavanya , P Geeta Krishna, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 96 |
AN AUTOMATED MECHANISM FOR SMART PACKAGING LINE MANAGEMENT |
K. Sai Prasad, G. Prabhakar Reddy, N Chandra Sekhar Reddy, K. Sai Teja, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 97 |
THERMODYNAMIC PROPERTY FUNCTIONS OF NH3-H2O MIXTURE |
K. Deepak , M. Ashok Kumar, V. Mahidhar Reddy, B. Subramanyam , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 98 |
FABRICATION AND ANALYSIS OF MECHANICAL PROPERTIES OF FRP COMPOSITES |
M.Ananda Rao, K. Vijaya Kumar Reddy, T.Seshaiah , |
Volume 5,Issue 8,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 99 |
EXPERIMENTAL INVESTIGATION OF TENSILE STRENGTH ON AL 6351 TO THE AEROSPACE STRUCTURAL APPLICATIONS |
K. Vijay Kumar, M. Nikhil Reddy, M.V. Niranjan Reddy, PARTHASARATHY GARRE, |
Volume 5,Issue 2,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 100 |
BRANCH HEIGHT OPTIMIZATION OF COPPER TUBE HYDROFORMING USING SIMULATION THROUGH TAGUCHI TECHNIQUE |
Parthasarathy Garre, |
Volume 4,Issue 5,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 101 |
EXPERIMENTAL INVESTIGATIONS ON VARIABLE COMPRESSION RATIO DIESEL ENGINE FUELLED WITH MAHUA OIL AND DIESEL BLENDS |
A.V. Krishna Chaitanya, S.Girish , T. Monica , |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
| 102 |
PERFORMANCE COMPARISON OF GFRP COMPOSITE I SECTION WITH AN ALUMINUM I SECTION |
Alekhya N , N Prabhu Kishore, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
| 103 |
EVALUATION OF ELECTRO-MECHANICAL PROPERTIES OF FRICTION STIR WELDED AL / CU BIMETALLIC LAP JOINTS |
M. Satya Narayana Gupta, K. Shiva Shankar, |
Volume 8,Issue 4,Year 2017 |
International Journal of Civil Engineering and Technology |
| 104 |
OPTIMIZATION OF SURFACE ROUGHNESS OF TI-6AL-4V TITANIUM ALLOY USING TAGUCHI TECHNIQUE |
B. Prashanth , J. Krishnaraj , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 105 |
HYBRIDSEG FRAMEWORK AND ITS APPLICATION TO NAMED ENTITY RECOGNITION |
K Pushpa Rani, M Jhansi , Chandrasekhara Reddy T, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 106 |
SENTIMENT TRENDS ON NATURAL DISASTERS USING LOCATION BASED TWITTER OPINION MINING |
Myneni Madhu Bala, M. Srinivasa Rao, M Ramesh Babu, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 107 |
DEVELOPMENT OF BIO MASS GASIFICATION FOR THERMAL APPLICATIONS |
G. Ananda Rao, M. Vidhisha , M. Sudhakar Chowdary, |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 108 |
EVALUATION OF PLY ORIENTATION ON FAILURE OF KEVLAR 149 EPOXY |
N Madhavi , B Niharika , M Satyanarayana Gupta, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 109 |
EVALUATION OF PLY ORIENTATION ON FAILURE OF COMPOSITES |
N Madhavi , K Sreelakshmi , M. Satyanarayana Gupta, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 110 |
AN EFFICIENT ALGORITHM FOR IMAGE COMPRESSION |
G. Shravan Kumar, D. Naresh Kumar, A.V.Paramkusam , M Hima Bindu, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 111 |
A REVIEW ON SUB ZERO HEAT TREATMENT FOR D2 STEELS |
Taj , A. Nalini Deepthi, B. Prasanth Kumar, S. Navya Sree, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 112 |
A COMPREHENSIVE STUDY ON VARIOUS WELDING TECHNIQUES USED FOR CRYOGENIC VESSELS |
J. Krishnaraj , B. Prashanth , |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 113 |
TEXT MINING ON REAL TIME TWITTER DATA FOR DISASTER RESPONSE |
Myneni Madhu Bala, K. Navya , P. Shruthilaya , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 114 |
MODELING, ANALYSIS AND FABRICATION OF A PISTON ENGINE CRANK SHAFT |
M. Ganesh , A. Sai Kumar, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 115 |
ENHANCEMENT OF MATERIAL PROPERTIES BY REINFORCEMENT OF NATURAL FIBERS INTO GLASS FIBER |
J. Sreekanth Reddy, J. Gangadhar , P. Kezia , |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 116 |
A SMART CONNECTED LIGHT BULB |
D Sarita Rani, T. Ravinder , DVS Chandrababu , K Narsimha , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 117 |
SEPERATION OF MUSIC AND VOICE BASED ON REPEATING PATTERN |
T Pardhu , Jyothi Kalyan, R Karthik , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 118 |
DESIGN AND ANALYSIS OF TWO DIFFERENT MODIFIED TRUCKS USING CFD |
L. Praveen , L. Venugopal , Monica T , C Labesh Kumar, K Raja Sekar Reddy, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 119 |
FABRICATION OF PNEUMATIC PICK AND PLACE ROBOT |
P. Kamal Kumar, Taj , L. Praveen , Anoop Joshi, G. Musalaiah , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 120 |
AUTOMATED TOOL FOR BLOOM`S TAXONOMY |
Dharma Reddy, K. I. Chugh , Rubiya Subair, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 121 |
EVALUATION OF JOINT PROPERTIES OF FRICTION STIR WELDED AL/CU BIMETALLIC LAP JOINTS |
K. Sandeep Kumar, G. Chandra Mohana Reddy, Y. Laxmipathi , J Krishna Raj, S. Naresh Kumar, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 122 |
PERFORMANCE AND EMISSION CHARACTERISTICS OF VARIABLE COMPRESSION RATIO DIESEL ENGINE FUELLED WITH WASTE PLASTIC OIL AND DIMETHYL CARBONATE |
S. Navya Sree, A.V. Krishna Chaitanya, B.L.N. Krishna Sai, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 123 |
A CASE STUDY ON SECURED EMBEDDED VOTING SYSTEM USING BIOMETRIC |
M Srinivasa Rao, A. Venkata Siva Rao, P Venkata Hemanth, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 124 |
A NOVEL APPROACH FOR EVENT MANAGER AND PLANNER |
Y. Madan Reddy, P. Dayaker , Chandrasekhara Reddy T, A Bhanu Prasad, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 125 |
DEVELOPMENT OF A BIO SHOE SYSTEM WITH IOT FOR BIO-MEDICAL APPLICATIONS |
H Bharathi , B Annapurna , T S Arulananth , R Karthik , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 126 |
MINI CNC 2D SKETCHER FOR ACCURATE BUILDING DRAWING |
M. Anil Kumar, J. Krishnaraj , R. Bhanu Gowtham Sai Reddy, |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 127 |
ANALYSIS OF A CONDENSER IN A THERMAL POWER PLANT FOR POSSIBLE AUGMENTATION IN ITS HEAT TRANSFER PERFORMANCE |
S Girish , M Surya Prakash, P Geeta Krishna, K Lavanya , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 128 |
EXPERIMENTAL ANALYSIS OF FRICTION STIR WELDING ON DISSIMILAR AL AND BRASS ALLOYS |
Sailaja C , N. Anuradha , B Ramgopal Reddy, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 129 |
MATHEMATICAL ANALYSIS AND SIMULATION OF DISTRIBUTED OPTIMAL RELAY SELECTION IN WIRELESS MULTI-HOP COOPERATIVE SENSOR NETWORKS |
Koppula Srinivas Rao, R Karthik , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 130 |
SMART TRAFFIC CONTROL SYSTEM USING ZIGBEE/RFID NETWORKS |
P. Dayaker , P Honey Diana, Y. Madan Reddy, |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 131 |
DESIGN OF CONCENTRATED PARABOLIC DISH COLLECTOR FOR VAPOUR ABSORPTION REFRIGERATION SYSTEM |
G. Chandra Mohana Reddy, G. Ananda Rao, V.V.S. Harnadh Prasad, M. Vishnu Vardhan, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 132 |
GLOBAL LAND TEMPERATURE ANALYSIS USING HADOOP USER EXPERIENCE (Hue) |
M Jhansi , K Pushpa Rani, Chandrasekhara Reddy T, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 133 |
BEST PRACTICES TO IMPROVE AND ENHANCE TECHNICAL SKILLS FOR THE ENGINEERING GRADUATES BY ACADEMIA AND INDUSTRY ASSOCIATION |
Chandrasekhara Reddy T, P. Dayaker , P Bhaskara Reddy, |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 134 |
INFLUENCE OF VEGETABLE OIL BASED CUTTING FLUIDS ON TOOL WEAR AND SURFACE ROUGHNESS IN MILLING EN8 STEEL USING HSS AND TUNGSTEN CARBIDE TOOL |
M.V. Babu Tanneru, J. Krishnaraj , K. Vijaya Krishna Varma, |
Volume 8,Issue 6,Year 2017 |
International Journal of Civil Engineering and Technology |
| 135 |
USER FRIENDLY AADHAR BASED ELECTRONIC VOTING MACHINE USING ARM7 |
V Syam Babu, A L Siridhara , R Karthik , Koppula Srinivas Rao, G Bhavana , K H Murali , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 136 |
EXPERIMENTAL ANALYSIS ON FORMABILITY OF ASS304 SHEET METAL AT VARYING PARAMETERS |
P. Raghavendra , P. Kezia , J. Gangadhar , S. M. Gangadhar Reddy, D. Govardhan , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 137 |
SHADOW DETECTION AND REMOVAL IN AERIAL IMAGES USING GAUSSIAN MIXTUREBASED BACKGROUND AND FOREGROUND SEGMENTATION ALGORITHM |
T S Arulananth , P Bhaskara Reddy, H Bharathi , K Nehru , K H Murali , |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 138 |
SHREWD STREET DIVIDERS DRIVEN BY IOT TECHNOLOGY |
Venkata Siva Rao. A, M. Srinivasa Rao, K. Pushpa Rani, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 139 |
SENSOR BASED DISPLAY CONTROL IN PORTABLE COMMUNICATION DEVICES |
M. Vinay Kumar Reddy, Sabitha C.H , P. Padma , O. Rmaesh , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 140 |
SECURITY FOR WIRELESS LOCAL AREA NETWORK WITH PRE SHARE KEY AUTHENTICATION USING WI-FI PROTECTED ACCESS |
Paparao Nalajala, R. V. Krishnaiah , B Annapurna , Bhavana Godavarthi, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 141 |
A CRITICAL REVIEW OF COMPOSITE MATERIALS FOR BUILDINGS, THERMAL, AEROSPACE AND CRYOGENIC APPLICATIONS |
Kanna Ashok Reddy, K. Sandeep Kumar, K. Raja Sekhar Reddy, V.V.S. Harnadh Prasad, G. Arun Reddy, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 142 |
COMPARATIVE ANALYSIS ON SORTING AND SEARCHING ALGORITHMS |
B Subbarayudu , L Lalitha Gayatri, P Sai Nidhi, P. Ramesh , R Gangadhar Reddy, Kishor Kumar Reddy C, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 143 |
INTERNET OF THINGS (IOT) DEVICE ENABLED USER PROGRAMMABLE ACOUSTIC SENSITIVE ACTIVATING OCCURRENCE IN CLOUD ENVIRONMENTS |
N.Hanuman Reddy, K. L. Raghavender Reddy, T. Nirmala , A. Gayatri , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 144 |
ANALYSIS OF INTERLAMINAR STRESSES IN A COMPOSITE MATERIAL WITH A CIRCULAR HOLE BY USING FINITE ELEMENT METHOD |
K Sreelakshmi , N Madhavi , M Satyanarayana Gupta, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 145 |
ENHANCED QUERY EXPANSION FOR WEB INFORMATION RETRIEVAL |
Ramesh Shahabadkar, Y. Vijaya Bhaskar Reddy, BSS. Murali Krishna, T. Durga Devi, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 146 |
FRAMEWORK FOR EFFICIENT AUTHENTICATION MECHANISM FOR GENUINE USER`S PAYLOAD TRANSMISSION IN CYBERNETIC LOCATIONS |
S. Sai Satyanarayana Reddy, S. Nagarjuna Reddy, N. Subba Reddy, M.Srinivasa Rao, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 147 |
DRONE CONTROL VEHICLE FOR PROSPECTIVE PROTECTED SHIPPING |
S. Sai Satyanarayana Reddy, G.S. Prasada Reddy, B.Balakirshna , N. Sirisha , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 148 |
DRAG REDUCTION OVER A CIRCULAR CYLINDER |
Eppakayala Naresh, Pinnamaneni Dileep kumar, Anil kumar.N, B. Nagaraj goud, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 149 |
SOLS TECHNIQUE BASED ENCODER FOR DEDICATED SHORT RANGE COMMUNICATION IN INTELLIGENT TRANSPORTATION SYSTEM APPLICATIONS |
C Devi Supraja, R Gangadhar Reddy, T.Kalyani , M. Ramesh Babu, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 150 |
E-BAZAAR INNOVATION USING IOT DEVICE IN CLOUD SUBSCRIPTION MANAGEMENT |
V. Uma Maheswari, S. Shoba Rani, D. Divakara Reddy, B. Lakshmi , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 151 |
DAMAGE ANALYSIS OF LOW SPEED IMPACT ON COMPOSITE MATERIALS |
K Veeranjaneyulu , M S N Gupta , Dhana Jayan, Vamsi V , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 152 |
LOW POWER DESIGN OF WALLANCE TREE MULTIPLIER |
B.K.V.Prasad , P.Satish Kumar, B. Stephen Charles, T. Prasad , |
Volume 3,Issue 3,Year 2012 |
International Journal of Electronics and Communication Engineering and Technology |
| 153 |
EXTERNALLY MEASURED REACH ABILITY IN CYBERNETIC REMOTE SYSTEM |
M. A. Ranjit Kumar, M. Pravarsha Reddy, P. Padma , M. Benjimen Watson, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 154 |
DESIGN AND ANALYSIS OF HUMPBACK WHALE WING WITH WINGLETS |
B Niharika , V Saibasha , N Madhavi , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 155 |
LOCATION PREDICTION OF ANONYMOUS TEXT USING AUTHOR PROFILING TECHNIQUE |
Raghunadha Reddy T, Merugu. Gopichand , Hemanath K , |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
| 156 |
APPLICATION OF CNC MILLING IN MANUFACTURING TURBINE BLADES |
A. Sai Kumar, M. Ganesh , G Hima Bindu, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 157 |
FACILITATING EFFECTIVE USER NAVIGATION THROUGH WEBSITE STRUCTURE IMPROVEMENT |
Suraj Rajaram Nalawade, Poreddy Dayaker, |
Volume 5,Issue 7,Year 2014 |
International Journal of Computer Engineering and Technology |
| 158 |
PRIVACY-PRESERVING PUBLIC AUDITING FOR SECURE CLOUD STORAGE |
Navanath Jadhav, L.Laxmi , |
Volume 5,Issue 7,Year 2014 |
International Journal of Computer Engineering and Technology |
| 159 |
METHODOLOGY FOR SELF ASSESSMENT IN THE CONTEXT OF NATIONAL RANKINGS OF ENGINEERING INSTITUTIONS IN INDIA |
K. L Chugh , P Ram Mohan Rao, R. Karthik , N Prabhu Kishore, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 160 |
COMPARATIVE STUDY OF CFD SOLVERS FOR TURBULENT FUEL FLOW ANALYSIS TO IDENTIFY FLOW NATURE |
K. Shiva Shankar, M. Satya Narayana Gupta, G. Parthasarathy , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 161 |
INVESTIGATION OF STRUCTURAL STRENGTH ON SANDWICH PANEL OF FIBER REINFORCED COMPOSITE |
Parthasarathy Garre, M Satyanarayana Gupta, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 162 |
DESIGN AND ANALYSIS OF WINGLET |
Alka Sawale, MD Khaleel , S. Jaswanth , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 163 |
LEAN MANUFACTURING IN FOOD AND BEVERAGE INDUSTRY |
P. Kezia , K. Shravan Kumar, B L N Krishna Sai, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 164 |
IMPROVING THE PERFORMANCE OF 21ST CENTURY LEARNER BY PLANNING SESSION PLANNER-A CASE STUDY |
N Prabhu Kishore, Alekhya N , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 165 |
MODELING AND CFD ANALYSIS ON ONE STAGE OF TURBINE OF GAS TURBINE ENGINE |
MD Khaleel , Marampalli Shilpa, L.Farooq , |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 166 |
AN EFFICIENT ANTI PHISHING FRAMEWORK BASED ON DYNAMIC CAPTCHA |
N Chandra Sekhar Reddy, Purna Chandra Rao, A. Govardhan , |
Volume 7,Issue 6,Year 2016 |
International Journal of Computer Engineering and Technology |
| 167 |
EFFICIENT SECURITY AND PRIVACY IN DECENTRALIZED AUTHORITY USING ATTRIBUTE- BASED ENCRYPTION |
Koppula Srinivas Rao, |
Volume 7,Issue 6,Year 2016 |
International Journal of Computer Engineering and Technology |
| 168 |
Design and Manufacture of Aircraft Saddle Fixture for Vertical Stabilizer Assembly Tooling - A Review |
M. Venkata Niranjan Reddy, Soma Avinash, Sai Kumar Sura, Parthasarathy Garre, |
Volume 2,Issue 5,Year 2014 |
International Journal of Engineering and Technology Research |
| 169 |
EVALUATION OF PLY ORIENTATION ON FAILURE OF KEVLAR 149 EPOXYS |
N Madhavi , B Niharika , M Satyanarayana Gupta, |
Volume 8,Issue 5,Year 2017 |
International Journal of Civil Engineering and Technology |
| 170 |
ANALYSING THE METALLIC FOAM-FILLED TRIPLE TUBE CONCENTRIC HEAT TRANSFER |
A. Nalini Deepthi, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 171 |
IDENTIFYING BRAIN TUMOUR FROM MRI IMAGE USING MODIFIED FCM AND SUPPORT VECTOR MACHINE |
B.VENKATESWARA REDDY, P.Satish Kumar, P.BHASKAR REDDY, B.NARESH KUMAR REDDY, |
Volume 4,Issue 1,Year 2013 |
International Journal of Computer Engineering and Technology |
| 172 |
Ventilator Fan in the Kitchen to Produce Power for Home Appliances |
Praveena Bavisetti, |
Volume 3,Issue 4,Year 2015 |
International Journal of Research in Mechanical Engineering |
| 173 |
Design and Manufacture of Aircraft Saddle Fixture for Vertical Stabilizer Assembly Tooling - A Reviews |
M. Venkata Niranjan Reddy, Soma Avinash, Sai Kumar Sura, Parthasarathy Garre, |
Volume 2,Issue 5,Year 2014 |
International Journal of Research in Mechanical Engineering |
| 174 |
The Study of Closedness and Self-similarity of 3D Fractals |
Bulusu Rama, S.K. Khaja Shareef, T. Nirmala , J. Thirupathi , |
Volume 12,Issue 14,Year 2019 |
Indian Journal of Science and Technology |
| 175 |
Fast palmprint retrieval using speed up robust features |
G Kiran Kumar, D Malathi Rani, E Guru Mohan Rao, |
Volume 13,Issue 31,Year 2020 |
Indian Journal of Science and Technology |
| 176 |
A Comparative Study of Maintainability versus Availability Index of Open Source Software |
Varun K L. Srivastava, N. Chandra Sekhar Reddy, Anubha Shrivastava, |
Volume 12,Issue 12,Year 2019 |
Indian Journal of Science and Technology |
| 177 |
COMPUTATIONAL SOLUTION OF SINGULARLY PERTURBED TWO-POINT BOUNDARY VALUE PROBLEMS USING DERIVATIVE QUADRATURE METHOD |
K. Sharath Babu, G. Gangadhar , N. Amaranth , V. Nagaraju , |
Volume 1,Issue 7,Year 2016 |
Global Research and Development Journal for Engineering |
| 178 |
Conventional vs. junctionless gate-stack DG-MOSFET based CMOS inverter |
Shubham Tayal, Pachimatla Samrat, Vadula Keerthi, Biswajit Jena, Karthik Rajendra, |
Volume 12,Issue 2,Year 2021 |
International Journal of Nano Dimension |
| 179 |
IMPLEMENTATION OF HOME AUTOMATION WITH RASPBERRY PIE AS POSC APPROACH WITH IOT |
K. Anilkumar , Chandrashaker Pittala, |
Volume 5,Issue 7,Year 2018 |
Global Journal of Engineering Science and Researches |
| 180 |
ANALYSIS OF IMPACT OF A DROPLET ON TO MOVING LIQUIDS |
Y. SAROJA , V. VENKATA PHANI BABU, VAKA MURALI MOHAN, |
Volume 9,Issue 4,Year 2020 |
International Journal for Innovative Engineering and Management Research |
| 181 |
Conversation Engine for Deaf and Dumb |
Para Upendar, A. Sangeetha , P. Ravindra , |
Volume 10,Issue 9,Year 2021 |
International Journal for Innovative Engineering and Management Research |
