| 1 |
VWDRE - A VISION-BASED APPROACH FOR MINING DATA FROM SEARCH ENGINE RESULT PAGES |
M. Sathya , S. Madhan , U. Jothilakshmi , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 2 |
AN EFFICIENT SELFISHNESS CONTROL MECHANISM FOR MOBILE AD HOC NETWORKS |
D. Rajalakshmi , K. Meena , |
Volume 11,Issue 7,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 3 |
INCREASE OF PRODUCTIVITY IN ASSEMBLY AND MACHINING LINES OF CLUTCH SERVO ASSEMBLY LINE |
S. Karthik , |
Volume 11,Issue 5,Year 2020 |
International Journal of Management |
| 4 |
DESIGN OF WIND SOLAR AND PUMPEDSTORAGE HYBRID POWER SUPPLY SYSTEM |
S.Sivakumar , K. Siddappa Naidu, |
Volume 8,Issue 4,Year 2017 |
International Journal of Electrical Engineering and Technology |
| 5 |
PERFORMANCE EVALUATION OF HYBRID FRC USING ADAPTIVE NEURO-FUZZY TECHNIQUE |
S. Syed Ibrahim, S. Kandasamy , S. Pradeepkumar , |
Volume 11,Issue 2,Year 2020 |
International Journal of Civil Engineering and Technology |
| 6 |
EXPERIMENTAL STUDY ON THE BEHAVIOUR OF GEOPOLYMER BRICKS |
Pavithra N , Divya G , Suganthi M , Omprakash S , |
Volume 9,Issue 2,Year 2018 |
International Journal of Civil Engineering and Technology |
| 7 |
PNEUMATIC RAINWATER HARVESTER (PRH) |
Saravanan J , Balaji C , M. Jayadurgalakshmi , |
Volume 9,Issue 2,Year 2018 |
International Journal of Civil Engineering and Technology |
| 8 |
AN EXPERIMENTAL INVESTIGATION ON CONCRETE BY PARTIAL REPLACEMENT OF COPPER SLAG WITH FINE AGGREGATE AND CERAMIC WASTE WITH COARSE AGGREGATE |
Karthickraja R , Vignesh J , |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
| 9 |
A STUDY ON FARMERS PERCEPTION TOWARDS AGRICULTURAL LOANS IN RURAL AREAS WITH REFERENCE TO RAYALASEEMA REGION, ANDHRA PRADESH |
K. Sarada Siva Reddy, K. Ravishankar , |
Volume 11,Issue 3,Year 2020 |
International Journal of Management |
| 10 |
FLEXURAL BEHAVIOUR OF COLD FORM STEEL SECTIONS SUBJECTED TO STATIC LOADING |
Sivaranjani. S , Nalini.S , Annapurani.M , |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
| 11 |
A DETAILED STUDY ON PARTIAL REPLACEMENT OF FINE AGGREGATE WITH BRICK DEBRIS |
R. Veerakumar , R. Saravanakumar , |
Volume 9,Issue 3,Year 2018 |
International Journal of Civil Engineering and Technology |
| 12 |
INVESTIGATIONAL STUDY ON FRESH WATER IMPROVEMENT IN CONVENTIONAL SOLAR STILL WITH PV SUBMERGED IN NANOFLUID |
Madhu Balasubramanian, Balasubramanian Esakki, |
Volume 10,Issue 2,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 13 |
ENHANCEMENT OF PERFORMANCE PARAMETER OF CLOUD USING DYNAMIC DEGREE BALANCED WITH MEMBERSHIP VALUE ALGORITHM |
Aparna Joshi, Shyamala Devi Munisamy, |
Volume 11,Issue 08,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 14 |
OPTIMIZATION OF IN-HOUSE POWER CONSUMPTION BY REDUCING PRIMARY AIR PRESSURE IN SUPER CRITICAL COAL FIRED THERMAL POWER PLANT |
Koushik Anandan, Vinoth Krishna, Chandrasekar P , |
Volume 10,Issue 2,Year 2019 |
International Journal of Mechanical Engineering and Technology |
| 15 |
COMPARATIVE STUDY ON COMPRESSIVE STRENGTH OF GEO POLYMER CONCRETE AND ORDINARY PORTLAND CEMENT CONCRETE |
R M Saravana Kumar, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
| 16 |
INNOVATIVE STUDIES ON THE POTENTIAL USE OF POND ASH ON LARGE SCALE IN BUILDING & CONSTRUCTION SECTORS |
S.Baskar , M.Murali Krishna, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
| 17 |
MODULAR OUTDOOR AIR POLLUTION CONTROLLER (MOAPC) |
M.Chinnasamy , Saravanan J , |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
| 18 |
DESIGN AND EXECUTION CENTRED FPGA FOR MLI BY USING DECOUPLED DOUBLE SYNCHRONOUS REFERENCE FRAME IN A SHUNT ACTIVE FILTER WITH STATE DELAY CONTROLLER TECHNIQUE |
Vinoth K , Chandrasekar P , |
Volume 11,Issue 9,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 19 |
A STUDY ON TRANSFORMATION OF SUPPLY CHAIN MANAGEMENT FROM ANCIENT TO AUTOMATION AND THEIR PROBLEMS & PROSPECTS - AN INDIAN PROSPECTIVE |
Khaja Khan Pathan, K. Ravishankar , |
Volume 11,Issue 9,Year 2020 |
International Journal of Management |
| 20 |
A STUDY ON FARMERS AWARENESS ON AGRICULTURE LOANS IN RURAL AREAS WITH REFERENCE TO RAYALASEEMA REGION, ANDHRA PRADESH |
K. Sarada Siva Reddy, K Ravishankar , |
Volume 11,Issue 11,Year 2020 |
International Journal of Management |
| 21 |
IDENTIFICATION OF THE PREDOMINANT PREDICTORS OF ENTREPRENEURIAL INTENTION USING STATISTICAL METHOD ON AJZEN`S THEORY OF PLANNED BEHAVIOR MODEL |
Kotteswaran. D , R. Seranmadevi , |
Volume 11,Issue 11,Year 2020 |
International Journal of Management |
| 22 |
OUTAGE ANALYSIS IN ADHOC NETWORKS DURING MULTIPATH MULTICAST INFORMATION USING MMAODV ALGORITHM |
Kanmani Ruby. E. D, A. Selwin Mich Priyadharson, Janani. P , B. Sathyasri , |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 23 |
FUZZY BASED OPTIMIZATION OF LEAKAGE DETECTION IN PETROLEUM PIPELINES |
A. Selwin Mich Priyadharson, Kanmani Ruby. E. D, V. Mahalakshmi , B. Sathyasri , |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 24 |
REMOVAL OF NICKEL FROM WATER BY ADSORPTION METHOD USING CLAM SHELLS |
S.Baskar , K.R. Aswin Sidhaarth, |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 25 |
FORCE SENSOR BASED STRATEGY ANALYSIS OF FOOT ULCERATION FOR DIABETIC NEUROPATHY PATIENTS |
T. Sudha , S. Kuzhaloli , R. Yuvaraj , Nandini N , V. Nagaveni , P. Vijayakumar , |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 26 |
A CRITICAL VIEW OF RECRUITERS ON CRT PROGRAMMES WITH REFERENCE TO MANAGEMENT COLLEGES |
Kandati Sai Chandu, K Ravishankar , |
Volume 11,Issue 10,Year 2020 |
International Journal of Management |
| 27 |
A COMPARATIVE ANALYSIS OF FUZZY LOGIC AND GENETIC ALGORITHM CONTROL FOR DTC BASED PMSM |
N Herald Anantha Rufus, R Senthil Rama, |
Volume 11,Issue 10,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 28 |
ANALYSIS AND OPTIMIZATION OF MACHINING PARAMETERS IN THROUGH FEED CENTERLESS GRINDING OF HIGH CARBON STEEL |
S Dinesh , T Rajkumar , S Muthukumarasamy , G Sathish Kumar, S V Kajendirakumar , B Suresh Kumar, |
Volume 9,Issue 13,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 29 |
DESIGN AND SIMULATION OF HYBRID ELECTRIC TRICYCLE EMPLOYING BLDC DRIVE USING POWER BOOST CONVERTER |
S. Swapna , K. Siddappa Naidu, |
Volume 9,Issue 11,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 30 |
DEVICE DRIVER DEVELOPMENT OF HOME AUTOMATION USING RASPBERRY PI 4 |
Priyadharshini S , S. Natarajan , S. Kavitha , |
Volume 12,Issue 2,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 31 |
BIRD STRIKE ANALYSIS ON AIRCRAFT WINDSHIELD |
T. Niruban Projoth, R. Rohith Renish, Sivarathinabala , Vinu Lakshmi, |
Volume 9,Issue 9,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 32 |
CHARACTERIZATION OF PLASTICS GEAR FOR HEAVY DUTY APPLICATIONS |
K Mani Kandan, Jishuchandran , A Devaraj , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 33 |
DESIGN FABRICATION OF EDF- AFTERBURNER TEST RIG |
G Kannan , R Kousik Kumaar, |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 34 |
EXPERIMENTAL INVESTIGATIONS OF NYLON 6 POLYMER MATRIX COMPOSITES MATERIAL FOR WEAR REDUCTION IN GEARS |
Boopathy G , Kannan G , Ramanan N , |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 35 |
CHARACTERIZATION OF POLYMER MATRIX COMPOSITE FOR FOOTREST IN AUTOMOTIVE BRAKE PEDAL |
Jishu Chandran, S Prabu , K Manikandan , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 36 |
EXPERIMENTAL INVISTIGATION ON DI DIESEL ENGINE FUELED WITH DATURA SEED BIODIESEL |
B Siddeswara Rao, M Amala Justus Selvam, |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 37 |
EXPERIMENTAL INVESTIGATION ON FORMABILITY ANALYSIS, MECHANICAL AND CORROSION BEHAVIOUR OF AA1100 SHEET METAL |
K.Logesh , V.K.Bupesh Raja, Rubeshkhannaa Sivakumar, R. Krithick Vignesh, Nishant Kumar Nath, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 38 |
EXPERIMENTAL INVESTIGATION OF HYBRID POLYMER MATRIX COMPOSITE FOR FREE VIBRATION TEST |
K Karthik , R. Ganesh , T. Ramesh , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 39 |
ROLE OF HUMAN INTELLIGENCE AND INFORMATION TECHNOLOGY IN RETAINING INTELLECTUAL CAPITAL |
K.Kumar , |
Volume 4,Issue 2,Year 2013 |
International Journal of Information Technology and Management Information Systems |
| 40 |
VIBRATION ANALYSIS OF COATED SPUR GEARS |
M. Karthik , M. Sundarraj , T. Raja , |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 41 |
FAILURE ANALYSIS OF NATRUAL FIBRE REINFORCED POLIMER COMPOSITE LEAF SPRING |
T. Raja , P.Anand , M. Sundarraj , M. Karthik , A.Kannappan , |
Volume 9,Issue 2,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 42 |
EFFECT OF SURFACE MODIFICATION AND HYBRIDIZATION OF COIR FIBER ON MECHANICAL PROPERTIES OF NYLON/EPOXY HYBRID COMPOSITES |
M.Venkatasudhahar , R.Velu , K. Logesh , R. Ganesh , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 43 |
DESIGN AND ANALYSIS IN MECHANISM OF CAST TILTING MACHINE |
V.Balaji , P. Sathyaseelan , P. Sankarganesh , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 44 |
PREPARATION AND PROPERTIES OF PHENOL-FORMALDEHYDE RESIN REINFORCED WITH RECYCLED CELLULOSE FIBER |
N. Pugazhenthi , J. Thamilarasan , A. Sathesh Kumar, |
Volume 8,Issue 5,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 45 |
VOICE CONTROLLED CAR USING ANDROID, ARDUINO & BLUETOOTH |
M. Santhakumar , S. Saran , S. Sathish Kumar, M. Gunaseelan , K. Elango , |
Volume 12,Issue 3,Year 2021 |
International Journal of Electrical Engineering and Technology |
| 46 |
PRODUCTION OF ALTERNATIVE FUEL USING GASIFICATION BY SYNTHESIS OF FISCHERTROPSCH PROCESS |
S. Sathish Kumar, S. Kannan , J. Joshua , P. Amirthalingam , |
Volume 8,Issue 1,Year 2017 |
International Journal of Advanced Research in Engineering and Technology |
| 47 |
SURVEY ON DATA MINING |
K. Vanishree , K.Jayanthi , |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 48 |
EXPERIMENTAL INVESTIGATION AND ANALYSIS OF TENSILE AND FORMING BEHAVIOUR OF COLD ROLLED SHEET METAL |
K. Logesh , V. K. Bupesh Raja, D. Gokula Krishnan, Md Azeemudeen M, A. Nikhil Andrew, K.S. Hariprasath , |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 49 |
A SIMPLE SCHEME OF TWO STAGE PHOTO VOLTAIC SYSTEM USING FUZZY LOGIC BASED VOLTAGE CONTROL TECHNIQUE |
S. Suchithra , S.R Akshaya , |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 50 |
LOAD RESPONSES BASED OPTIMIZED CASCADED PID CONTROL SCHEME USING PLC-HMI IN HYDRO ELECTRIC PUMPED STORAGE POWER PLANT |
A. Selwin Mich Priyadharson, S. Priya , |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 51 |
SPEED RESPONSE OF BRUSHLESS DC MOTOR USING FUZZY TUNED PID BASED CONTROLLER UNDER DIFFERENT LOAD CONDITION |
S. Swapna , Joseph Henry, K. Siddappa Naidu, |
Volume 8,Issue 11,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 52 |
MOTIF FINDING TOOL USING PERL CGI |
Arundhati Mahesh, G Dicky John Davis, PK Ragunath , E Kannan , |
Volume 9,Issue 4,Year 2018 |
International Journal of Advanced Research in Engineering and Technology |
| 53 |
NUMERICAL MODELING OF JET FUEL SPRAY AND EVAPORATION IN ANNULAR COMBUSTION CHAMBER |
Raja Marudhappan, U Chandrasekhar , K Hemachandra Reddy, |
Volume 9,Issue 4,Year 2018 |
International Journal of Advanced Research in Engineering and Technology |
| 54 |
NO REACTION FLOW ANALYSIS OF AERODERIVATIVE ANNULAR COMBUSTOR OF A TURBO-SHAFT ENGINE |
Raja Marudhappan, U Chandrasekhar , K. Hema Chandra Reddy, |
Volume 9,Issue 4,Year 2018 |
International Journal of Advanced Research in Engineering and Technology |
| 55 |
DEVELOPMENT OF MARINE DERIVED PROBIOTIC BACTERIAL CONSORTIUM FOR THE SUSTAINABLE MANAGEMENT OF LITOPENAEUS VANNAMEI CULTURE |
R Karthik , Angelin C Pushpam, M. C. Vanitha , D. Yuvaraj , |
Volume 6,Issue 10,Year 2015 |
International Journal of Advanced Research in Engineering and Technology |
| 56 |
GPS AND PLC - HMI BASED LAVATORY FLUSH CONTROL IN INDIAN RAILWAY COMPARTMENTS |
A. Selwin Mich Priyadharson, |
Volume 4,Issue 5,Year 2013 |
International Journal of Electrical Engineering and Technology |
| 57 |
EXPERIMENTAL INVESTIGATION AND FINITE ELEMENT SIMULATION OF TENSILE BEHAVIOUR OF AA5052/GF/AA5052 FIBRE METAL LAMINATE (FML) |
K.Logesh , V.K.Bupesh Raja, B.Dinesh , M.Rajesh Kumar, S.Bharath , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 58 |
A REVIEW ON SHEET METAL FORMING AND ITS LATEST DEVELOPMENT OF SANDWICH MATERIALS |
K.Logesh , V.K.Bupesh Raja, J.Veerendra Rayudu, N.Sai Ganesh, R.Ali Azmath Shaik, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 59 |
EXPERIMENTAL INVESTIGATION OF CASE HARDENING OF TI-6AL-4V DURING TURNING VIA PYROLYTIC CARBURIZATION |
D.Surrya Prakash, M.Venkatasudhahar , K. Logesh , M.Bhargav Naidu, P.Ravikrishna , G.Akhil , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 60 |
VIEW FACTOR RELATIONS FOR RADIATION EXCHANGE BETWEEN PARALLEL RECTANGULAR SURFACES |
Sankarganesh P , A Devaraj , Tamil selvam N, Arun Kumar K, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 61 |
MULTIPLE PERFORMANCE OPTIMIZATION OF ELECTRIC DISCHARGE DRILLING OF INCONEL X750 USING TAGUCHI BASED GREY RELATIONAL ANALYSIS |
S. Saravanan , N.K. Karthickeyan , K.S. Akash , B. Sudharsan , M. Saravanavel , |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 62 |
OPTIMIZATION FOR RE-CONFIGURABILITY IN MODULAR RECONFIGURABLE MACHINE TOOLS |
M. Sundarraj , T. Raja , M. Karthik , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 63 |
EXPERIMENTAL PROBE OF HARDNESS, TENSILE STURDINESS AND IMPACT EVALUATION RESULT OF AL2O3 & SIC FOR DIVERSE REINFORCEMENT WEIGHTAGE |
M. Karthik , Belgin Paul.D.L, Satheshkumar.A , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 64 |
STUDY OF STRUCTURAL OPTIMIZATION ON RECONFIGURABLE MACHINETOOL |
A.Sathesh kumar, M. Karthik , D.L. Belgin Paul, K Karthik , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 65 |
ENTREPRENEURIAL OPPORTUNITIES IN WEEE RECYCLING AND FINANCIAL SUPPORT FOR ESTABLISHING TECHNOLOGY ORIENTED ENTERPRISES IN INDIA |
Chandrakumar Palanisamy, Gopikaramanan R , Prabu. K , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 66 |
PREPARATION AND PROPERTIES OF ALPHA NAPHTHOL-FORMALDEHYDE RESIN WITH NANO-HYDROXY APATITE |
N. Pugazhenthi , D.L. Belgin Paul, M. Karthik , |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 67 |
TENSILE AND HARDNESS CHARACTERISATION OF RAPID PROTOTYPED, ABS PROTOTYPES |
Sathyaseelan P , M. Thamarai Kannan, Irfan Ahmed. I, Nandineravanda Bheemaiah, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 68 |
EXPERIMENTAL INVESTIGATION OF POLYMER MATRIX C0MPOSITE FOR HEAT DISTORTION TEMPERATURE TEST |
Irfan Ahmed. I, R. Rohith Renish, K Karthik , M. Karthik , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 69 |
DESIGN AND FABRICATION OF SYNCHRONIZED CLUTCH FOR AUTOMATIC SLIDING DOOR |
D.L. Belgin Paul, A. Sathesh Kumar, M. Karthik , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 70 |
EXPERIMENTAL INVESTIGATION OF MODIFIED CARBURETOR IN 4-STROKE PETROL ENGINE: PERFORMANCE TESTING |
A Devaraj , Sankarganesh P , Tamil Selvam N, Iyankumar R , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 71 |
OPTIMIZATION OF BIO GAS RECIRCULATION VELOCITY IN BIOGAS MIXING ANAEROBIC DIGESTER WITH THE FEED OF 8% TDS USING CFD |
Jishu Chandran, D. Yogaraj , K.Manikandan , P. Jeyaraman , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 72 |
ENVIRONMENTAL FREE RECOVERY OF METALS FROM PRINTED CIRCUIT BOARDS (PCBS) OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENTS (WEEE) |
R.Gopikaramanan , P.Chandrakumar , B. Senthil Kumaran, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 73 |
VIBRATION REDUCTION IN AUTOMOBILES USING ELECTROMAGNETIC SUSPENSION SYSTEM |
R. Rohith Renish, T. Niruban Projoth, K Karthik , K. Mohan Babu, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 74 |
REDUCTION OF NOISE IN ZF GEARBOX |
E. Balaji , D. Mouli , P .Rajasekaran , S. Sudhakar , |
Volume 8,Issue 4,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 75 |
DESIGN AND DEVELOPMENT OF FDM PATTERN FOR SAND CASTING PROCESS |
S. Sekar , R. Velu , V. Ramesh , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 76 |
AUTOMATION OF MAIN BEARING BOLT AND CAP LOOSENING MACHINE FOR AUTOMOBILE CRANKSHAFT |
S. Arun , SK. Nagoorvali , K. Sunil Kumar, G.S. Mohan , |
Volume 8,Issue 2,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 77 |
MANUFACTURING AND FORCE DETERMINATION OF COMPOSITE DISC BRAKE |
R. Ramesh Kumar, V. Thiruvengadam , J. Thamilarasan , |
Volume 8,Issue 2,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 78 |
DESIGN AND ANALYSIS OF WINDMILL BLADES FOR DOMESTIC APPLICATIONS |
K. Sunil Kumar, R. Palanisamy , S. Aravindh , G. S. Mohan , |
Volume 8,Issue 1,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 79 |
CASCADED FUZZY CONTROLLER SCHEME FOR COMBUSTION CONTROL OF A UTILITY BOILER USING CONTROL BALANCE MODEL |
A. Selwin Mich Priyadharson, A. Selwin Mich Priyadharson, T.R.Rangaswamy , |
Volume 2,Issue 2,Year 2011 |
International Journal of Electrical Engineering and Technology |
| 80 |
INCREASE OF PRODUCTIVITY IN ASSEMBLY AND MACHINING LINES OF ACTUATOR ASSEMBLY LINE BALANCING |
S.Karthik , K.Balaji , |
Volume 12,Issue 4,Year 2021 |
International Journal of Management |
| 81 |
EFFECT OF SILICON CARBIDE ON SINGLE LAP JOINT GLASS FIBRE REINFORCED POLYMER MATRIX COMPOSITE |
R. Ganesh , K Karthik , A. Manimaran , |
Volume 9,Issue 6,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 82 |
DESIGN OF FLYWHEEL ROTOR AND MOTOR FOR HIGH SPEED AUTOMOBILE APPLICATIONS |
Bharathi Thangaraj, S. Suchithra , P. Chandrasekar , |
Volume 9,Issue 7,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 83 |
STRUCTURAL ANALYSIS OF PISTON BY USING VARIOUS ALUMINIUM ALLOYS |
P. Elavarasan , M.Senthil Kumar, |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 84 |
FABRICATION AND CHARACTERIZATION OF NATURAL FIBER REINFORCED HYBRID COMPOSITE MATERIALS |
K. Mohan Babu, A. Sathesh Kumar, M. Sundarraj , R. Rohith Renish, |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 85 |
AN EXPERIMENTAL INVESTIGATION ON COPPER SLAG AS REPLACEMENT OF FINE AGGREGATE IN CONCRETE |
J. Anne Mary, |
Volume 7,Issue 6,Year 2016 |
International Journal of Civil Engineering and Technology |
| 86 |
ANALYSIS OF EMISSION ON COMPRESSION IGNITION ENGINE FUELLED WITH BLENDS OF NEEM OIL ORGANIC COMPOUND |
Saran Raj, V. Ramesh , K. Logesh , M. Karthik , P. Anand , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 87 |
PERFORMANCE AND EMISSION EVALUATION OF A VCR DIESEL ENGINE USING MAHUA OIL METHYL ESTER |
Aravindh Raj B R, P Jeyaraman , N Tamil Selvam, Arun Kumar K, |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 88 |
MECHANICAL CHARACTERIZATION AND COMPARISON OF GLASS FIBER AND FIBRE REINFORCEMENT WITH ALUMINIUM ALLOY (GFRAA) TO IMPROVE THE STRENGTHENING FOR AUTOMOTIVE APPLICATION |
N. Tamil Selvam, Arun Kumar K, B.R. Aravindh Raj, I. Saran Raj, P. Jeyaraman , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 89 |
EXPERIMENTAL INVESTIGATION OF PERFORMANCE AND EMISSION ANALYSIS ON DIESEL ENGINE FUELLED WITH KARANJA OIL METHYL ESTER |
D. Yogaraj , M. Meikandan , S. Jaichandar , |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 90 |
ENHANCEMENT OF RELIABILITY OF WORK CELL IN A METAL MANUFACTURING COMPANY: A CASE STUDY |
S.Karthik , J. Silkson John, H. Mohammed Ali, S. Sekar , |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 91 |
AUTOMATIC AIR FILTER CLEANER FOR AUTOMOBILE VEHICLES |
M.Selvamuthukumar , G.Sugash , B.Gowthama Rajan, |
Volume 9,Issue 3,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 92 |
ENHANCING THE FIGURE OF MERIT IN Zn4Sb3 FOR ITS USE IN HIGH TEMPERATURE AUTOMOTIVE APPLICATIONS |
C. Sarala Rubi, D.Balaji , N.G. Renganathan , |
Volume 9,Issue 4,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 93 |
SIX SIGMA APPROACH FOR DETECTION AND REDUCING CASTING DEFECTS |
M. Sundarraj , T. Raja , M. Karthik , |
Volume 9,Issue 5,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 94 |
EXPERIMENTAL STUDY ON EPOXY INJECTION ON CONCRETE |
Nalini.S , Annapurani.M , Sivaranjani. S , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 95 |
A HIGH EFFICIENT COMPACT CPW FED MIMO ANTENNA FOR WIRELESS APPLICATIONS |
D. Dileepan , R. Sanmugasundaram , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 96 |
COMPACT QUAD BAND FILTER FOR MULTI BAND WIRELESS APPLICATIONS |
R. Sanmugasundaram , D. Dileepan , S. Sathyamoorthy , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 97 |
PLC-HMI BASED AUTOMATIC SCREEN PRINTING SYSTEM |
A. Selwin Mich Priyadharson, Prabhu Kumar Surarapu, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 98 |
AUTOMATIC TUNING AND SEMANTIC BASED CLONE DETECTION OF ANDROID APPLICATIONS |
Vishnu Priya T, Stephanie Vianna G, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 99 |
A REVIEW ON PIEZO-ELECTRIC POWER HARVESTING USING SWITCH HARVESTING ON INDUCTOR |
G. Ilangovan , M. R. Ezilarasan , M. Thanjaivadivel , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 100 |
DESIGN AND FABRICATION OF A VERTICAL GAMMA TYPE STIRLING ENGINE- A CONCEPTUAL PROTOTYPE |
Rupesh P L , M. Thamarai Kannan, K. Raja , Syed Riyaz Ahammed, Pandey Aditya Ramjathan, Paramveer Yadav, RamVineeth .K , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 101 |
OPTIMIZING MAINTENANCE STRATEGY USING SIMULATION BASED AHP |
J. Silkson John, A. Manimaran , S. Sekar , S. Karthik , |
Volume 8,Issue 9,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 102 |
A STUDY OF CLASSIFICATION BASED MACHINE LEARNING METHODS FOR DISEASE GENE PREDICTION |
K.Jayanthi , C.Mahesh , S.Sithsabesan , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 103 |
TOPOLOGICAL INSULATORS AND THEIR APPLICATION DEVICES |
C. Sarala Rubi, D. Balaji , N. G. Renganathan , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 104 |
INTERNET OF THINGS BASED ACCIDENT DETECTION AND PREVENTION |
N. Gomathi , P.B. Senthil Kumar, Haritha S , Sivaiah P , Sai Sowmiya G, |
Volume 8,Issue 9,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 105 |
PERFORMANCE AND UPGRADING THE 1.3 LITRE NATURALLY - ASPIRATED DIESEL ENGINE TO MEET CURRENT EMISSION NORMS FOR GENERATOR APPLICATION |
G.Sugash , B.Gowthama Rajan, V.Ramani , T.Ravichandran , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 106 |
ENCHANCED FAULT -TOLERANT METHOD FOR SUBWAY APPLICATIONS |
Barathi , Priscilla Whitin, Smilee Mathuram, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 107 |
KEIL RTOS BASED EMBEDDED WEB SERVER FOR REAL TIME INDUSTRIAL MONITORING |
A.Yogaraj , C.S.Sivanthiram , S.Dhananjeyan , S.Suresh , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 108 |
REVIEW ON MANUFACTURING OF FIBRE METAL LAMINATES AND ITS CHARACTERIZATION TECHNIQUES |
K.Logesh , V.K.Bupesh Raja, Vipin H Nair, Sreerag K.M , Vishvesvaran K.M , M.Balaji , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 109 |
CONTROLLING A MOVEMENT OF ROBOTIC ARM USING LINEAR FLAT CONTROL METHOD |
R.Hushein , M.Shri Harish, R.Hashein , Syed Riyaz Ahammed, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 110 |
INTEGRATED IMAGE PROCESSING ALGORITHM FOR BRAIN TUMOR DETECTION, SEGMENTATION AND CLASSIFICATION |
Rajiv S , Pushpakumar R , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 111 |
AN INVESTIGATION ON EFFECTS OF FATIGUE LOAD ON VIBRATION CHARACTERISTICS OF WOVEN FABRIC GLASS/CARBON HYBRID COMPOSITE BEAM UNDER FIXED-FREE END CONDITION USING FINITE ELEMENT METHOD |
D. Rajesh , V. Balaji , A Devaraj , D. Yogaraj , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 112 |
DESIGN AND ANALYSIS OF PLASTICS GEAR FOR HEAVY DUTY APPLICATIONS BY FEA METHOD |
T. Ramesh , K Karthik , R. Ganesh , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 113 |
INVESTIGATING ILPD FOR MOST SIGNIFICANT FEATURES |
Jothi Lakshmi U, K.Jayanthi , M.Sathya , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 114 |
DESIGN AND FABRICATION OF THERMOSTAT VALVE FOR MARATHI ALTO VEHICLE USING REVERSE ENGINEERING |
P. Jeyaraman , Arun Kumar K, B.R. Aravindh Raj, I. Saran Raj, M. Saleem , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 115 |
A CFD ANALYSIS FOR OPTIMIZATION OF TOTAL DISOLVED SOLIDS IN IMPELLER MIXING SOLID WASTE ANAEROBIC DIGESTER |
K. Manikandan , Jishu Chandran, A Devaraj , R. Ganesh , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 116 |
INSTANCE BASED MATCHING SYSTEM FOR COMMON ONTOLOGY`S |
Pushpakumar R , Rajiv S , |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 117 |
TRUST BASED PREVENTION METHOD IN WIRELESS NETWORK |
G. Stephanie Vianna, T. Vishnu Priya, |
Volume 8,Issue 9,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 118 |
VIBRATION DAMPING CHARACTERISTICS OF CANTILEVER BEAM USING PIEZOELECTRIC ACTUATOR |
R. Ganesh , K Karthik , A. Manimaran , M. Saleem , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 119 |
DESIGN AND ANALYS OF KNUCKLE STREERING USING FINITE ELEMENT ANALYSIS |
M.Senthil Kumar, R. Ramesh Kumar, Mathew Alphonse, K Karthik , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 120 |
DESIGN AND THERMAL ANALYSIS OF STIRLING ENGINE USING INDUSTRIAL APPLICATIONS OF CERAMIC MATERIAL |
Mathew Alphonse, R. Ramesh Kumar, M.Senthil Kumar, K Karthik , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 121 |
OPTIMIZATION OF MACHINING PARAMETERS OF OHNS STEEL BY USING EDM |
V. Ramesh , P. Anand , M. Soundar , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 122 |
IMPROVING THERMAL EFFICIENCY OF DIESEL ENGINE BY USING CERAMIC COATING ON CYLINDER LINER AND PISTON HEAD |
M. Soundar , P. Anand , V. Ramesh , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 123 |
EXPERIMENTAL AND COMPUTATIONAL EVALUATION OF EMISSIONS OF AN ENGINE WITH A RE-ENTRANT PISTON BOWL - A VALIDATION |
M. Thamarai Kannan, Rupesh P L , Raja K , M.P Siva , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 124 |
DESIGN AND ANALYSIS OF NACA4420 WIND TURBINE AEROFOIL USING CFD |
S. Jebarose Juliyana, J. Udaya Prakash, K Karthik , P. Pallavi , M. Saleem , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 125 |
EVALUATION OF MECHANICAL PROPERTIES OF NATURAL FIBRE REINFORCED COMPOSITES - A REVIEW |
T. Raja , P. Anand , M. Karthik , M. Sundarraj , |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 126 |
DESIGN AND CONTROL OF ATC FOR SHORTER TIME INTERVAL IN CNC MACHINES |
M. Karthik , M. Sundarraj , T. Raja , |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 127 |
FABRICATION AND COMPUTATIONAL ANALYSIS OF CENOSPHERE REINFORCED ALUMINUM METAL MATRIX COMPOSITE DISC BRAKES |
R. Kousik Kumaar, G Kannan , Boopathy G , G. Surendar , |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 128 |
DESIGN AND FABRICATION OF NATURAL RAMIE/EPOXY COMPOSITE BICYCLE FRAME WITH EXPERIMENTAL AND FEA-ABAQUS ANALYSIS |
M. Saleem , E. Gopi , Rajagurunathan , V. Vishnu , S. Jebarose Juliyana, |
Volume 8,Issue 6,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 129 |
DEVELOPMENT OF AN AUGMENTED EXOSKELETON |
Ekanshu Khurana, T. Harsha Vardhan Reddy, Shreshth Gupta, R.B.S.V Siva Kumar, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 130 |
DESIGN AND ANALYSIS OF GATE VALVE BODY AND SEAT RING |
S. Sathish Kumar, R. Hemanathan , R. Gopinath , D. Dilipkumar , |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 131 |
CFD ANALYSIS OF SUPERSONIC NOZZLE FOR PLASMA WIND TUNNEL |
Arun Nema, G Kannan , R. Jagan Raj, Shailendra Kumar Mishra, |
Volume 8,Issue 7,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 132 |
RENEWABLE ENERGY BASED TORQUE CONTROL OF SQIM BASED ON VOLTAGE ANGLE |
Prabu. K , Vinoth John Prakash. S, Barathi. K , Gopikaramanan R , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 133 |
COMPARISON OF SINGLE LAYER AND DOUBLE LAYER WINDING IN SURFACE MOUNTED PMSG FOR AIRCRAFT APPLICATION |
Bharathi Thangaraj, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 134 |
EXHAUST GAS HEAT UTILIZATION IN IC ENGINES USING PRE-HEATER |
K.Raja , Amala Justus selvam, M. Thamarai Kannan, P.L Rupesh , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 135 |
DESIGN AND DEVELOPMENT OF SPECIAL PURPOSE MACHINE USING HYDROPNEUMATIC CYLINDERS TO DO 4 HOLES AND 2 HOLES PIERCING IN A SQUARE TUBE |
S. Sathish Kumar, R. Swaminathan , S. Mithun Sena, P.T. Dinakaran , |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 136 |
REVIEW ON NON-DESTRUCTIVE TESTING OF COMPOSITE MATERIALS IN AIRCRAFT APPLICATIONS |
Boopathy G , G.Surendar , Aun Nema, T.P.Prem Anand, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 137 |
MULTIFARIOUS HYDROGEN STORAGE ON CARBON RELIED ADSORBENT TOPOLOGIES FOR FUEL CELL APPLICATIONS |
Tamilazhagan G.A , Vinson Joshua S, Thilipkumar C , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 138 |
REVIEW ON ONE MANNED AIRCRAFT |
Sumathy Muniamuthu, Karthikeyan T , Poovazhagan V , Poovarasan D , Ramki P , |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 139 |
EXPERIMENTAL INVESTIGATION AND MECHANICAL CHARACTERIZATION OF CARBON NANOTUBES/AA6063 ALUMINIUM METAL MATRIX COMPOSITE USING STIR CASTING METHOD |
P.B. Senthil Kumar, R.Hushein , K. Logesh , K.Inbarasan , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 140 |
ROBOT ARM CONTROL USING IMAGE PROCESSING AND MATLAB FOR SIMPLE WRITING BY HUMAN GESTURES |
Syed Riyaz Ahammed, Manoj Kumar.V, BachinaHarish Babu, M. Shri Harish, R.Hushein , |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 141 |
OPTIMIZED WATER PUMPING SYSTEM USING ARDUINO FOR HOME AUTOMATION |
M. Shri Harish, Syed Riyaz Ahammed, R.Hushein , Manoj Kumar.V, Bachina Harish Babu, |
Volume 8,Issue 8,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 142 |
DESIGN AND EXPERIMENTAL ANALYSIS OF RACK AND PINION DYNAMO PROTOTYPE |
Bharani Chandar .J, Lokeshh .M , Sajeev .S , Vikram Varma .S, |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 143 |
OPEN LOOP AND CLOSED LOOP ANALYSIS OF INTERLEAVED CONVERTER FOR SOLAR POWER GENERATION SYSTEMS |
S.Krishnan , K.Pradeepa , P.Thirumal , |
Volume 8,Issue 12,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 144 |
ELIMINATION OF REJECTION IN INJECTOR MANUFACTURING PROCESS BY USING HYDRAULIC FIXTURE |
P. Yogesh , C. Arun , R. Arunkumar , S. Muruganantham , P. Abinesh , |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 145 |
EXPERIMENTAL ANALYSIS OF NOISE AND VIBRATION REDUCTION IN WINDMILL GEAR BOX FOR 5MW WIND TURBINE |
K. Sunil Kumar, S. Arun , A. Mohan , Sumathy Muniamuthu, |
Volume 7,Issue 6,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 146 |
STRUCTURAL ANALYSIS OF EXHAUST MANIFOLD FOR 1500 HP ENGINE |
N.K. Karthickeyan , Arun S , Mohan G.S , Sunil Kumar K, |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 147 |
THERMOELECTRIC FAN AND ICE CHEST POWERED BY CANDLE |
R. Palanisamy , S. Sathish Kumar, M. Saravanan , M. Karthikeyan , K. Pavankishore , |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 148 |
ELIMINATION OF OIL LEAK COMPLAINTS IN RH COVER PARTS ASSEMBLY |
P. Karthikeyan , S. Sathish Kumar, T. Karmuhilan , D. Mathivanan , V. Vijay , |
Volume 8,Issue 3,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 149 |
MATERIAL DEVELOPMENT FOR THERMO MECHANICAL STRAINED STRUCTURAL APPLICATION |
S. Sathish Kumar, M. Kannan , P. Amirthalingam , S. Arunkumar , N. S. Natesh , |
Volume 7,Issue 6,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 150 |
DESIGN AND STRUCTURAL ANALYSIS OF LIQUIFIED CRYOGENIC TANK UNDER SEISMIC AND OPERATING LOADING |
K. Sunil Kumar, B. Nagalingeswara Raju, J. Arulmani , P. Amirthalingam , |
Volume 7,Issue 6,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 151 |
INVESTIGATION ON MECHANICAL PROPERTIES OF AL 7075-AL2O3 METAL MATRIX COMPOSITE |
Sumathy Muniamuthu, Naga Lingeswara Raju, S. Sathish Kumar, K. Sunil Kumar, |
Volume 7,Issue 6,Year 2016 |
International Journal of Mechanical Engineering and Technology |
| 152 |
MECHATRONIC SYSTEM BASED MANUAL TRANSMISSION |
P. Sarath Babu, |
Volume 6,Issue 1,Year 2015 |
International Journal of Mechanical Engineering and Technology |
| 153 |
MULTI OBJECTIVE OPTIMIZATION OF NEAR-DRY EDM PROCESS USING RESPONSE SURFACE METHODOLOGY |
P. A. Deshmukh , P. R. Cheke , R. D. Shelke , |
Volume 5,Issue 2,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 154 |
ANALYTICAL INVESTIGATION ON HYBRID FIBRE REINFORCED CONCRETE BEAM |
M. Vinod Kumar, Y.M. Siddharamaiah , C. Jaideep , K.R. Aswin Sidhaarth, |
Volume 9,Issue 10,Year 2018 |
International Journal of Civil Engineering and Technology |
| 155 |
A REVIEW ON ADSORPTION OF NICKEL AND MERCURY FROM AQUEOUS SOLUTION USING NANOPARTICLES |
K.R. Aswin Sidhaarth, S.Baskar , |
Volume 9,Issue 9,Year 2018 |
International Journal of Civil Engineering and Technology |
| 156 |
ADSORPTION OF CONGO RED DYE USING COBALT FERRITE NANOPARTICLES |
K.R. Aswin Sidhaarth, J.Jeyanthi , S.Baskar , M. Vinod Kumar, |
Volume 9,Issue 9,Year 2018 |
International Journal of Civil Engineering and Technology |
| 157 |
STUDIES ON CORROSION OF REINFORCED GEOPOLYMER CONCRETE BEAMS |
T. Udhaya Kumar, M. Jayadurgalakshmi , |
Volume 9,Issue 9,Year 2018 |
International Journal of Civil Engineering and Technology |
| 158 |
ONE-TIER CACHE SYSTEM APPLIED TO DATA MINING TECHNIQUES TO ENHANCE THE INFORMATION SECURITY IN THE CLOUD |
N.K. Senthil Kumar, M. Uvaneshwari , M. Viswanathan , K. Amsavalli , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 159 |
SIMULATION OF MULTIPROTOCOL LABEL SWITCHING USING RSVP-TE |
Almas Begum, Alex David S, Praveena Anjelin D, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 160 |
EXPERIMENTAL INVESTIGATION IN SINGLE CYLINDER VCR MULTIFUEL ENGINE USING DIESEL |
R. Rohith Renish, Arun Pranesh M, T. Niruban Projoth, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 161 |
COMPARATIVE ORGANIZATIONAL CLIMATE OF PERMANENT AND TEMPORARY WORKERS IN CONSTRUCTION INDUSTRY |
K. Ravishankar , H. Moideen Batcha, |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 162 |
IMPROVEMENT OF GROUND WATER LEVEL BY POROUS CONCRETE CONSTRUCTION |
Anne Mary J, Samson S , Saravanakumar R M , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 163 |
EXPERIMENTAL STUDY ON STEEL FIBER REINFORCED CONCRETE IN BEAM-COLUMN JOINT |
Krishna Kumar Athithan A, R. Robert Singh, Sri Gomathi A B, |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 164 |
DESIGN OF WIND SOLAR AND PUMPEDSTORAGE HYBRID POWER SUPPLY SYSTEM |
S. Sivakumar , P. Sivaraj , K. Siddappa Naidu, |
Volume 8,Issue 10,Year 2017 |
International Journal of Mechanical Engineering and Technology |
| 165 |
FILTERING OF BAD PACKETS USING RANKING ALGORITHM |
Antony Kumar K, Tamilmani G , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 166 |
SECURE STORAGE SERVICES AND ERASURE CODE IMPLEMENTATION IN CLOUD SERVERS |
G.S. Raj , M. Viswanathan , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 167 |
EFFECTIVE MANLESS VEHICLE CHARGING SYSTEM WITH RFID |
Usha V , Saranya Jothi C, Ravikumar S , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 168 |
A SURVEY OF INTRUSION DETECTION WITH HIGHER MALICIOUS MISBEHAVIOR DETECTION IN MANET |
D. Rajalakshmi , K. Meena , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 169 |
ENHANCED PRIVACY SETTINGS IN ONLINE CONTENT SHARING WEBSITES USING KEY DISTRIBUTION CENTER (KDC) |
Ganesan R , Hemalatha D , Justin Joseph, |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 170 |
MINING HEALTH RECORD OF THE PATIENTS |
M. Viswanathan , G.S. Raj , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 171 |
EXPLOITATION OF CONTENT MANAGEMENT SYSTEM VULNERABILITIES TO LAUNCH LARGE SCALE CYBER ATTACKS |
R Vinoth Kumar, K Kishore Kumar, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 172 |
OPTIMIZED ADAPT VISUALIZATION NETWORK ABSURD IOT CONGENITAL BLOCKAGE INNOVATOR |
Hemalatha D , Ganesan R , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 173 |
ENCRYPTED MULTI KEYWORD SEARCHING FOR SECURED CLOUD STORAGE |
Tamilmani G , M. Kavitha , K. Rajathi , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 174 |
FERTILIZER RECOMMENDATION SYSTEM FOR COCONUT CULTIVATION |
T. Sujithra , M. Thanjaivadivel , S. Durai , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 175 |
SURVEY OF EFFECTIVE TEACHING MECHANISMS AND ICT TOOLS FOR EDUCATION |
S. Durai , P. Darwin , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 176 |
TRAFFIC OBSTRUCTION HANDLING WITH IMAGE PROCESSING |
Rupavathy .N , Carmel Mary Belinda M.J, Alex David S, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 177 |
DYNAMIC DATA INTEGRITY AND CHECKPOINT RECOVERY USING PUBLIC AUDITING IN CLOUD STORAGE |
Saranya Jothi C, Usha V , Alex David S, |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 178 |
ANOMALY DETECTION OVER DISTRIBUTED DATA LOCATIONS |
K. Vijayalakshmi , Alex David S, G. Nivedhitha , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 179 |
EXPERIMENTAL INVESTIGATION OF COCONUT SHELL AS PARTIAL REPLACEMENT OF COARSE AGGREGATE AND ADDING STEEL FIBRE IN CONCRETE |
R. Robert Singh, R. Veerakumar , T. Nelson Ponnu Durai, I. Iswarya , |
Volume 8,Issue 8,Year 2017 |
International Journal of Civil Engineering and Technology |
| 180 |
MEASURING MACRO NUTRIENTS OF THE SOIL FOR SMART AGRICULTURE IN COCONUT CULTIVATION |
T. Sujithra , S. Durai , M. Thanjaivadivel , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 181 |
HIGH-SPEED VLSI IMPLEMENTATION SYSTEMATIC SCHEME FOR DWT |
M. Vijay Albert William, D. Balaji , K. Bhaskar , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 182 |
MINIMIZATION OF ENERGY CONSUMPTION USING RGB WHITE PROCESS IN CLOUD |
R. Hariharan , S. Saran Raj, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 183 |
DATA INTEGRITY MAINTENANCE WITH EFFICIENT USER REVOCATION IN CLOUD USING NOVEL AUDITING APPROACH |
V.M. Vinayagam , N. Rajkumar , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 184 |
A PEDAGOGICAL APPROACH FOR ENGINEERING EDUCATION |
K. Rajathi , R.Vinoth Kumar, G.Tamilmani , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 185 |
DESIGN AND ANALYSIS OF DAMPER SPRING AND ITS STRUCTURAL COMPONENTS |
C. Rajkumar , S. Jayavelu , R. Ramesh Kumar, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 186 |
MINIMIZING AND MAXIMIZING OF ENCODED IMAGE BY WAVELET TRANSFORM |
Manikandan N K , Manivannan D , Antony Kumar K, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 187 |
FRAGILITY CURVES BY SAC FEMA AND ANN METHOD |
L. Avinash Karthick, M. Sriraman , T. Nelson Ponnu Durai, D.C. Haran Pragalath, |
Volume 8,Issue 7,Year 2017 |
International Journal of Civil Engineering and Technology |
| 188 |
OPTIMAL POWER DISPATCH METHOD IN A MULTI NODE SYSTEM USING KF ALGORITHM |
M. Rajeev Kumar, D. Balaji , M. Vijay Albert William, K. Bhaskar , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 189 |
AUTOMATION OF PARCEL DELIVERY COLLECTION USING IOT - SMART FREIGHT BOX |
Nivedhitha.G , T. Sujithra , Aksheya Suresh, Bhavadharani , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 190 |
SMART ATTENDANCE AND LIVE LOCATION MAPPING USING UHF RFID |
M. Rajeev Kumar, S.Muthu Vijaya Pandian, P.Vinothkumar , J.Velmurugan , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 191 |
A HIGHLY EFFICIENT AUDIO-VISUAL RECOGNITION SYSTEM BASED ON MULTIBAND FEATURE |
Manivannan D , Manikandan N K , Ravikumar S , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 192 |
SMART CAB: APPLICATION FOR CALL TAXI USER AND VENDORS FOR BEST SERVICES |
N. Rajkumar , V. M. Vinayagam , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 193 |
EXTENSION OF STOCHASTIC ANALYSIS MODEL TO THREE PRODUCTS INVENTORY SYSTEM WITH SCBZ SEASONAL PRODUCTION AND SALES |
D. Kanagajothi , S. Parvathi , S. Srinivasaragavan , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 194 |
DESIGN AND ANALYSIS OF VIBRATION AND HARSHNESS CONTROL FOR AUTOMOTIVE STRUCTURES USING FINITE ELEMENT ANALYSIS |
S. Jayavelu , C. Rajkumar , R. Ramesh Kumar, D. Surryaprakash , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 195 |
AUTOMATIC DETECTION OF GLAUCOMA THROUGH CHANNEL EXTRACTION ADAPTIVE THRESHOLD METHOD |
M. Shyamala Devi, A. N. Sruthi , S. Vinodhini , |
Volume 8,Issue 11,Year 2017 |
International Journal of Civil Engineering and Technology |
| 196 |
SHORTEST PATH AND ENERGY EFFICIENT NETWORK THROUGH HIGH PERFORMANCE INTELLIGENT NODE WITH LESS DELAY PROTOCOL IN MANETS |
T. Senthil Murugan, |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 197 |
PERSON ANAMNESIS TRACKING SYSTEM USING CLOUD COMPUTING |
S. Saran Raj, R. Hariharan , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 198 |
THE PERFORMANCE EVALUATION OF TRANSPORT LAYER PROTOCOL IN CONSTRAINED ENVIRONMENT OF IOT |
R.H. Aswathy , P. Suresh , N. Malar Vizh, M. Akila , |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
| 199 |
CHINA`S NANJING VS INDIA`S DELHI - A PERSPECTIVE FOR VERTICAL FOREST |
Saravanan J , M. Jayadurgalakshmi , Karthickraja R , |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
| 200 |
DECLAMORING HRI DUPLICATE BY ANISOTROPIC DISSEMINATION STRAINING |
Alex David S, C. Mahesh , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 201 |
BACTERIA DETECTION USING QCM SENSOR |
A. Farithkhan , C. Ambika Bhuvaneswari, Shailendra Kumar Mishra, V. Vinothkumar , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 202 |
AN INNOVATIVE DISTINCTION ON NONNARROW WAY ALGORITHM FOR DENOISING |
Ravikumar S , E. Kannan , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 203 |
LOAD BALANCING AND RUNTIME PREDICTION USING MAP REDUCE FRAMEWORK |
M. Uvaneshwari , N.K. Senthil Kumar, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 204 |
A REALISTIC SURVEY ON CHARACTERISED GRID REALLOCATION STRATEGY WITH ITS THROUGHPUT PHENOMENON |
R.Sivasubramanian , K. Arthi , |
Volume 8,Issue 11,Year 2017 |
International Journal of Civil Engineering and Technology |
| 205 |
A NEW APPROACH FOR COORDINATING OF DENTAL RADIOGRAPHS AND PHOTOGRAPHS IN HUMAN FORENSIC IDENTIFICATION |
K. Durairaj , R Arumuga Arun, A.G Bala Murugan, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 206 |
IOT BASED ACCESS AND ANALYSIS OF WIRELESS SENSOR NODE PROTOCOLS WITH LOW POWER HOST CONNECTIVITY |
C. Malathi , M. Nithyavelam , |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
| 207 |
A PHENOMENOLOGICAL SURVEY ON VARIOUS TYPES OF BRAIN DISEASES USING SOFT COMPUTING TECHNIQUES |
E Murali , K. Meena , |
Volume 8,Issue 9,Year 2017 |
International Journal of Civil Engineering and Technology |
| 208 |
INTERNET OF THINGS AND ITS NEED TO THE EXISTING WORLD |
K Kishore Kumar, R Vinoth Kumar, S. Durai , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 209 |
A Secure Loading Routing Protocol in IOT using Block Chain Technology |
Suresh Mundru, K Meena , |
Volume 19,Issue 4,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
| 210 |
An Intrusion Detection System for Network Security based on an Advanced Honeypots Server |
K. Veena , K. Meena , |
Volume 19,Issue 4,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
| 211 |
IMPLEMENTATION OF IOT IN SMART IRRIGATION SYSTEM USING ARDUINO PROCESSOR |
V. Vinothkumar , R.RAMASAMY , S.JANARTHANAN , M. VASIMBABU , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 212 |
ENERGY DENSITY CLUSTER BASED ROUTING ALGORITHM WITH ISOLATED NODES IN WIRELESS SENSOR NETWORKS |
Srinivasan. R , E. Kannan , |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 213 |
MECHATRONIC SYSTEM BASED MANUAL TRANSMISSION |
P. Sarath Babu, |
Volume 6,Issue 1,Year 2018 |
International Journal of Thermal Engineering |
| 214 |
NANOWASTE |
Saravanan J , Karthickraja R , Vignesh J , |
Volume 8,Issue 12,Year 2017 |
International Journal of Civil Engineering and Technology |
| 215 |
A Hybrid Approach to the Classification of Brain Tumours from MRI Images using Fast Bounding Box Algorithm |
E.Murali , K. Meena , |
Volume 19,Issue 4,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
| 216 |
Performance Evaluation of Cyber Criminal Detection Techniques |
K. Veena , K. Meena , |
Volume 19,Issue 4,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
| 217 |
An Efficient Technique of Intrusion Detection for Large Number of Malicious Nodes in MANET using a Tree Classifier |
D. Rajalakshmi , K Meena , |
Volume 19,Issue 4,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
| 218 |
CUSTOMER PRESERVENCE FOR AN ORGANISATION USING DATA MINING |
Umamaheswari R , Siva Purnima S, S. Saravana Mahesan, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 219 |
ACUTE LYMPHOBLASTIC LUKEMIA DIAGNOSIS IN BLOOD MICROSCOPIC IMAGES USING LOCAL BINARY PATTERN AND SUPERVISED CLASSIFIER |
A. N. Sruthi , S. Vinodhini , M. Shyamala Devi, |
Volume 8,Issue 11,Year 2017 |
International Journal of Civil Engineering and Technology |
| 220 |
OFDM SPATIAL MULTIPLEXING USAGE IN A MULTIUSER ENVIRONMENT FOR SINR ANALYSIS OF MUTUAL INFORMATION DISTRIBUTION |
Shailendra Kumar Mishra, Balavignesh.V , Shubhra Ranjani, |
Volume 8,Issue 10,Year 2017 |
International Journal of Civil Engineering and Technology |
| 221 |
Simulation of Heat Distribution in MMAW with Simultaneous Cooling Effect |
Manmohan Yadav, Rathin Dutta, Rohit Ranjan, |
Volume 3,Issue 6,Year 2015 |
International Journal of Research in Mechanical Engineering |
| 222 |
Metal Casting Defects and Prevention |
M.Narasimha , S. Ramesh , |
Volume 2,Issue 4,Year 2014 |
International Journal of Engineering and Technology Research |
| 223 |
STOCHASTIC ANALYSIS OF TRANSMISSION OF DIABETIC THRESHOLD USING PARTICULAR DISTRIBUTION |
Sreelakshmi Lingineni, S. Srinivasaragavan , |
Volume 8,Issue 11,Year 2017 |
International Journal of Civil Engineering and Technology |
| 224 |
MICROBIAL REDUCTION OF NUTRIENTS FROM COMBINED INDUSTRIAL AND MUNICIPAL WASTEWATER |
T. Nelson Ponnu Durai, Saravanan J , Sridhar M , |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
| 225 |
ELECTROCHEMICAL INVESTIGATION OF THE CORROSION BEHAVIOUR OF MICRO ALLOYED STEEL AND COLD FORMED STEEL IN HCL SOLUTION |
Annapurani.M , Sivaranjani. S , Nalini.S , |
Volume 9,Issue 1,Year 2018 |
International Journal of Civil Engineering and Technology |
| 226 |
DESIGN OF POROUS PAVER CONCRETE BLOCK |
R. Veerakumar , |
Volume 9,Issue 7,Year 2018 |
International Journal of Civil Engineering and Technology |
| 227 |
DEFLUORIDATION OF GROUNDWATER USING SURFACE FUNCTIONALIZED LECA BALLS |
Bharath M , Saravanan J , Sridhar M , |
Volume 9,Issue 6,Year 2018 |
International Journal of Civil Engineering and Technology |
| 228 |
A NOVEL ENERGY EFFICIENT NETWORK ROUTING PROTOCOL FOR LIFETIME IMPROVEMENTS IN WIRELESS SENSOR NETWORKS |
Anil G.L , J L Mazher Iqbal, |
Volume 19,Issue 6,Year 2018 |
International Journal of Simulation: Systems, Science and Technology |
| 229 |
Employer Branding: A Literature Survey |
Shabanabi .P , Geeta Kesavaraj, |
Volume 9,Issue 2,Year 2019 |
International Journal of Engineering and Management Research |
| 230 |
Analyzing and Predicting Cyber Security Violations using Machine Learning Techniques |
Veeramakali T , G. Swapna , P Ila Chandana Kumari, V N L N Murthy , |
Volume 8,Issue 2,Year 2021 |
European Journal of Molecular & Clinical Medicine |
| 231 |
DESIGN AND DEVELOPMENT OF GENERATE ELECTRICITY AND PETROLEUM THROUGH WASTE GARBAGE |
P. K. Dhal , |
Volume 7,Issue 4,Year 2020 |
Global Journal of Engineering Science and Researches |
| 232 |
DESIGN AND DEVELOPMENT OF WIRELESS CHARGING IN ELECTRIC VEHICLE |
Shrikant Kumar Singh, Nikita Shanker, P. K. Dhal , |
Volume 7,Issue 3,Year 2020 |
Global Journal of Engineering Science and Researches |
| 233 |
MRI IMAGE BASED TEXTURE ANALYSIS AND CLASSIFICATION OF BRAIN TUMOR USING MLBP AND EMLRF TECHNIQUES |
P.Harish , S.Baskar , Sagunthala , |
Volume 7,Issue 18,Year 2020 |
Journal of Critical Reviews |
| 234 |
Data Storage and Memory Management Data in Cloud Computing Applications Using Similarity And Locality Based Deduplication |
S.Sabeetha Saraswathi, N.Malarvizhi , |
Volume 4,Issue 1,Year 2018 |
International Journal for Modern Trends in Science and Technology |
| 235 |
Neutrosophic α m-continuity |
R. Dhavaseelan , R. Narmada Devi, S. Jafari , Qays Hatem Imran, |
Volume 27,Issue ,Year 2019 |
Neutrosophic Sets and Systems |
| 236 |
Novel Idea of NGδ-α-Locally Continuous Functions |
R. Narmada Devi, |
Volume 13,Issue 2,Year 2021 |
International Journal of Neutrosophic Science |
| 237 |
A STUDY ON FARMERS` MARKETING STRATEGIES FOR AGRICULTURAL PRODUCE AND PROBLEMS FACED BY THE FARMERS DURING COVID-19 LOCKDOWN WITH REFERENCE TO CHITTOORDISTRICT, ANDHRA PRADESH |
P. BAYYA REDDY, M.S.R.MARIYAPPAN , |
Volume 10,Issue 10,Year 2021 |
International Journal for Innovative Engineering and Management Research |
| 238 |
Health Monitoring Wearable Device Using Internet Of Things |
R. Vani , D.Subitha , |
Volume 7,Issue 3,Year 2020 |
European Journal of Molecular & Clinical Medicine |
| 239 |
Current Mathematical Models and Numerical Simulation of SIR Model for Coronavirus Disease - 2019 (COVID-19) |
M. Suba , R.Shanmugapriya , S.Balamuralitharan , G. Arul Joseph, |
Volume 7,Issue 5,Year 2020 |
European Journal of Molecular & Clinical Medicine |
| 240 |
NEW TECHNOLOGICAL INNOVATION AND CHALLENGING ISSUES IN CAR |
G.Sasikala , V.Mahalakshmi , |
Volume 7,Issue 8,Year 2020 |
European Journal of Molecular & Clinical Medicine |
| 241 |
IMPLEMENTATION OF DYNAMIC AND FAST MINING ALGORITHMS ON INCREMENTAL DATASETS TO DISCOVER QUALITATIVE RULES |
Pannangi NARESH, R. SUGUNA , |
Volume 17,Issue 3,Year 2021 |
Applied Computer Science |
| 242 |
EFFICIENT DATA CENTER SCHEDULING FOR BIG INFORMATION APPLICATION USING EFFECTIVE CLIENT HANDLING MANAGEMENT TECHNIQUE (ECHMT) IN CLOUD COMPUTING |
Sugumaran D , Bharathi C.R , |
Volume 11,Issue 12,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 243 |
Properties on Topologized Domination in Neutrosophic Graphs |
R. Narmada Devi, G.Muthumari , |
Volume 47,Issue ,Year 2021 |
Neutrosophic Sets and Systems |
| 244 |
DESIGN OF COMPOSITE NANO INK BASED WEARABLE ANTENNA FOR E-TEXTILE APPLICATIONS |
D.Subitha , K. N V S S Dinesh , P.Rajasekhar , A. Koushik phanikumar, |
Volume 6,Issue 3,Year 2022 |
International Journal of Trendy Research in Engineering and Technology |
| 245 |
Properties of Detour Central and Detour Boundary Vertices in Neutrosophic Graphs |
R. Narmada Devi, G.Muthumari , J. Bravelin Jersha, |
Volume 18,Issue 3,Year 2022 |
International Journal of Neutrosophic Science |
| 246 |
PRECISION AQUACULTURE USING IOT & MACHINE LEARNING TECHNIQUES |
Manoj M , Reeja R Rajan, |
Volume 2,Issue 1,Year 2021 |
AGPE The Royal Gondwana Research of History, Science, Economic, Political and Social Science |
| 247 |
Internet of Things (IoT) Enabled Air Quality Monitoring System for Conventional and UAV Application |
V. Vinothkumar , G.Sasikala , |
Volume 21,Issue 1,Year 2022 |
Nature Environment and Pollution Technology |
| 248 |
MARKETING SCENARIO OF WATER DESALINATION TECHNOLOGY IN INDIA - A CONCEPTUAL STUDY |
G. Chandramowleeswaran , S. Arul Krishnan, K. Prakash , |
Volume 8,Issue 8,Year 2022 |
World Journal of Engineering Research and Technology |
