| 1 |
IMPLEMENTATION OF ELLIPTIC - CURVE CRYPTOGRAPHY |
Monika , Tanya Tomar, Vineet Kumar, Yogesh Kumar, |
Volume 11,Issue 2,Year 2020 |
International Journal of Electrical Engineering and Technology |
| 2 |
RESPONSE ANALYSIS OF PLUS SHAPED TALL BUILDING WITH DIFFERENT BRACING SYSTEMS UNDER WIND LOAD |
Ritu Raj, Shubhangi Jha, Shreyansh Singh, Siddhant Choudhary, |
Volume 11,Issue 3,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 3 |
TWITTER SENTIMENT ANALYSIS USING N-GRAM WITH NAIVE BAYES CLASSIFIER |
Rajat Kumar Arya, Rajni Jindal, |
Volume 11,Issue 6,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 4 |
REFINING YOLOV4 FOR VEHICLE DETECTION |
Pooja Mahto, Priyamm Garg, Pranav Seth, J Panda , |
Volume 11,Issue 5,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 5 |
AN INSIGHT IN PMUS FOR POWER SYSTEM STATE ESTIMATION |
Anadi Shankar Jha, |
Volume 8,Issue 4,Year 2017 |
International Journal of Electrical Engineering and Technology |
| 6 |
STATISTICAL ANALYSIS OF THE RELATION BETWEEN THE DEVELOPMENTAL STATUS OF NATIONS AND THEIR BANKS` NPA USING HYPOTHESIS TESTING |
Ranganath M. Singari, Nand Kumar, Mridul Gupta, Nimish Sharma, Keshav Aggarwal, Gangesh Chawla, |
Volume 11,Issue 8,Year 2020 |
International Journal of Management |
| 7 |
TRANSFORMING MANUFACTURING PROCESSES WITH THE HELP OF AI |
Keshav Aggarwal, Shaswat Garg, Prakash Budhaulia, |
Volume 11,Issue 8,Year 2020 |
International Journal of Mechanical Engineering and Technology |
| 8 |
DYNAMIC STUDY OF STEP BACK AND SET BACK BUILDING |
Krishna Kumar, Sristi Gupta, Shivam Kumari, Ravi Kumar, |
Volume 9,Issue 5,Year 2018 |
International Journal of Civil Engineering and Technology |
| 9 |
THE STATUS OF WOMEN PARTICIPATION IN ENGINEERING AND TECHNOLOGY PROFESSION AND THEIR CHALLENGES IN WORKING INSTITUTIONS |
Addissie Melak, Seema Singh, |
Volume 11,Issue 11,Year 2020 |
International Journal of Management |
| 10 |
A STUDY ON OPTIMIZATION OF DEFLECTOR PLATE ANGLE IN SAVONIUS HYDROKINETIC TURBINES USING CFD |
Pawan Kumar Pulijala, Raj Kumar Singh, |
Volume 11,Issue 10,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 11 |
HAMMING DISTANCE BASED LOCAL BINARY PATTERN FOR BIOMEDICAL IMAGE RETRIEVAL |
Heena Hooda, Om Prakash Verma, |
Volume 11,Issue 10,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 12 |
STOCK MARKET PRICE PREDICTION USING LONG-SHORT TERM MEMORY (LSTM) |
Walaa Makhlouf, Ruchika Malhotra, |
Volume 11,Issue 10,Year 2020 |
International Journal of Advanced Research in Engineering and Technology |
| 13 |
IMPACT OF SKIRT PRESSING ON THE AERODYNAMIC DRAG OF A BADMINTON SHUTTLECOCK |
Garvit Kukreja, B.B Arora , |
Volume 12,Issue 1,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 14 |
THERMODYNAMIC STUDY OF ADVANCED GAS TURBINE COOLING SYSTEM |
Vimal Tripathi, B.B Arora , |
Volume 12,Issue 1,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 15 |
ADOPTION OF QUALITY MANAGEMENT: THE CASE OF ETHIOPIAN UNIVERSITIES |
Asalf Habtegeorgis, G C Maheshwari , Rajan Yadav, |
Volume 11,Issue 7,Year 2020 |
International Journal of Management |
| 16 |
SIMULATION OF SPRAY DRYER CHAMBER BY THE STANDARD K-Є, RELIABLE K-Є AND REYNOLDS STRESS MODELS USED IN THE PRODUCTION OF THERMAL SPRAY POWDERS |
Qasim Murtaza, |
Volume 1,Issue 1,Year 2010 |
International Journal of Design and Manufacturing Technology |
| 17 |
RESPONSE SURFACE METHODOLOGY & TAGUCHI TECHQUINES TO OPTIMIZATION OF C.N.C. TURNING PROCESS |
Vipin Kumar Sharma, Qasim Murtaza, S.K. Garg , |
Volume 1,Issue 1,Year 2010 |
International Journal of Production Technology and Management |
| 18 |
EFFECT OF WELDING PARAMETER ON MICRO HARDNESS OF SYNERGIC MIG WELDING OF 304L AUSTENITIC STAINLESS STEEL |
Ravi Butola, Shanti Lal Meena, Jitendra Kumar, |
Volume 4,Issue 3,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 19 |
AN EXPERIMENTAL STUDY OF WEAR RESISTANCE OF AL-SIC COATINGS ON STEEL SUBSTRATE |
Dalip Kumar, Antariksha Verma, Sankalp Kulshrestha, |
Volume 4,Issue 6,Year 2013 |
International Journal of Advanced Research in Engineering and Technology |
| 20 |
THEFT DETECTION SCHEMES FOR SMART GRID APPLICATION |
Palak Kalra, |
Volume 5,Issue 12,Year 2014 |
International Journal of Electrical Engineering and Technology |
| 21 |
MULTI-OBJECTIVE HYBRID OPTIMIZATION (DA-AL) FOR EFFICIENT JOB SHOP SCHEDULING |
Vineet Kumar, OmPal Singh, Radhey Shyam Mishra, |
Volume 9,Issue 4,Year 2018 |
International Journal of Advanced Research in Engineering and Technology |
| 22 |
DENTAL AMALGAM - THE POTENTIAL TOXIC EFFECTS OF MERCURY ON ENVIRONMENT AND HUMAN HEALTH. AN EVIDENCE-BASED REVIEW |
Karthik Krishna R, Ramesh Krishnan, Maya Ramesh, |
Volume 9,Issue 4,Year 2018 |
International Journal of Advanced Research in Engineering and Technology |
| 23 |
COMPARISON OF FACTS DEVICES FOR TWO AREA POWER SYSTEM STABILITY ENHANCEMENT USING MATLAB MODELLING |
Naimul Hasan, B.B.Arora , J.N.Rai , |
Volume 5,Issue 8,Year 2014 |
International Journal of Electrical Engineering and Technology |
| 24 |
EVOLUTION IN MANUFACTURING OF GRID STIFFENED STRUCTURES THROUGH CAM AND ADDITIVE TECHNIQUES |
Kshitij Tripathi, Kunal Kukreja, AK Madan , |
Volume 12,Issue 4,Year 2021 |
International Journal of Advanced Research in Engineering and Technology |
| 25 |
SURVIVING INTERNATIONAL COMPETITION: ANALYSIS OF MEASURES EMPLOYED BY LOCAL COMPANIES |
Vanshika Notani, Piyush Jain, |
Volume 12,Issue 6,Year 2021 |
International Journal of Management |
| 26 |
CONFORMAL COOLING FOR MOLDS PRODUCED BY ADDITIVE MANUFACTURING: A REVIEW |
Gurpreet Singh Phull, Sanjeev Kumar, R.S. Walia , |
Volume 9,Issue 1,Year 2018 |
International Journal of Mechanical Engineering and Technology |
| 27 |
MODIFICATION OF THE CASAGRANDE`S EQUATION OF PHREATIC LINE |
A.K. Shrivastava , Anurag Jain, Deepali Kansal, Shashank Gupta, |
Volume 6,Issue 6,Year 2015 |
International Journal of Civil Engineering and Technology |
| 28 |
HEAT FLOW PREDICTION IN FRICTION STIR WELDED ALUMINIUM ALLOY 1100 |
S. Deivanai , Reeta Wattal, Sushila Rani, Surabhi lata, |
Volume 5,Issue 9,Year 2014 |
International Journal of Mechanical Engineering and Technology |
| 29 |
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MILD STEELCOPPER JOINED BY FRICTION WELDING |
Dalip Kumar, Antariksha Verma, Sankalp Kulshrestha, Prithvi Singh, |
Volume 4,Issue 5,Year 2013 |
International Journal of Mechanical Engineering and Technology |
| 30 |
EFFECT OF PUNCH PROFILE RADIUS AND LOCALISED COMPRESSION ON SPRINGBACK IN V-BENDING OF HIGH STRENGTH STEEL AND ITS FEA SIMULATION |
Vijay Gautam, Parveen Kumar, Aadityeshwar Singh Deo, |
Volume 3,Issue 3,Year 2012 |
International Journal of Mechanical Engineering and Technology |
| 31 |
USE OF SUPERPLASTICIZERS IN CONCRETE AND THEIR COMPATIBILITY WITH CEMENTS |
Alok Verma, M. SHUKLA , A. K. SAHU , |
Volume 4,Issue 1,Year 2013 |
International Journal of Civil Engineering and Technology |
| 32 |
EFFECT OF NUMBER OF CLASSES IN A VISUAL RATING FOR SULPHATE ATTACK |
Alok Verma, M. SHUKLA , A. K. SAHU , |
Volume 4,Issue 1,Year 2013 |
International Journal of Civil Engineering and Technology |
| 33 |
STRENGTH & DENSITY OF AN AUTOCLAVED AERATED CONCRETE USING VARIOUS AIR ENTRAINING AGENTS |
Shashank Gupta, Shiva Garg, |
Volume 5,Issue 7,Year 2014 |
International Journal of Civil Engineering and Technology |
| 34 |
DESIGNING, OPTIMIZING AND FABRICATION OF POWERTRAIN FOR THE SUPERMILEAGE VEHICLE |
Anirudh singh, |
Volume 9,Issue 1,Year 2018 |
International Journal of Advanced Research in Engineering and Technology |
| 35 |
ELECTROCHEMO-MAGNETO ABRASIVE FLOW MACHINE SETUP FABRICATION AND EXPERIMENTAL INVESTIGATION OF THE PROCESS ALONGWITH MATHEMATICAL MODELING AND OPTIMIZATION |
Sachin Dhull, Ravinderjit Singh Walia, Qasim Murtaza, Mahendra Singh Niranjan, |
Volume 10,Issue 8,Year 2019 |
Independent Journal of Management & Production |
| 36 |
GST IN INDIAN ECONOMY AND ITS POSSIBLE ROBUSTNESS |
Mehul Gupta, Prashant Sharma, |
Volume 20,Issue 4,Year 2019 |
Journal of Economics and Economic Education Research |
| 37 |
FLY ASH - AS A MAJOR CONSTITUENT OF BRICKS |
Harish , |
Volume 6,Issue 6,Year 2019 |
Global Journal of Engineering Science and Researches |
| 38 |
Analysing the causes of cost overrun in life cycle of construction projects: Contractor`s Perception |
Savita Sharma, Pradeep K.Goyal, Dharam Buddhi, |
Volume 4,Issue Special Issue - TMRI,Year 2019 |
International Journal for Research in Engineering Application & Management |
| 39 |
Implementation Analysis of Solar PV Based SEPIC Inverter System |
Saurabh Kumar, Adeeb Uddin Ahmad, Neevatika Verma, Vikas Verma, Shweta Singh, |
Volume 7,Issue 10,Year 2021 |
International Journal for Modern Trends in Science and Technology |
| 40 |
A Newer Approach to IOT: Green IOT |
Hamender Jain, Neha Goel, |
Volume 7,Issue 3,Year 2021 |
International Journal for Modern Trends in Science and Technology |
| 41 |
Air Quality Index Estimation Based on Image Analysis |
Mohd Ashraf, Niket , Devender , Vinod Kumar, |
Volume 7,Issue 5,Year 2021 |
International Journal for Modern Trends in Science and Technology |
| 42 |
COMPARATIVE ANALYSIS OF VERTICAL AXIS WIND TURBINE: CARBON FIBER VS STRUCTURAL STEEL |
Md Zia Arzoo, Mozammil Hassan, David Simeon, Pushpendra Singh, |
Volume 12,Issue 10,Year 2021 |
International Journal of Mechanical Engineering and Technology |
| 43 |
TECHNO-ECONOMIC COMPARISON OF UASB REACTORS WITH OTHER SEWAGE TREATMENT TECHNOLOGIES IN INDIA |
Puneet Pathak, Bharat Jhamani, Rajbir Singh Rathee, |
Volume 5,Issue 8,Year 2019 |
International Journal for Innovative Research in Multidisciplinary Field |
| 44 |
Performance Analysis and Comparison of Symmetrical and Asymmetrical Dual Stator Induction Generators for Wind Energy Conversion Systems |
Ramesh Singh, Vishal Verma, |
Volume 8,Issue 1,Year 2018 |
Engineering, Technology & Applied Science Research |
| 45 |
A META-REVIEW ON PRINCIPLES OF RECOMBINANT DNA TECHNOLOGY |
Aditya M. Nair, Anslet Mary, Saanya Yadav, |
Volume 10,Issue 4,Year 2021 |
World Journal of Pharmaceutical Research |
| 46 |
FUNDAMENTAL CONCEPTS AND USES OF BIG DATA ANALYTICS |
Khyati Kathuria, |
Volume 4,Issue 1,Year 2019 |
International Engineering Journal For Research & Development |
| 47 |
How Sensitive Is The Indian Government Towards Women Empowerment In India? |
Neha Tomar, Seema Singh, |
Volume 8,Issue 7,Year 2018 |
International Journal of Management, IT & Engineering |
| 48 |
Analysis of Automated text generation using Deep learning |
Manoj Kumar, Arnav Kumar, Abhishek Singh, Ankit Kumar, |
Volume 7,Issue 4,Year 2021 |
International Journal For Research In Advanced Computer Science And Engineering |
| 49 |
LEVERAGING MACHINE LEARNING TECHNIQUES IN THE EFFICACIOUS DETECTION OF `BULLYING WORDS` AS USED ON SOCIAL NETWORKING MEDIA |
Deeya Tangri, |
Volume 20,Issue 2,Year 2020 |
International Journal Of Advances In Engineering Research |
| 50 |
DEVELOPING A MODEL FOR THE EFFECTIVE IDENTIFICATION OF DISEASE IN THE IRIS BASED DATASETS |
Deeya Tangri, |
Volume 5,Issue ,Year 2019 |
International Journal Of Innovations In Applied Sciences And Engineering |
| 51 |
EMPLOYABILITY OF NEURAL NETWORKING TOOLS IN THE EARLY AND EFFECTIVE DETECTION OF DISPERSED REFUSAL OF ADMINISTRATION (DDOS) ATTACK IN INTERNET OF THINGS (IOT) FRAMEWORKS |
Deeya Tangri, |
Volume 5,Issue ,Year 2019 |
International Journal of Inventions in Engineering and Science Technology |
| 52 |
ARTIFICIAL INTELLIGENCE: DEVELOPING SOFTWARE-BASED APPLICATION TO LEVERAGE GENETIC ALGORITHM TO ENHANCE ITS APPLICABILITY IN BUSINESS AND MEDICAL AREAS |
Ruchika Goel, |
Volume 9,Issue ,Year 2019 |
International Journal Of Innovations In Scientific Engineering |
| 53 |
DEVELOPING AN INTEGRATED VOTING SYSTEM BY EMPLOYING THE IRIS DETECTION FRAMEWORK |
Deeya Tangri, |
Volume 8,Issue ,Year 2018 |
International Journal Of Innovations In Scientific Engineering |
| 54 |
AN ANALYTIC STUDY OF PERFORMANCE TUNED SQOOP TO MONITOR THE EFFICACIOUS TRANSFORM BETWEEN SQL AND NOSQL |
Aayush Goel, |
Volume 4,Issue ,Year 2018 |
International Journal Of Innovations In Applied Sciences And Engineering |
| 55 |
EVALUATING THE EFFECTIVENESS OF KEY ALGORITHMS OF PATTERN MATCHING TO ENHANCE THE EFFICACY OF BOYER-MOORE-HORSPOOL ALGORITHM AND RABIN KARP ALGORITHM IN MALICIOUS PROGRAM DETECTION |
Ruchika Goel, |
Volume 4,Issue ,Year 2018 |
International Journal Of Innovations In Applied Sciences And Engineering |
| 56 |
An In-Depth Analysis of The Data Mining Algorithms and Their Effective Applicability in Health and Biomedical Informatics |
Deeya Tangri, |
Volume 11,Issue ,Year 2021 |
International Journal Of Research In Medical Sciences And Technology |
| 57 |
Leveraging the Machine Learning Tools and Techniques for Enhancing the Efficiency of Safeguards for Cyber Security |
Deeya Tangri, |
Volume 10,Issue 4,Year 2020 |
International Journal Of Research In Science And Technology |
| 58 |
SYNTHESIS AND CHARACTERIZATION OF CALCIUM CARBONATE NANOPARTICLES AND THEIR EFFECT ON VEGETABLE OIL BASED POLYURETHANE ADHESIVE |
Nakul Dabas, |
Volume 8,Issue 1,Year 2018 |
International Journal Of Research In Science And Technology |
| 59 |
Determinants Of Job Opportunities In Skill Development Institutions: Indian Perspective |
Manoj Kumar, Suresh Kumar Garg, Shraddha Mishra, |
Volume 11,Issue 1,Year 2021 |
MIER Journal of Educational Studies Trends and Practices |
| 60 |
SELECTION OF METHODS OF PASSAGE |
Nakul Dabas, |
Volume 8,Issue 1,Year 2018 |
International Journal Of Transformations In Business Management |
| 61 |
TECHNICAL ANALYSIS OF POWER GENERATION USING VERTICAL AXIS WIND TURBINES ON METRO TRACKS |
Md Zia Arzoo, Mozammil Hassan, David Simeon, Pushpendra Singh, |
Volume 13,Issue 3,Year 2022 |
International Journal of Mechanical Engineering and Technology |
| 62 |
Enabling Delay Tolerance in IoT based Vehicular Networks |
Aditya Sharma, Akash Maan, |
Volume 10,Issue 1,Year 2022 |
International Journal of Scientific Research in Computer Science and Engineering |
| 63 |
Ae-RF- An Enhanced Methodology for Just In Time Software Defect Detection |
Ruchika Malhotra, Bibi Aisha Nazari, |
Volume 8,Issue 4,Year 2020 |
International Journal of Scientific Research in Computer Science and Engineering |
| 64 |
Thermodynamic Analysis of Waste to Wealth Conversion |
Mukesh Kumar, S.K. Singh , |
Volume 7,Issue 1,Year 2021 |
International Journal of Scientific Research In Multidisciplinary Studies |
| 65 |
Toxicity and Challenges of Nanomaterials and Their Impact on the Environment |
Sakshi Awasthi, Jai Gopal Sharma, |
Volume 21,Issue 2,Year 2022 |
Nature Environment and Pollution Technology |
| 66 |
Delineation of Groundwater, Drought and Flood Potential Zone Using Weighted Index Overlay Analysis and GIS for District Patna, Bihar, India |
Nikhilesh Gaurav, Geeta Singh, |
Volume 21,Issue 2,Year 2022 |
Nature Environment and Pollution Technology |
| 67 |
SEM-EDAX analysis of the Soil Samples of River Yamuna in Delhi Region |
Jai Gopal Sharma, Vivek Chopra, |
Volume 20,Issue 1,Year 2021 |
Nature Environment and Pollution Technology |
| 68 |
MINIMIZING DISSONANCE THROUGH OPTIMUM TIME-LAPSE IN ONLINE IMPULSE BUYING |
Rajan Yadav, Jyoti Tandon, Saurabh Agrawal, |
Volume 26,Issue 6,Year 2022 |
Academy of Marketing Studies Journal |
| 69 |
DESIGNING OF A TWO STAGE TO ORBIT LAUNCH VEHICLE |
Prakash Budhaulia, Raj Kumar Singh, Priyanshu Nailwal, Rahul Kumar, |
Volume 14,Issue 3,Year 2023 |
International Journal of Advanced Research in Engineering and Technology |
| 70 |
A STUDY ON CHALLENGES IN UAVS AND DRONE INDUSTRY: A WORK ON PUBLIC ACCEPTANCE ANALYSIS |
Shivam Kumar, Samardeep Singh, Shantanu Shivam Pandey, |
Volume 14,Issue 3,Year 2023 |
International Journal of Mechanical Engineering and Technology |
| 71 |
POWER FACTOR ANALYSIS AND IMPROVEMENT FOR INDUCTIVE LOAD |
N.K. Jain , Lakshay Kumar, Mayank , Naman , |
Volume 14,Issue 3,Year 2023 |
International Journal of Electrical Engineering and Technology |
| 72 |
NETWORK TRAFFIC-BASED INTRUSION DETECTION USING MULTISURF-ENHANCED FEATURE SELECTION AND MACHINE LEARNING MODELS |
Mehul Kumar, Himanshu Chaudhary, Mohd Danish, |
Volume 16,Issue 3,Year 2025 |
International Journal of Computer Engineering and Technology |
